Setting a best practice for determining the EGR rate in hydrogen internal combustion engines

Exhaust gas recirculation (EGR) is an effective way to reduce NOx-emissions and increase the efficiency of hydrogen fueled internal combustion engines. Knowledge of the exact amount of EGR is crucial to understand the effects of EGR. As the exhaust gas flow is pulsating and chemically aggressive, the flow rate is typically not measured directly and has to be derived from other quantities. For hydrocarbon fuels, the EGR rate is generally calculated from a molar CO2 balance, but for hydrogen engines this obviously cannot be used as there are no CO2 emissions, and consequently no standard practice has been established. This work considers three methods to calculate the amount of EGR in a hydrogen engine. The first one is based upon a volume balance in the mixing section of exhaust gases and fresh air. The second and third method uses a molar balance of O-2 and H2O respectively in this mixing section. The three methods are developed and tested for their accuracy with an error analysis. Additionally, the methods are applied to an experimental dataset gathered on a single cylinder hydrogen engine. Both the theoretical analysis and the experimental results confirm the method based on an O-2 molar balance as the most accurate one. The least practical method is the one based on an H2O balance as it requires additional relative humidity sensors and is less accurate than the others

Enhanced Thermal Conductivity of Free-Standing Double-Walled Carbon Nanotube Networks

Nanomaterials are driving advances in technology due to their oftentimes superior properties over bulk materials. In particular, their thermal properties become increasingly important as efficient heat dissipation is required to realize high-performance electronic devices, reduce energy consumption, and prevent thermal damage. One application where nanomaterials can play a crucial role is extreme ultraviolet (EUV) lithography, where pellicles that protect the photomask from particle contamination have to be transparent to EUV light, mechanically strong, and thermally conductive in order to withstand the heat associated with high-power EUV radiation. Free-standing carbon nanotube (CNT) films have emerged as candidates due to their high EUV transparency and ability to withstand heat. However, the thermal transport properties of these films are not well understood beyond bulk emissivity measurements. Here, we measure the thermal conductivity of free-standing CNT films using all-optical Raman thermometry at temperatures between 300 and 700 K. We find thermal conductivities up to 50 W m-1 K-1 for films composed of double-walled CNTs, which rises to 257 W m-1 K-1 when considering the CNT network alone. These values are remarkably high for randomly oriented CNT networks, roughly seven times that of single-walled CNT films. The enhanced thermal conduction is due to the additional wall, which likely gives rise to additional heat-carrying phonon modes and provides a certain resilience to defects. Our results demonstrate that free-standing double-walled CNT films efficiently dissipate heat, enhancing our understanding of these promising films and how they are suited to applications in EUV lithography.</p

Enhanced Thermal Conductivity of Free-Standing Double-Walled Carbon Nanotube Networks

Nanomaterials are driving advances in technology due to their oftentimes superior properties over bulk materials. In particular, their thermal properties become increasingly important as efficient heat dissipation is required to realize high-performance electronic devices, reduce energy consumption, and prevent thermal damage. One application where nanomaterials can play a crucial role is extreme ultraviolet (EUV) lithography, where pellicles that protect the photomask from particle contamination have to be transparent to EUV light, mechanically strong, and thermally conductive in order to withstand the heat associated with high-power EUV radiation. Free-standing carbon nanotube (CNT) films have emerged as candidates due to their high EUV transparency and ability to withstand heat. However, the thermal transport properties of these films are not well understood beyond bulk emissivity measurements. Here, we measure the thermal conductivity of free-standing CNT films using all-optical Raman thermometry at temperatures between 300 and 700 K. We find thermal conductivities up to 50 W m-1 K-1 for films composed of double-walled CNTs, which rises to 257 W m-1 K-1 when considering the CNT network alone. These values are remarkably high for randomly oriented CNT networks, roughly seven times that of single-walled CNT films. The enhanced thermal conduction is due to the additional wall, which likely gives rise to additional heat-carrying phonon modes and provides a certain resilience to defects. Our results demonstrate that free-standing double-walled CNT films efficiently dissipate heat, enhancing our understanding of these promising films and how they are suited to applications in EUV lithography.</p

The ALS/FTD-related C9orf72 hexanucleotide repeat expansion forms RNA condensates through multimolecular G-quadruplexes

Amyotrophic lateral sclerosis (ALS) and frontotemporal dementia (FTD) are neurodegenerative diseases that exist on a clinico-pathogenetic spectrum, designated ALS/FTD. The most common genetic cause of ALS/FTD is expansion of the intronic hexanucleotide repeat (GGGGCC)n in C9orf72. Here, we investigate the formation of nucleic acid secondary structures in these expansion repeats, and their role in generating condensates characteristic of ALS/FTD. We observe significant aggregation of the hexanucleotide sequence (GGGGCC)n, which we associate to the formation of multimolecular G-quadruplexes (mG4s) by using a range of biophysical techniques. Exposing the condensates to G4-unfolding conditions leads to prompt disassembly, highlighting the key role of mG4-formation in the condensation process. We further validate the biological relevance of our findings by detecting an increased prevalence of G4-structures in C9orf72 mutant human motor neurons when compared to healthy motor neurons by staining with a G4-selective fluorescent probe, revealing signal in putative condensates. Our findings strongly suggest that RNA G-rich repetitive sequences can form protein-free condensates sustained by multimolecular G-quadruplexes, highlighting their potential relevance as therapeutic targets for C9orf72 mutation-related ALS/FTD

Enteric coated HPMC capsules plugged with 5-FU loaded microsponges: a potential approach for treatment of colon cancer

The work was aimed at developing novel enteric coated HPMC capsules (ECHC) plugged with 5 Florouracil (5-FU) loaded Microsponges in combination with calcium pectinate beads. Modified quasi-emulsion solvent diffusion method was used to formulate microsponges based on 32 factorial design and the effects of independent variables (volume of organic solvent and Eudragit RS100 content) on the dependent variables (Particle size, %EE & % CDR) were determined. The optimized microsponges (F4) were characterized by SEM, PXRD, TGA and were plugged along with calcium pectinate beads in HPMC capsules and the HPMC capsules were further coated with enteric polymer Eudragit L 100 (Ed-L100) and/ or Eudrgit S 100 (Ed-S 100) in different proportions. In vitro release study of ECHC was performed in various release media sequentially SGF for 2 h, followed by SIF for the next 6 h and then in SCF (in the presence and absence of pectinase enzyme for further 16 h). Drug release was retarded on coating with EdS-100 in comparison to blend of EdS-100: EdL-100 coating. The percentage of 5-FU released at the end of 24 h from ECHC 3 was 97.83 ± 0.12% in the presence of pectinase whereas in control study it was 40.08 ± 0.02% drug. The optimized formulation was subjected to in vivo Roentgenographic studies in New Zealand white rabbits to analyze the in vivo behavior of the developed colon targeted capsules. Pharmacokinetic studies in New Zealand white rabbits were conducted to determine the extent of systemic exposure provided by the developed formulation in comparison to 5-FU aqueous solutions. Thus, enteric coated HPMC capsules plugged with 5-FU loaded microsponges and calcium pectinate beads proved to be promising dosage form for colon targeted drug delivery to treat colorectal cancer

Extensive microbial and functional diversity within the chicken cecal microbiome

Chickens are major source of food and protein worldwide. Feed conversion and the health of chickens relies on the largely unexplored complex microbial community that inhabits the chicken gut, including the ceca. We have carried out deep microbial community profiling of the microbiota in twenty cecal samples via 16S rRNA gene sequences and an in-depth metagenomics analysis of a single cecal microbiota. We recovered 699 phylotypes, over half of which appear to represent previously unknown species. We obtained 648,251 environmental gene tags (EGTs), the majority of which represent new species. These were binned into over two-dozen draft genomes, which included Campylobacter jejuni and Helicobacter pullorum. We found numerous polysaccharide- and oligosaccharide-degrading enzymes encoding within the metagenome, some of which appeared to be part of polysaccharide utilization systems with genetic evidence for the co-ordination of polysaccharide degradation with sugar transport and utilization. The cecal metagenome encodes several fermentation pathways leading to the production of short-chain fatty acids, including some with novel features. We found a dozen uptake hydrogenases encoded in the metagenome and speculate that these provide major hydrogen sinks within this microbial community and might explain the high abundance of several genera within this microbiome, including Campylobacter, Helicobacter and Megamonas