975 research outputs found
Controlling Entanglement Dynamics by Choosing Appropriate Ratio between Cavity-Fiber Coupling and Atom-Cavity Coupling
The entanglement characteristics including the so-called sudden death effect
between two identical two-level atoms trapped in two separate cavities
connected by an optical fiber are studied. The results show that the time
evolution of entanglement is sensitive not only to the degree of entanglement
of the initial state but also to the ratio between cavity-fiber coupling () and
atom-cavity coupling (). This means that the entanglement dynamics can be
controlled by choosing specific v and g.Comment: 14pages, 3figures, conferenc
Tight Coupling Dual-Band Coupler With Large Frequency Ratio and Arbitrary Power Division Ratios Over Two Bands
To satisfy the requirements of the emerging wireless communication system, the simultaneous implementation of large frequency ratio and tight coupling is demanded for a dual-band coupler. But most of the existing dual-band coupler structures can only achieve one of them. In this paper, a new coupled line based dual-band coupler structure is proposed. The detailed theoretical analysis is conducted for different ranges of frequency ratio. It was shown that a wide frequency ratio from 1.4 to 11.7 can be achieved even for the designs which require a tight coupling of 3 dB. For higher flexibility, the same circuit topology is further investigated to implement the arbitrary power division ratios over the two bands. More importantly, the design parameters for the large frequency ratio and arbitrary power division ratio are found to be almost independent resulting in a simple design procedure. For demonstration purposes, a dual-band 3 dB coupler with a large frequency ratio of 6 is designed, fabricated and measured. Furthermore, another dual-band coupler with coupling coefficients of 3 dB and 6 dB at 2 GHz and 4 GHz is designed, fabricated and measured. Good agreement between simulation and measurement can be observed for both prototypes.11Ysciescopu
Effect of Na doping on flux pinning of YBa1.9Na0.1Cu3O7-d
We have prepared Na-doped YBa2Cu3Oy (YBa1.9Na0.1Cu3Oy +40mol%Y211) (YBNCO)
and Na-free YBa2Cu3Oy (YBCO) samples by the Melt-Textured Growth (MTG) method
to study the effect of doped Na ion on flux pinning. The ac susceptibility
curves (acs) as well as the hysteresis loops were measured for the samples.
Then the effective pinning energy (U(T,Hdc,J)), irreversibility line (Hirr(T))
and critical current density (jc(Hdc)) were determined, where T, Hdc and J are
temperature, dc magnetic field and current density, respectively. We found
that, with Na doping, the Hirr(T) line shifted to lower temperature while the
Jc(Hdc) and U(T,Hdc,J) became smaller. It indicates that the Na ions play a
negative role in the flux pinning of YBCO. The appearance of the second peak in
the Jc(Hdc) curves and the enhancement of anisotropy in YBNCO further support
this finding.Comment: 7 pages, 7figures. Submited to Physica.
The influence of nonlinearities on the symmetric hydrodynamic response of a 10,000 TEU Container ship
The prediction of wave-induced motions and loads is of great importance for the design of marine structures. Linear potential flow hydrodynamic models are already used in different parts of the ship design development and appraisal process. However, the industry demands for design innovation and the possibilities offered by modern technology imply the need to also understand the modelling assumptions and associated influences of nonlinear hydrodynamic actions on ship response. At first instance, this paper presents the taxonomy of different Fluid Structure Interaction (FSI) methods that may be used for the assessment of ship motions and loads. Consequently, it documents in a practical way the effects of weakly nonlinear hydrodynamics on the symmetric wave-induced responses for a 10,000TEU Container ship. It is shown that the weakly nonlinear FSI models may be useful for the prediction of symmetric wave-induced loads and responses of such ship not only in way of amidships but also at the extremities of the hull. It is concluded that validation of hydrodynamic radiation and diffraction forces and their respective influence on ship response should be especially considered for those cases where the variations of the hull wetted surface in time may be noticeable
Studying Precipitation Processes in WRF with Goddard Bulk Microphysics in Comparison with Other Microphysical Schemes
A Goddard bulk microphysical parameterization is implemented into the Weather Research and Forecasting (WRF) model. This bulk microphysical scheme has three different options, 2ICE (cloud ice & snow), 3ICE-graupel (cloud ice, snow & graupel) and 3ICE-hail (cloud ice, snow & hail). High-resolution model simulations are conducted to examine the impact of microphysical schemes on different weather events: a midlatitude linear convective system and an Atlantic hurricane. The results suggest that microphysics has a major impact on the organization and precipitation processes associated with a summer midlatitude convective line system. The Goddard 3ICE scheme with the cloud ice-snow-hail configuration agreed better with observations ill of rainfall intensity and having a narrow convective line than did simulations with the cloud ice-snow-graupel and cloud ice-snow (i.e., 2ICE) configurations. This is because the Goddard 3ICE-hail configuration has denser precipitating ice particles (hail) with very fast fall speeds (over 10 m/s) For an Atlantic hurricane case, the Goddard microphysical scheme (with 3ICE-hail, 3ICE-graupel and 2ICE configurations) had no significant impact on the track forecast but did affect the intensity slightly. The Goddard scheme is also compared with WRF's three other 3ICE bulk microphysical schemes: WSM6, Purdue-Lin and Thompson. For the summer midlatitude convective line system, all of the schemes resulted in simulated precipitation events that were elongated in southwest-northeast direction in qualitative agreement with the observed feature. However, the Goddard 3ICE-hail and Thompson schemes were closest to the observed rainfall intensities although the Goddard scheme simulated more heavy rainfall (over 48 mm/h). For the Atlantic hurricane case, none of the schemes had a significant impact on the track forecast; however, the simulated intensity using the Purdue-Lin scheme was much stronger than the other schemes. The vertical distributions of model-simulated cloud species (e.g., snow) are quite sensitive to the microphysical schemes, which is an issue for future verification against satellite retrievals. Both the Purdue-Lin and WSM6 schemes simulated very little snow compared to the other schemes for both the midlatitude convective line and hurricane case. Sensitivity tests with these two schemes showed that increasing the snow intercept, turning off the auto-conversion from snow to graupel, eliminating dry growth, and reducing the transfer processes from cloud-sized particles to precipitation-sized ice collectively resulted in a net increase in those schemes' snow amounts
Development of black ice prediction model using GIS-based multi-sensor model validation
Fog, freezing rain, and snow (melt) quickly condense on road surfaces, forming black ice that is difficult to identify and causes major accidents on highways. As a countermeasure to prevent icing car accidents, it is necessary to predict the amount and location of black ice. This study advanced previous models through machine learning and multi-sensor-verified results. Using spatial (hill shade, river system, bridge, and highway) and meteorological (air temperature, cloudiness, vapour pressure, wind speed, precipitation, snow cover, specific heat, latent heat, and solar radiation energy) data from the study area (SuncheonβWanju Highway in Gurye-gun, Jeollanam-do, South Korea), the amount and location of black ice were modelled based on system dynamics to predict black ice and then simulated with a geographic information system in units of square metres. The intermediate factors calculated as input factors were road temperature and road moisture, modelled using a deep neural network (DNN) and numerical methods. Considering the results of the DNN, the root mean square error was improved by 148.6β% and reliability by 11.43β% compared to a previous study (linear regression). Based on the model results, multiple sensors were buried at four selected points in the study area. The model was compared with sensor data and verified with the upper-tailed test (with a significance level of 0.05) and fast Fourier transform (freezing does not occur when frequencyβ=β0.00001βHz). Results of the verified simulation can provide valuable data for government agencies like road traffic authorities to prevent traffic accidents caused by black ice
Sustainable cooling method for machining titanium alloy
Hard to machine materials such as Titanium Alloy TI-6AI-4V Grade 5 are notoriously known to generate high temperatures and adverse reactions between the workpiece and the tool tip materials. These conditions all contribute to an increase in the wear mechanisms, reducing tool life. Titanium Alloy, for example always requires coolant to be used during machining. However, traditional flood cooling needs to be replaced due to environmental issues, and an alternative cooling method found that has minimum impact on the environment. For true sustainable cooling of the tool it is necessary to account for all energy used in the cooling process, including the energy involved in producing the coolant. Previous research has established that efficient cooling of the tool interface improves the tool life and cutting action. The objective of this research is to determine the most appropriate sustainable cooling method that can also reduce the rate of wear at the tool interface
Mechanical Properties of Dissimilar A356/SAPH440 Lap Joints by the Friction Stir Spot Welding and Self-Piercing Riveting
Aluminum alloy A356-T6 and automotive steel sheet SAPH440 were joined using friction stir spot welding and self-piercing riveting. The maximum tensile shear strength values in weld joints were approximately 3.5 kN at a rotation speed of 500 rpm and plunge depth of 1.0 mm. It was confirmed that the intermetallic compound layer of weld joints below 9.23 m did not exceed the permissible thickness 10 m of AlβFe joints. The self-piercing riveting joints exhibited maximum tensile- shear strength of 7.9 kN, which was higher than that of the weld joints. However, during the riveting process, cracking appeared in the joint on the aluminum side, which was caused by lack of ductility of cast aluminum. In addition, it was observed that the cracks on the aluminum side were getting larger, as the radius of the lower mold increased.ΠΠ»ΡΠΌΠΈΠ½ΠΈΠ΅Π²ΡΠΉ ΡΠΏΠ»Π°Π² Π356-Π’6 ΠΈ Π°Π²ΡΠΎΠΌΠΎΠ±ΠΈΠ»ΡΠ½ΡΡ Π»ΠΈΡΡΠΎΠ²ΡΡ ΡΡΠ°Π»Ρ SAPH440 ΡΠΎΠ΅Π΄ΠΈΠ½ΡΠ»ΠΈ Ρ ΠΏΠΎΠΌΠΎΡΡΡ ΡΠΎΡΠ΅ΡΠ½ΠΎΠΉ ΡΠΎΡΠ°ΡΠΈΠΎΠ½Π½ΠΎΠΉ ΡΠ²Π°ΡΠΊΠΈ ΡΡΠ΅Π½ΠΈΠ΅ΠΌ ΠΈ ΡΠ°ΠΌΠΎΠΏΡΠΎΠ±ΠΈΠ²Π½ΠΎΠΉ ΠΊΠ»Π΅ΠΏΠΊΠΈ. ΠΠ°ΠΊΡΠΈΠΌΠ°Π»ΡΠ½ΡΠΉ ΠΏΡΠ΅Π΄Π΅Π» ΠΏΡΠΎΡΠ½ΠΎΡΡΠΈ Π½Π° ΡΠ΄Π²ΠΈΠ³ ΠΏΡΠΈ ΡΠ°ΡΡΡΠΆΠ΅Π½ΠΈΠΈ Π΄Π»Ρ ΡΠ²Π°ΡΠ½ΡΡ
ΡΠΎΠ΅Π΄ΠΈΠ½Π΅Π½ΠΈΠΉ ΡΠΎΡΡΠ°Π²Π»ΡΠ» ΠΏΡΠΈΠΌΠ΅ΡΠ½ΠΎ 3,5 ΠΊΠ ΠΏΡΠΈ ΡΠΊΠΎΡΠΎΡΡΠΈ Π²ΡΠ°ΡΠ΅Π½ΠΈΡ 500 ΠΎΠ±/ΠΌΠΈΠ½ ΠΈ Π³Π»ΡΠ±ΠΈΠ½Π΅ ΠΏΡΠΎΠ½ΠΈΠΊΠ½ΠΎΠ²Π΅Π½ΠΈΡ 1,0 ΠΌΠΌ. ΠΠΎΠΊΠ°Π·Π°Π½ΠΎ, ΡΡΠΎ ΡΠ»ΠΎΠΉ ΠΈΠ½ΡΠ΅ΡΠΌΠ΅ΡΠ°Π»Π»ΠΈΠ΄ΠΎΠ² ΡΠ²Π°ΡΠ½ΡΡ
ΡΠΎΠ΅Π΄ΠΈΠ½Π΅Π½ΠΈΠΉ ΡΠΎΠ»ΡΠΈΠ½ΠΎΠΉ ΠΌΠ΅Π½Π΅Π΅ 9,23 ΠΌΠΊΠΌ Π½Π΅ ΠΏΡΠ΅Π²ΡΡΠ°Π» Π΄ΠΎΠΏΡΡΡΠΈΠΌΡΠΉ ΡΡΠΎΠ²Π΅Π½Ρ Π² 10 ΠΌΠΊΠΌ Π΄Π»Ρ ΡΠΎΠ΅Π΄ΠΈΠ½Π΅Π½ΠΈΠΉ AlβFe. ΠΠ»Π΅ΠΏΠ°Π½ΡΠ΅ ΡΠΎΠ΅Π΄ΠΈΠ½Π΅Π½ΠΈΡ ΠΈΠΌΠ΅Π»ΠΈ ΠΏΡΠ΅Π΄Π΅Π» ΠΏΡΠΎΡΠ½ΠΎΡΡΠΈ 7,9 ΠΊΠ Π² ΠΎΡΠ»ΠΈΡΠΈΠ΅ ΠΎΡ ΡΠ²Π°ΡΠ½ΡΡ
ΡΠΎΠ΅Π΄ΠΈΠ½Π΅Π½ΠΈΠΉ. ΠΠ΄Π½Π°ΠΊΠΎ ΠΏΡΠΈ ΠΊΠ»Π΅ΠΏΠΊΠ΅ Π½Π° Π°Π»ΡΠΌΠΈΠ½ΠΈΠΈ ΠΏΠΎΡΠ²Π»ΡΠ»ΠΈΡΡ ΡΡΠ΅ΡΠΈΠ½Ρ Π²Π²ΠΈΠ΄Ρ Π½ΠΈΠ·ΠΊΠΎΠΉ ΠΏΠ»Π°ΡΡΠΈΡΠ½ΠΎΡΡΠΈ Π»ΠΈΡΠΎΠ³ΠΎ ΠΌΠ°ΡΠ΅ΡΠΈΠ°Π»Π°, ΠΏΡΠΈ ΡΡΠΎΠΌ ΡΡΠ΅ΡΠΈΠ½Ρ ΠΏΠΎΠ΄ΡΠ°ΡΡΠ°Π»ΠΈ ΠΏΠΎ ΠΌΠ΅ΡΠ΅ ΡΠ²Π΅Π»ΠΈΡΠ΅Π½ΠΈΡ ΡΠ°Π΄ΠΈΡΡΠ° Π½ΠΈΠΆΠ½Π΅ΠΉ ΡΠΎΡΠΌΡ
Pair Production of the Lightest Chargino via Gluon-Gluon Collisions
The production of the lightest chargino pair from gluon-gluon fusion is
studied in the minimal supersymmetric model(MSSM) at proton-proton colliders.
We find that with the chosen parameters, the production rate of the subprocess
can be over 2.7 femto barn when the chargino is higgsino-like, and the
corresponding total cross section in proton-proton collider can reach 56 femto
barn at the LHC in the CP-conserving MSSM. It shows that this loop mediated
subprocess can be competitive with the standard Drell-Yan subprocess in
proton-proton colliders, especially at the LHC. Furthermore, our calculation
shows it would be possible to extract information about some CP-violating phase
parameters, if we collected enough chargino pair events.Comment: 39 pages, LaTex, 8 figure
Dynamic de novo heterochromatin assembly and disassembly at replication forks ensures fork stability
Chromatin is dynamically reorganized when DNA replication forks are challenged. However, the process of epigenetic reorganization and its implication for fork stability is poorly understood. Here we discover a checkpoint-regulated cascade of chromatin signalling that activates the histone methyltransferase EHMT2/G9a to catalyse heterochromatin assembly at stressed replication forks. Using biochemical and single molecule chromatin fibre approaches, we show that G9a together with SUV39h1 induces chromatin compaction by accumulating the repressive modifications, H3K9me1/me2/me3, in the vicinity of stressed replication forks. This closed conformation is also favoured by the G9a-dependent exclusion of the H3K9-demethylase JMJD1A/KDM3A, which facilitates heterochromatin disassembly upon fork restart. Untimely heterochromatin disassembly from stressed forks by KDM3A enables PRIMPOL access, triggering single-stranded DNA gap formation and sensitizing cells towards chemotherapeutic drugs. These findings may help in explaining chemotherapy resistance and poor prognosis observed in patients with cancer displaying elevated levels of G9a/H3K9me3.</p
- β¦