24,063 research outputs found
Vibration damping system Patent
Vibration damping system operating in low vacuum environment for spacecraft mechanism
High temperature strain gage apparent strain compensation
Once an installed strain gage is connected to a strain indicating device and the instrument is balanced, a subsequent change in temperature of the gage installation will generally produce a resistance change in the gage. This purely temperature-induced resistance will be registered by the indicating device as a strain and is referred to as 'apparent strain' to distinguish it from strain due to applied stress. One desirable technique for apparent strain compensation is to employ two identical gages with identical mounting procedures which are connected with a 'half bridge' configuration where gages see the same thermal environment but only one experiences a mechanical strain input. Their connection in adjacent arms of the bridge will then balance the thermally induced apparent strains and, in principle, only the mechanical strain remains. Two approaches that implement this technique are discussed
Advances in large-diameter liquid encapsulated Czochralski GaAs
The purity, crystalline perfection, and electrical properties of n- and p-type GaAs crystals grown by the liquid encapsulated Czochralski (LEC) technique are evaluated. The determination of the dislocation density, incidence of twinning, microstructure, background purity, mobility, and minority carrier diffusion length is included. The properties of the LEC GaAs crystals are generally comparable to, if not superior to those of small-diameter GaAs material grown by conventional bulk growth techniques. As a result, LEC GaAs is suitable for application to minority carrier devices requiring high-quality and large-area substrates
High purity low dislocation GaAs single crystals
Recent advances in GaAs bulk crystal growth using the LEC (liquid encapsulated Czochralski) technique are described. The dependence of the background impurity concentration and the dislocation density distribution on the materials synthesis and growth conditions were investigated. Background impurity concentrations as low as 4 x 10 to the 15th power were observed in undoped LEC GaAs. The dislocation density in selected regions of individual ingots was very low, below the 3000 cm .3000/sq cm threshold. The average dislocation density over a large annular ring on the wafers fell below the 10000/sq cm level for 3 inch diameter ingots. The diameter control during the program advanced to a diameter variation along a 3 inch ingot less than 2 mm
Anisotropy, disorder, and superconductivity in CeCu2Si2 under high pressure
Resistivity measurements were carried out up to 8 GPa on single crystal and
polycrystalline samples of CeCu2Si2 from differing sources in the homogeneity
range. The anisotropic response to current direction and small uniaxial
stresses was explored, taking advantage of the quasi-hydrostatic environment of
the Bridgman anvil cell. It was found that both the superconducting transition
temperature Tc and the normal state properties are very sensitive to uniaxial
stress, which leads to a shift of the valence instability pressure Pv and a
small but significant change in Tc for different orientations with respect to
the tetragonal c-axis. Coexistence of superconductivity and residual
resistivity close to the Ioffe-Regel limit around 5 GPa provides a compelling
argument for the existence of a valence-fluctuation mediated pairing
interaction at high pressure in CeCu2Si2.Comment: 12 pages, 7 figure
Recommended from our members
The Differences in Antibiotic Decision-making Between Acute Surgical and Acute Medical Teams: An Ethnographic Study of Culture and Team Dynamics
Background
Cultural and social determinants influence antibiotic decision-making in hospitals. We investigated and compared cultural determinants of antibiotic decision-making in acute medical and surgical specialties.
Methods
An ethnographic observational study of antibiotic decision-making in acute medical and surgical teams at a London teaching hospital was conducted (August 2015–May 2017). Data collection included 500 hours of direct observations, and face-to-face interviews with 23 key informants. A grounded theory approach, aided by Nvivo 11 software, analyzed the emerging themes. An iterative and recursive process of analysis ensured saturation of the themes. The multiple modes of enquiry enabled cross-validation and triangulation of the findings.
Results
In medicine, accepted norms of the decision-making process are characterized as collectivist (input from pharmacists, infectious disease, and medical microbiology teams), rationalized, and policy-informed, with emphasis on de-escalation of therapy. The gaps in antibiotic decision-making in acute medicine occur chiefly in the transition between the emergency department and inpatient teams, where ownership of the antibiotic prescription is lost. In surgery, team priorities are split between 3 settings: operating room, outpatient clinic, and ward. Senior surgeons are often absent from the ward, leaving junior staff to make complex medical decisions. This results in defensive antibiotic decision-making, leading to prolonged and inappropriate antibiotic use.
Conclusions
In medicine, the legacy of infection diagnosis made in the emergency department determines antibiotic decision-making. In surgery, antibiotic decision-making is perceived as a nonsurgical intervention that can be delegated to junior staff or other specialties. Different, bespoke approaches to optimize antibiotic prescribing are therefore needed to address these specific challenges
Rumen function and digestion parameters associated with differences between sheep in methane emissions when fed chaffed lucerne hay
An indoor experiment involving 10 rumen-cannulated Romney sheep was conducted in May and June 1998 at AgResearch Grasslands, Palmerston North, New Zealand, under restricted feeding conditions. in order to test the hypothesis that animal factors, in particular rumen fractional outflow rate (FOR) and rumen volume, have an influence on the between-sheep variation in methane (CH4) emission. Sheep were fed 2-hourly on chaffed lucerne hay. Following an acclimatization period of 21 days, the experiment lasted 16 days. Energy and nitrogen (N) balances were measured on days 1-6. Cr-EDTA marker was continuously infused into the rumen from day 9 to 16, and rumen contents emptied and sampled on days 13 and 16. Particulate and fluid FOR were estimated using feed lignin and Cr-EDTA, respectively. Daily CH, production was measured by the sulphur hexafluoride tracer technique on days 2, 5, 6, 12 and 15 of the experiment.
CH4 production (g/day) was positively correlated with the pool size of organic matter (OM) in the rumen (OM pool, g) (r = 0.84, P = 0.002), OM intake (OMI, g/day) (r = 0.67, P = 0.04), and the rumen fill (g. wet digesta) (r = 0.76, P = 0.01). Multiple regression analysis showed that CH4 production was best predicted (R-2 = 0.88) as a function of OM pool and the molar % of butyrate; however, OM pool alone accounted for a large proportion (R-2 = 0.71) of the variation in CH4 production.
CH4 yield (% gross energy intake, % GEI) was negatively correlated with the particulate FOR (%/h) ( r= -0.75, P = 0.01) and buffering capacity of rumen fluid (mmol HCl) (r = -0.72, P = 0.02) but positively correlated with the digestibility of cellulose (r = 0.66, P = 0.04). Multiple regression analysis showed that CH, yield was best predicted as a function of particulate FOR, OMI (g/kg liveweight(0.75)) and the molar % of butyrate (R-2 = 0.88). Particulate FOR alone explained a large proportion (R-2 = 0.57) of the variation in CH4 Yield. Particulate FOR was negatively correlated with rumen fill (r = -0.69, P = 0.03) and digestibility of cellulose (r = -0.65, P = 0.04).
These results suggest that sheep with lower rumen particulate FOR (i.e. longer rumen retention times) had larger rumen fills and higher fibre digestibilities and CH4 yields. If rumen particulate FOR is to be used as a tool for CH4 mitigation, the repeatability of its relationship to CH4 emission must be assessed, preferably under grazing conditions
Persistence of differences between sheep in methane emission under generous grazing conditions
Four low and four high methane (CH4) emitters were selected from a flock of 20 Romney sheep on the basis of CH4 production rates per unit of intake, measured at grazing using the sulphur hexafluoride (SF,) tracer technique. Methane emissions from these sheep were monitored at grazing for four periods (P): October, November, January and February 1999/2000. All measurements were carried out on perennial ryegrass/white clover pasture under generous herbage allowance, and the sheep were maintained on similar pastures during non-measurement periods. The tracer technique was used for all the CH4 measurements and feed DM intake was calculated from total faecal collection and estimated DM digestibility. Data for liveweight (LW), gross energy intake (GEI) and CH4 emission were analysed using split-plot analysis of variance. In addition, a between-period rank order correlation analysis was carried out for CH4 emission data.
Low CH4 emitters were heavier (P < 0.05) than the high emitters in all the periods, but they did not differ (P < 0.05) in their gross energy intakes (GEL MJ/kg LW0.75). Low and high CH4 emitters consistently maintained their initial rankings in CH4 yield (% GEI) throughout the subsequent periods and the correlation analysis of rank order for CH4 yield showed strong between-period correlation coefficients, although this was weaker in the last period. It is suggested that feeding conditions that maximize feed intake (e.g. generous allowance of good quality pasture under grazing) favour the expression and persistence of between-sheep differences in CH4 yield
Spatial patterns in timing of the diurnal temperature cycle
This paper investigates the structural difference in timing of the diurnal temperature cycle (DTC) over land resulting from choice of measuring device or model framework. It is shown that the timing can be reliably estimated from temporally sparse observations acquired from a constellation of low Earth-orbiting satellites given record lengths of at least three months. Based on a year of data, the spatial patterns of mean DTC timing are compared between temperature estimates from microwave Ka-band, geostationary thermal infrared (TIR), and numerical weather prediction model output from the Global Modeling and Assimilation Office (GMAO). It is found that the spatial patterns can be explained by vegetation effects, sensing depth differences and more speculatively the orientation of orographic relief features. In absolute terms, the GMAO model puts the peak of the DTC on average at 12:50 local solar time, 23 min before TIR with a peak temperature at 13:13 (both averaged over Africa and Europe). Since TIR is the shallowest observation of the land surface, this small difference represents a structural error that possibly affects the model's ability to assimilate observations that are closely tied to the DTC. The equivalent average timing for Ka-band is 13:44, which is influenced by the effect of increased sensing depth in desert areas. For non-desert areas, the Ka-band observations lag the TIR observations by only 15 min, which is in agreement with their respective theoretical sensing depth. The results of this comparison provide insights into the structural differences between temperature measurements and models, and can be used as a first step to account for these differences in a coherent way
Recommended from our members
Languages and Learning at Key Stage 2: A Longitudinal Study Final Report
In 2006, The Open University, the University of Southampton and Canterbury Christ Church University were commissioned by the then Department for Education and Skills (DfES), now Department for Children, Schools and Families (DCSF) to conduct a three-year longitudinal study of languages learning at Key Stage 2 (KS2). The qualitative study was designed to explore provision, practice and developments over three school years between 2006/07 and 2008/09 in a sample of primary schools and explore children’s achievement in oracy and literacy, as well as the possible broader cross-curricular impact of languages learning
- …