Barbiturate and picrotoxin-sensitive chloride efflux in rat cerebral cortical synaptoneurosomes

AbstractThe effects of various barbiturates and picrotoxin in modifying the efflux of chloride (36Cl−) was studied in a novel subcellular preparation from rat cerebral cortex, the ‘synaptoneurosome’. Dilution of synaptoneurosomes pre-loaded with 36Cl− resulted in rapid efflux of 36Cl− that could be measured as early as 10 s following dilution. In the presence of barbiturates such as pentobarbital and hexobarbital there was a significant increase in 36Cl− efflux which was not observed with the pharmacologically-inactive barbiturate, barbital. The effect of barbiturates in enhancing 36Cl− efflux was also stereospecific [(−)-DMBB > (+)-DMBB] and reversed by picrotoxin. By contrast, picrotoxin alone significantly inhibited 36Cl− efflux. These data demonstrate pharmacologically relevant Cl− transport for the first time in a subcellular brain preparation

Frustrated pretransitional phenomena in aperiodic composites

Citation: Mariette, C., Frantsuzov, I., Wang, B., Guerin, L., Rabiller, P., Hollingsworth, M. D., & Toudic, B. (2016). Frustrated pretransitional phenomena in aperiodic composites. Physical Review B, 94(18), 9. doi:10.1103/PhysRevB.94.184105This paper reports on symmetry breaking in the aperiodic inclusion compound n-octadecane/urea and its isotopomer n-octadecane/urea-d(4). The high-symmetry phase is described by a hexagonal rank-4 superspace group. Pretransitional phenomena in this crystallographic superspace reveal competing short-range-ordering phenomena within the high-symmetry phase. Very high-resolution diffraction data show that critical scattering appears at inequivalent points within the four-dimensional Brillouin zone, although the first phase transition at T-c1 near 158 K implies the condensation at only one of those points. The resulting superspace group remains of dimension 4. Two other phase transitions are reported at T-c2 = 152.8(4) K and T-c3 = 109(4) K in n-octadecane/urea-d(4). The two low-symmetry phases that arise are described by rank-5 superspace groups

The creation of modulated monoclinic aperiodic composites in n-alkane/urea compounds

Citation: Mariette, C., Guerin, L., Rabiller, P., Chen, Y. S., Bosak, A., Popov, A., . . . Toudic, B. (2015). The creation of modulated monoclinic aperiodic composites in n-alkane/urea compounds. Zeitschrift Fur Kristallographie, 230(1), 5-11. doi:10.1515/zkri-2014-1773n-Dodecane/urea is a member of the prototype series of n-alkane/urea inclusion compounds. At room temperature, it presents a quasi-one dimensional liquid-like state for the confined guest molecules within the rigid, hexagonal framework of the urea host. At lower temperatures, we report the existence of two other phases. Below T-c=248 K there appears a phase with rank four superspace group P6(1)22(00 gamma), the one typically observed at room temperature in n-alkane/urea compounds with longer guest molecules. A misfit parameter, defined by the ratio gamma=C-h/C-g (C-host/C-guest), is found to be 0.632 +/- 0.005. Below T-c1=123 K, a monoclinic modulated phase is created with a constant shift along c of the guest molecules in adjacent channels. The maximal monoclinic space group for this structure is P12(1)1(alpha 0 gamma). Analogies and differences with n-heptane/urea, which also presents a monoclinic, modulated low-temperature phase, are discussed

Long-range modulation of a composite crystal in a five-dimensional superspace

Citation: Guerin, L., Mariette, C., Rabiller, P., Huard, M., Ravy, S., Fertey, P., . . . Toudic, B. (2015). Long-range modulation of a composite crystal in a five-dimensional superspace. Physical Review B, 91(18), 7. doi:10.1103/PhysRevB.91.184101The intergrowth crystal of n-tetracosane/urea presents a misfit parameter, defined by the ratio gamma = c(h)/c(g) (c(host)/c(guest)), that is very close to a commensurate value (gamma congruent to 1/3). High-resolution diffraction studies presented here reveal an aperiodic misfit parameter of gamma = 0.3369, which is found to be constant at all temperatures studied. A complex sequence of structural phases is reported. The high temperature phase (phase I) exists in the four-dimensional superspace group P6(1)22(00 gamma). At T-c1 = 179(1) K, a ferroelastic phase transition increases the dimension of the crystallographic superspace. This orthorhombic phase (phase II) is characterized by the five-dimensional (5D) superspace group C222(1)(00 gamma)(10 delta) with a modulation vector a(o)* + c(m)* = a(o)* + delta . c(h)*, in which the supplementary misfit parameter is delta = 0.025(1) in host reciprocal units. This corresponds to the appearance of a modulation of very long period (about 440 +/- 16 angstrom). At T-c2 = 163.0(5) K, a 5D to 5D phase transition leads to the crystallographic superspace group P2(1)2(1)2(1)(00 gamma)(00 delta) with a very similar value of delta. This phase transition reveals a significant hysteresis effect

Essential and checkpoint functions of budding yeast ATM and ATR during meiotic prophase are facilitated by differential phosphorylation of a meiotic adaptor protein, Hop1

A hallmark of the conserved ATM/ATR signalling is its ability to mediate a wide range of functions utilizing only a limited number of adaptors and effector kinases. During meiosis, Tel1 and Mec1, the budding yeast ATM and ATR, respectively, rely on a meiotic adaptor protein Hop1, a 53BP1/Rad9 functional analog, and its associated kinase Mek1, a CHK2/Rad53-paralog, to mediate multiple functions: control of the formation and repair of programmed meiotic DNA double strand breaks, enforcement of inter-homolog bias, regulation of meiotic progression, and implementation of checkpoint responses. Here, we present evidence that the multi-functionality of the Tel1/Mec1-to-Hop1/Mek1 signalling depends on stepwise activation of Mek1 that is mediated by Tel1/Mec1 phosphorylation of two specific residues within Hop1: phosphorylation at the threonine 318 (T318) ensures the transient basal level Mek1 activation required for viable spore formation during unperturbed meiosis. Phosphorylation at the serine 298 (S298) promotes stable Hop1-Mek1 interaction on chromosomes following the initial phospho-T318 mediated Mek1 recruitment. In the absence of Dmc1, the phospho-S298 also promotes Mek1 hyper-activation necessary for implementing meiotic checkpoint arrest. Taking these observations together, we propose that the Hop1 phospho-T318 and phospho-S298 constitute key components of the Tel1/Mec1- based meiotic recombination surveillance (MRS) network and facilitate effective coupling of meiotic recombination and progression during both unperturbed and challenged meiosis

Copper-doped CdSe/ZnS quantum dots : controllable photoactivated copper(I) cation storage and release vectors for catalysis

The first photoactivated doped quantum dot vector for metal-ion release has been developed. A facile method for doping copper(I) cations within ZnS quantum dot shells was achieved through the use of metal-dithiocarbamates, with Cu(+) ions elucidated by X-ray photoelectron spectroscopy. Photoexcitation of the quantum dots has been shown to release Cu(+) ions, which was employed as an effective catalyst for the Huisgen [3+2] cycloaddition reaction. The relationship between the extent of doping, catalytic activity, and the fluorescence quenching was also explored

The 72-Hour WEBT Microvariability Observation of Blazar S5 0716+714 in 2009

Context. The international whole earth blazar telescope (WEBT) consortium planned and carried out three days of intensive micro-variability observations of S5 0716+714 from February 22, 2009 to February 25, 2009. This object was chosen due to its bright apparent magnitude range, its high declination, and its very large duty cycle for micro-variations. Aims. We report here on the long continuous optical micro-variability light curve of 0716+714 obtained during the multi-site observing campaign during which the Blazar showed almost constant variability over a 0.5 magnitude range. The resulting light curve is presented here for the first time. Observations from participating observatories were corrected for instrumental differences and combined to construct the overall smoothed light curve. Methods. Thirty-six observatories in sixteen countries participated in this continuous monitoring program and twenty of them submitted data for compilation into a continuous light curve. The light curve was analyzed using several techniques including Fourier transform, Wavelet and noise analysis techniques. Those results led us to model the light curve by attributing the variations to a series of synchrotron pulses. Results. We have interpreted the observed microvariations in this extended light curve in terms of a new model consisting of individual stochastic pulses due to cells in a turbulent jet which are energized by a passing shock and cool by means of synchrotron emission. We obtained an excellent fit to the 72-hour light curve with the synchrotron pulse model

Hazardous materials management using a Cradle-to-Grave Tracking and Information System (CGTIS)

Hazardous materials management includes interactions among materials, personnel, facilities, hazards, and processes of various groups within a DOE site`s environmental, safety & health (ES&H) and line organizations. Although each group is charged with addressing a particular aspect of these properties and interactions, the information it requires must be gathered into a coherent set of common data for accurate and consistent hazardous material management and regulatory reporting. It is these common data requirements which the Cradle-to-Grave Tracking and Information System (CGTIS) is designed to satisfy. CGTIS collects information at the point at which a process begins or a material enters a facility, and maintains that information, for hazards management and regulatory reporting, throughout the entire life-cycle by providing direct on-line links to a site`s multitude of data bases to bring information together into one common data model

Hazardous materials management using a Cradle-to-Grave Tracking and Information System (CGTIS)

Hazardous materials management includes interactions among materials, personnel, facilities, hazards, and processes of various groups within a DOE site`s environmental, safety & health (ES&H) and line organizations. Although each group is charged with addressing a particular aspect of these properties and interactions, the information it requires must be gathered into a coherent set of common data for accurate and consistent hazardous material management and regulatory reporting. It is these common data requirements which the Cradle-to-Grave Tracking and Information System (CGTIS) is designed to satisfy. CGTIS collects information at the point at which a process begins or a material enters a facility, and maintains that information, for hazards management and regulatory reporting, throughout the entire life-cycle by providing direct on-line links to a site`s multitude of data bases to bring information together into one common data model