The shell mounds of the Farasan Islands - An isotopic study of seasonality and coastal exploitation

The focus of this thesis is to assess the value of the coastal landscape of the southern Red Sea after the aridification of the environment following the early Holocene wet period (11,000–6,000 cal BP). It presents data from the Farasan Islands shell midden complex, encompassing over 3,000 shellmounds accumulated between 6,500 and 4,500 cal BP, and indicating heavy reliance on marine molluscs as food. In the context of the overall aridity, there are crucial questions surrounding such intensive shellfish exploitation: a) were shellfish the main food source on the islands? b) were they a reliable food source and could they have supported a permanent settlement? c) was the exploitation of shellfish linked to the environmental change? Exploitation patterns of shellfish are reconstructed using seasonality data based on 2,100 stable isotope measurements (δ18O and δ13C) of the marine gastropod Conomurex* fasciatus* (Born 1778). This enables an assessment of the seasonal consumption of this species, and hence whether it could have been exploited all year round, or whether movement to the mainland (with its more temperate mountains) was necessary. Additionally, environmental data based on the same proxy is used to reconstruct climatic conditions. Early and late periods (6,500–4,800 cal BP) are compared to analyse the degree of aridity and the possibility of a longer2lasting early Holocene wet phase. Results indicate that year2round shellfish gathering took place, with more intensive exploitation occurring in the summer dry season, and that 6,500 years ago climate was already extremely dry. This suggests that the intensive coastal exploitation was not due to landscape aridification, it also indicates that seasonal migration to the mainland was not a necessity, as shellfish were available throughout the year. These results significantly extend the current understanding of subsistence strategies in the southern Red Sea and the value of shellmounds worldwide

Normal-state properties of the antiperovskite oxide Sr3−x_{3-x}SnO revealed by 119^{119}Sn-NMR

We have performed $^{119}$Sn-NMR measurements on the antiperovskite oxide superconductor Sr$_{3-x}$SnO to investigate how its normal state changes with the Sr deficiency. A two-peak structure was observed in the NMR spectra of all the measured samples. This suggests that the phase separation tends to occur between the nearly stoichiometric and heavily Sr-deficient Sr$_{3-x}$SnO phases. The measurement of the nuclear spin-lattice relaxation rate $1/T_1$ indicates that the Sr-deficient phase shows a conventional metallic behavior due to the heavy hole doping. In contrast, the nearly stoichiometric phase exhibits unusual temperature dependence of $1/T_1$, attributable to the presence of a Dirac-electron band.Comment: 5 pages, 4 figure

Stannites – a new promising class of durable electrocatalysts for efficient water oxidation

The oxygen evolution reaction (OER) through water oxidation is a key process for multiple energy storage technologies required for a sustainable energy economy such as the formation of the fuel hydrogen from water and electricity, or metal‐air batteries. Herein, we investigate the suitability of Cu2FeSnS4 for the OER and demonstrate its superiority over iron sulfide, iron (oxy)hydroxides and benchmark noble‐metal catalysts in alkaline media. Electrodeposited Cu2FeSnS4 yields the current densities of 10 and 1000 mA/cm2 at overpotentials of merely 228 and 330 mV, respectively. State‐of‐the‐art analytical methods are applied before and after electrocatalysis to uncover the fate of the Cu2FeSnS4 precatalyst under OER conditions and to deduce structure‐activity relationships. Cu2FeSnS4 is the first compound reported for OER among the broad class of stannite structure type materials containing multiple members with highly active earth‐abundant transition‐metals for OER.DFG, 390540038, EXC 2008: Cluster of Excellence UniSysCatTU Berlin, Open-Access-Mittel - 201

Oxygen Evolution Activity of Amorphous Cobalt Oxyhydroxides: Interconnecting Precatalyst Reconstruction, Long‐Range Order, Buffer‐Binding, Morphology, Mass Transport, and Operation Temperature

Nanocrystalline or amorphous cobalt oxyhydroxides (CoCat) are promising electrocatalysts for the oxygen evolution reaction (OER). While having the same short‐range order, CoCat phases possess different electrocatalytic properties. This phenomenon is not conclusively understood, as multiple interdependent parameters affect the OER activity simultaneously. Herein, a layered cobalt borophosphate precatalyst, Co(H2O)2[B2P2O8(OH)2]·H2O, is fully reconstructed into two different CoCat phases. In contrast to previous reports, this reconstruction is not initiated at the surface but at the electrode substrate to catalyst interface. Ex situ and in situ investigations of the two borophosphate derived CoCats, as well as the prominent CoPi and CoBi identify differences in the Tafel slope/range, buffer binding and content, long‐range order, number of accessible edge sites, redox activity, and morphology. Considering and interconnecting these aspects together with proton mass‐transport limitations, a comprehensive picture is provided explaining the different OER activities. The most decisive factors are the buffers used for reconstruction, the number of edge sites that are not inhibited by irreversibly bonded buffers, and the morphology. With this acquired knowledge, an optimized OER system is realized operating in near‐neutral potassium borate medium at 1.62 ± 0.03 VRHE yielding 250 mA cm−2 at 65 °C for 1 month without degrading performance

Boosting water oxidation through in situ electroconversion of manganese gallide: an intermetallic precursor approach

For the first time, the manganese gallide (MnGa4) served as an intermetallic precursor, which upon in situ electroconversion in alkaline media produced high‐performance and long‐term‐stable MnOx‐based electrocatalysts for water oxidation. Unexpectedly, its electrocorrosion (with the concomitant loss of Ga) leads simultaneously to three crystalline types of MnOx minerals with distinct structures and induced defects: birnessite δ‐MnO2, feitknechtite β‐MnOOH, and hausmannite α‐Mn3O4. The abundance and intrinsic stabilization of MnIII/MnIV active sites in the three MnOx phases explains the superior efficiency and durability of the system for electrocatalytic water oxidation. After electrophoretic deposition of the MnGa4 precursor on conductive nickel foam (NF), a low overpotential of 291 mV, comparable to that of precious‐metal‐based catalysts, could be achieved at a current density of 10 mA cm−2 with a durability of more than five days.DFG, 390540038, EXC 2008: UniSysCatTU Berlin, Open-Access-Mittel - 201

Nanostructured Intermetallic Nickel Silicide (Pre)Catalyst for Anodic Oxygen Evolution Reaction and Selective Dehydrogenation of Primary Amines

The development of novel earth-abundant metal-based catalysts to accelerate the sluggish oxygen evolution reaction (OER) is crucial for the process of large-scale production of green hydrogen. To solve this bottleneck, herein, a simple one-pot colloidal approach is reported to yield crystalline intermetallic nickel silicide (Ni2Si), which results in a promising precatalyst for anodic OER. Subsequently, an anodic-coupled electrosynthesis for the selective oxidation of organic amines (as sacrificial proton donating agents) to value-added organocyanides is established to boost the cathodic reaction. A partial transformation of the Ni2Si intermetallic precatalyst generates a porous nickel(oxy)hydroxide phase modified with oxidic silicon species as unequivocally demonstrated by a combination of quasi in situ Raman and X-ray absorption spectroscopy as well as ex situ methods. The activated form of the catalyst generates a geometric current density of 100 mA cm−2 at an overpotential (η100) of 348 mV displaying long-term durability over a week and high efficiency in paired electrolysis

Information dropout patterns in restriction site associated DNA phylogenomics and a comparison with multilocus Sanger data in a species-rich moth genus

A rapid shift from traditional Sanger sequencing-based molecular methods to the phylogenomic approach with large numbers of loci is underway. Among phylogenomic methods, restriction site associated DNA (RAD) sequencing approaches have gained much attention as they enable rapid generation of up to thousands of loci randomly scattered across the genome and are suitable for nonmodel species. RAD data sets however suffer from large amounts of missing data and rapid locus dropout along with decreasing relatedness among taxa. The relationship between locus dropout and the amount of phylogenetic information retained in the data has remained largely uninvestigated. Similarly, phylogenetic hypotheses based on RAD have rarely been compared with phylogenetic hypotheses based on multilocus Sanger sequencing, even less so using exactly the same species and specimens. We compared the Sanger-based phylogenetic hypothesis (8 loci; 6172 bp) of 32 species of the diverse moth genus Eupithecia (Lepidoptera, Geometridae) to that based on double-digest RAD sequencing (3256 loci; 726,658 bp). We observed that topologies were largely congruent, with some notable exceptions that we discuss. The locus dropout effect was strong. We demonstrate that number of loci is not a precise measure of phylogenetic information since the number of single-nucleotide polymorphisms (SNPs) may remain low at very shallow phylogenetic levels despite large numbers of loci. As we hypothesize, the number of SNPs and parsimony informative SNPs (PIS) is low at shallow phylogenetic levels, peaks at intermediate levels and, thereafter, declines again at the deepest levels as a result of decay of available loci. Similarly, we demonstrate with empirical data that the locus dropout affects the type of loci retained, the loci found in many species tending to show lower interspecific distances than those shared among fewer species. We also examine the effects of the numbers of loci, SNPs, and PIS on nodal bootstrap support, but could not demonstrate with our data our expectation of a positive correlation between them. We conclude that RAD methods provide a powerful tool for phylogenomics at an intermediate phylogenetic level as indicated by its broad congruence with an eight-gene Sanger data set in a genus of moths. When assessing the quality of the data for phylogenetic inference, the focus should be on the distribution and number of SNPs and PIS rather than on loci.Peer reviewe

Insect taxonomy can be difficult : a noctuid moth (Agaristinae: Aletopus imperialis) and a geometrid moth (Sterrhinae: Cartaletis dargei) combined into a cryptic species complex in eastern Africa (Lepidoptera)

The systematic position of a large and strikingly coloured reddish-black moth, Cartaletis dargei Herbulot, 2003 (Geometridae: Sterrhinae) from Tanzania, has remained questionable since its description. Here we present molecular and morphological evidence showing that Cartaletis dargei only superficially resembles true Cartaletis Warren, 1894 (the relative name currently considered a junior synonym of Aletis Hubner, 1820), which are unpalatable diurnal moths superficially resembling butterflies, and that it is misplaced in the family Geometridae. We transfer it to Noctuidae: Agaristinae, and combine it with the genus Aletopus Jordan, 1926, from Tanzania, as Aletopus dargei (Herbulot, 2003) (new combination). We revise the genus Aletopus to contain three species, but find that it is a cryptic species complex that needs to be revised with more extensive taxon sampling. Our results demonstrate the difficulties in interpreting and classifying biological diversity. We discuss the problems in species delimitation and the potential drivers of evolution in eastern Africa that led to phenotypic similarity in unrelated lepidopteran lineages.Peer reviewe

Understanding the formation of bulk- and surface-active layered (oxy)hydroxides for water oxidation starting from a cobalt selenite precursor

The urgent need for a stable, efficient, and affordable oxygen evolution reaction (OER) catalyst has led to the investigation of a vast amount of transition metal materials with multiple different anions.In situandpostcatalytic characterization shows that most materials transform during the harsh OER conditions to layered (oxy)hydroxides (LOH). Several open questions concerning thesein situformed LOH remain such as: an explanation for their strongly varying activities, or the effect of the precatalyst structure, leaching anions, and transformation conditions on the formed LOH. Herein, we report on a cobalt selenite precursor, which, depending on pH and potential, transforms irreversibly into two different LOH OER catalysts. Combining multiple electrochemical and analytical methodsexandin situ, we prove that one of these products is near-surface catalytically active and the other one throughout the bulk with anin situaverage cobalt oxidation state of 3.2. We deduce a detailed structural model explaining these differences and propose general concepts relating both the precatalyst structure and the transformation conditions to the final catalyst. Further, we apply these models to the most promising non-noble metal catalyst, NiFe LOH