Antimicrobial activity of silver-carbon nanoparticles on the bacterial flora of bull semen

The spermicidal effects of silver nanoparticles (AgNPs) hinder its application in the field of artificial insemination. In this study, silver-carbon NPs (Ag@C NPs) was synthesized and applied as an alternative antibiotic agent for bull semen extender. Ag@C NPs were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic absorption flame spectroscopy, transmission electron microscope (TEM), and high-resolution TEM (HR-TEM). Data analysis revealed the successful synthesis of Ag@C NPs with a particle size of 1–5 nm (average particle size of 2.5 nm) embedded into carbon. The antimicrobial activity of Ag@C NPs was tested against bacteriospermia of fresh semen collected from five fertile bulls (three ejaculates/bull). Escherichia coli (E. Coli), Staphylococcus aureus (S. aureus), and Pseudomonas aeruginosa (P. aeruginosa) were isolated from fresh semen samples and identified by culture, staining, and conventional biochemical tests. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of Ag@C NPs against bacteriospermia was determined at 5 and 37 °C. Ag@C NPs showed efficient antimicrobial activity (MIC: 3.125–12.5 μg/mL) against the tested strains and strong bactericidal effect on S. aureus, and P. aeruginosa (MBC: 3.125 μg/mL), with no detrimental effect (P ˃ 0.05) on the percentage of sperm motility (70.71 ± 4.82; 74.65 ± 4.46), plasma membrane integrity (68.39 ± 4.31; 72.38 ± 4.91), acrosome integrity (88.40 ± 13.21; 86.77 ± 14.23), and normal sperm morphology (86.85 ± 7.43; 87.82 ± 8.15) at concentrations of 15 and 30 μg/mL, respectively, after a cold storage of 48 h. However, Ag@C NPs showed a detrimental effect on sperm parameters in a dose dependent manner at concentrations ≥60 μg/mL. Ag@C NPs showed no adverse effect on the sperm’s ultrastructure with limited sperm internalization at MIC. In conclusion, Ag@C NPs could be used as an alternative antibiotic agent for bull semen extender without a significant cytotoxic effect on the sperm during cold storage. However, further investigations for their effects on embryo production and female genitalia are still required

Charged ultrafiltration membranes based on TEMPO-oxidized cellulose nanofibrils/poly(vinyl alcohol) antifouling coating

This study reports the potential of TEMPO-oxidized cellulose nanofibrils (T-CNF)/poly(vinyl alcohol) (PVA) coatings to develop functionalized membranes in the ultrafiltration regime with outstanding antifouling performance and dimensional/pH stability. PVA acts as an anchoring phase interacting with the polyethersulfone (PES) substrate and stabilizing for the hygroscopic T-CNF via crosslinking. The T-CNF/PVA coated PES membranes showed a nano-textured surface, a change in the surface charge, and improved mechanical properties compared to the original PES substrate. A low reduction (4%) in permeance was observed for the coated membranes, attributable to the nanometric coating thickness, surface charge, and hydrophilic nature of the coated layer. The coated membranes exhibited charge specific adsorption driven by electrostatic interaction combined with rejection due to size exclusion (MWCO 530 kDa that correspond to a size of ∼35–40 nm). Furthermore, a significant reduction in organic fouling and biofouling was found for T-CNF/PVA coated membranes when exposed to BSA and E. coli. The results demonstrate the potential of simple modifications using nanocellulose to manipulate the pore structure and surface chemistry of commercially available membranes without compromising on permeability and mechanical stability

Burnout among surgeons before and during the SARS-CoV-2 pandemic: an international survey

Background: SARS-CoV-2 pandemic has had many significant impacts within the surgical realm, and surgeons have been obligated to reconsider almost every aspect of daily clinical practice. Methods: This is a cross-sectional study reported in compliance with the CHERRIES guidelines and conducted through an online platform from June 14th to July 15th, 2020. The primary outcome was the burden of burnout during the pandemic indicated by the validated Shirom-Melamed Burnout Measure. Results: Nine hundred fifty-four surgeons completed the survey. The median length of practice was 10 years; 78.2% included were male with a median age of 37 years old, 39.5% were consultants, 68.9% were general surgeons, and 55.7% were affiliated with an academic institution. Overall, there was a significant increase in the mean burnout score during the pandemic; longer years of practice and older age were significantly associated with less burnout. There were significant reductions in the median number of outpatient visits, operated cases, on-call hours, emergency visits, and research work, so, 48.2% of respondents felt that the training resources were insufficient. The majority (81.3%) of respondents reported that their hospitals were included in the management of COVID-19, 66.5% felt their roles had been minimized; 41% were asked to assist in non-surgical medical practices, and 37.6% of respondents were included in COVID-19 management. Conclusions: There was a significant burnout among trainees. Almost all aspects of clinical and research activities were affected with a significant reduction in the volume of research, outpatient clinic visits, surgical procedures, on-call hours, and emergency cases hindering the training. Trial registration: The study was registered on clicaltrials.gov "NCT04433286" on 16/06/2020

Biodegradable Polymer Nanocomposites

Biodegradable Polymers Nanocomposites Revie

Lanthanide Metal-Organic Frameworks and Hierarchical Porous Zeolitic Imidazolate Frameworks : Synthesis, Properties, and Applications

This thesis presents the synthesis, properties, and applications of two important classes of metal-organic frameworks (MOFs); lanthanide MOFs and hierarchical porous zeolitic imidazolate frameworks (ZIFs). The materials have been characterized using a wide range of techniques including diffraction, imaging, various spectroscopic techniques, gas sorption, dynamical light scattering (DLS) and thermogravimetric analysis (TGA). In Chapter 1, the unique features of MOFs and ZIFs as well as their potential applications are summarized. In Chapter 2, different characterization techniques are presented. Chapter 3 describes a family of new isoreticular lanthanide MOFs synthesized using tri-topic linkers of different sizes, H3L1-H3L4, denoted SUMOF-7I-IV (Ln) (SU; Stockholm University, Ln = La, Ce, Pr, Nd, Sm, Eu and Gd, Paper I). The SUMOF-7I-III (Ln) contain permanent pores and exhibit exceptionally high thermal and chemical stability. The luminescence properties of SUMOF-7IIs are reported (Paper II). The influences of Ln ions and the tri-topic linkers as well as solvent molecules on the luminescence properties are investigated. Furthermore, the potential of SUMOF-7II (La) for selective sensing of Fe (III) ions and the amino acid tryptophan is demonstrated (Paper III).  Chapter 4 presents a simple, fast and scalable approach for the synthesis of hierarchical porous zeolitic imidazolate framework ZIF-8 and ZIF-67 using triethylamine (TEA)-assisted approach (Paper IV). Organic dye molecules and proteins are encapsulated directly into the ZIFs using the one-pot method. The photophysical properties of the dyes are improved through the encapsulation into ZIF-8 nanoparticles (Paper IV). The porosity and surface area of the ZIF materials can be tuned using the different amounts of dye or TEA. To further simplify the synthesis of hierarchical porous ZIF-8, a template-free approach is presented using sodium hydroxide, which at low concentrations induces the formation of zinc hydroxide nitrate nanosheets that serve as in situ sacrificial templates (Chapter 5, Paper V). A 2D leaf-like ZIF (ZIF-L) is also obtained using the method. The hierarchical porous ZIF-8 and ZIF-L show good performance for CO2 sorption.At the time of the doctoral defense, the following papers were unpublished and had a status as follows: Paper 2: Manuscript. Paper 5: Manuscript.</p

Biodegradable Polymer Nanocomposites: A Review of Properties

Biodegradable polymers exhibit shortcomings, including low thermal stability and electrical conductivity. These challenges limit the broad applications of several applications, such as electronic devices. They show suitable dielectric, thermal, and electrical conductivity compared to the biodegradable polymer alone. Several methods can improve biodegradable polymers\u27 dielectric, thermal, and electric conductivity, including co-polymerization, blending, and cross-linking with other polymers. Furthermore, the formation of nanocomposites seems to be the most effective method to improve the properties and performance of biodegradable polymers. This book chapter summarized biodegradable polymers\u27 dielectric, thermal, and electrical conductivity. Biodegradable polymers nanocomposites consisting of polymers blend, inorganic, and other nanomaterials were discussed

Advanced Multifunctional Materials (2023)

This review summarizes mainly the activity of our labs. We established more than one laboratory for materials synthesis, characterization, and applications. Our laboratories provide the synthesis of several nanoparticles including metal oxide nanoparticles (e.g., Fe3O4, ZnO, ZrOSO4, MoO3-x, CuO, AgFeO2, Co3O4, SiO2, and CuFeO2), metallic nanoparticles (Ag, Au, Pd, and Pt), carbon-based nanomaterials (graphene, graphene oxide, reduced graphene oxide, and carbon dots (CDs)), biopolymers (cellulose, nanocellulose, TOCNF, alginate, and chitosan), organic polymers (conjugated polymers, covalent-organic frameworks (COFs), and intrinsic microporous polymers), and hybrid materials e.g. metal-organic frameworks (MOFs). These materials were applied for energy, environmental, and biomedicine applications. They were applied in several fields such as environmental-based technologies (e.g., water remediation, air purification, gas storage), energy (production of hydrogen, dimethyl ether, solar cells, and supercapacitors), and biomedical sectors (sensing/biosensing, cancer therapy, and drug delivery). They can act as efficient adsorbents and catalysts to remove emerging contaminants such as metals, dyes, drugs, antibiotics, pesticides, and oils in water via adsorption. They can be also used as catalysts for catalytic degradation, reduction, and oxidation of organic pollutants. They can be used as filters for air purification by removing greenhouse gases such as carbon dioxide (CO2), volatile organic compounds (VOCs), and particulate matter (PMs). They can be used for hydrogen production via water splitting, alcohol oxidation, and hydrolysis of NaBH4. Biomedical applications such as antibacterial, drug delivery, and biosensing were also involved