459 research outputs found
Productivity of date palm as affected by irrigation in a sandy soil
A field experiment was conducted on drip irrigated date palm trees (Barhi var.) in a private farm during the 2020 and 2021 seasons to evaluate the effect of five irrigation treatments (120, 100, 80, and 60% ETo and farmer practice) on amounts of applied irrigation water (AIW), consumptive use (CU), date yield and its components, fruit quality, water use efficiency (WUE), water productivity (WP), consumed electric energy, net income, a local date crop coefficient (Kc) and yield response factor (Ky). Results revealed that, average ETo values varied between 1.26 mm/day in December and 9.85 mm/day in July. The 2–year average AIW values were 17 377, 14 546, 11 715, 8 885 and 24 680 m3/ha for the 120, 100, 80 and 60% ETo treatments and farmer practice, respectively. Highest and lowest fruit yields of 39.2 and 15.2 t/ha were recorded for the 120% and 60% ETo treatments, respectively. The WP values of the same treatments were 2.27 and 1.23 kg fruits/m3. Seasonal average Kc value of 0.74 is obtained for the 120% ETo treatment. The Ky value of 1.187 is obtained for the Barhi variety. The lowest consumed energy (64.7%) and highest net income (31.8%) were recorded for 60% and 120% ETo treatments compared with farmer practice.
Keywords: Applied water, water consumption, water use efficiency, water productivity, crop coefficient, yield response factor, energy saving, net incom
Reconfiguration technique for Optimization of the Photovoltaic array output power under partial shading conditions
A partial shading condition is a case under which the PV array is exposed to many problems such as losses of the output power of the PV array, and the PV array has more than one maximum power point (MPP), which makes it so difficult to track the MPP. This paper presents the effect of different partial shading patterns on PV array characteristics and the effect on the output power of the PV array, and provides a comparative literature review on methods to mitigate these effects and the drawbacks of these methods. It also proposed a new reconfiguration strategy that increases the output power of the PV array by 13.8 % from the total power under shadow condition, and a new technique for enhancing the output power of the PV array by 20 % of the total power under fully illumining conditions by controlling the switch matrix between the photovoltaic array and adaptive batteries bank. This paper gives a solution for the problem of the difficulty of tracking the MPP, because the proposed strategy makes only one MPP. The simulation was carried out by using MATLAB Simulink under different shading patterns.Citation: Mohamed, A. M., Saafan, S. M., Attalla, A. M., and Elgohary, H. (2018). Reconfiguration technique for Optimization of the Photovoltaic array output power under partial shading conditions. Trends in Renewable Energy, 4, 111-124. DOI: 10.17737/tre.2018.4.2.006
Evolution of second trimester low implanted placenta to previa at term: a prospective cohort study
Background: The objective of this study is to identify the percentage of low implanted placenta (LIP) at second trimester of pregnancy and identify the risk factors of its persistence to placenta previa (PP) at term.Methods: Through a registered prospective cohort study conducted at tertiary hospital in Upper Egypt, authors screened all pregnant ladies comes to present facility for antenatal second trimester USG between 18-24 weeks gestation. All participants interviewed for detailed risk factors of placenta previa. Those diagnosed to have a LIP (≤1.5 cm from the internal os) had had TVS to confirm the exact distance between the lower edge of the placenta and the internal os. Serial USG had been done every 4 weeks up to delivery to measure the same distance. The primary outcome was the percentage of LIP at 18-24 weeks. Logistic regression analysis was performed to predict the risk factors for PP at term.Results: Through screening of 1000 pregnant lady, LIP had been identified in (52 cases) 5.2% of pregnant women between 18-24 weeks. This percentage dropped gradually to reach 1.3% at 36 weeks of gestation and at time of delivery. The logistic regression analysis demonstrated that the distance between the internal os and the lower edge of the placenta between 18-24 weeks was the single significant variable associated with PP at term (p<0.001, odds ratio 0.319, 95% CI 0.20-0.50). However, excluding the distance from the regression model demonstrated other risk factors as previous miscarriage, previous cesarean section (CS), and history of multiple pregnancies and history of previous PP.Conclusions: About 5.0% of pregnant women have LIP at the second trimester of pregnancy (18-24 weeks) and only 25.0 % of them remain placenta previa at term. A cut-off value of 10 mm between the internal os and the lower edge of the placenta is the most important predictor of development of PP
STR-827: SHEAR STRENGTH OF CIRCULAR CONCRETE BEAMS REINFORCED WITH GFRP BARS
This paper presents the results of an investigation of the shear strength and behavior of three circular concrete beams reinforced with glass-FRP (GFRP) bars and spirals. The beams, which measured 3,000 mm in length by 500 mm in diameter, were tested under four-point bending. The test parameters included the GFRP-spiral-reinforcement ratio (different spiral spacings [150 and 200 mm] and spiral diameters [13 and 15 mm]). As designed, the beams failed in shear due to GFRP-spiral rupture. The test results indicated that the higher the GFRP spiral reinforcement ratio, the higher the enhancement of the shear strength due to the confinement, which controls shear cracks and improves aggregate interlocking
Commercial wind turbines modeling using single and composite cumulative probability density functions
As wind turbines more widely used with newer manufactured types and larger electrical power scales, a brief mathematical modelling for these wind turbines operating power curves is needed for optimal site matching selections. In this paper, 24 commercial wind turbines with different ratings and different manufactures are modelled using single cumulative probability density functions modelling equations. A new mean of a composite cumulative probability density function is used for better modelling accuracy. Invasive weed optimization algorithm is used to estimate different models designing parameters. The best cumulative density function model for each wind turbine is reached through comparing the RMSE of each model. Results showed that Weibull-Gamma composite is the best modelling technique for 37.5% of the reached results
SCREENING STUDY FOR FORMULATION VARIABLES IN PREPARATION AND CHARACTERIZATION OF CANDESARTAN CILEXETIL LOADED NANOSTRUCTURED LIPID CARRIERS
Objective: The current study inspects the screening of the formulation components further, evaluates the physicochemical properties of the nanostructured lipid carriers (NLCs) for the antihypertensive drug as Candesartan Cilexetil (CC). The sequence screening of all excipients required for the preparation of NLCs should be performed.
Methods: The prepared formulations were investigated for the different quality issues. The screening studies were performed to select the appropriate one of solid lipid, liquid lipid and surfactant. Also, investigation of physical compatibilities of solid lipid with liquid lipid and the ratios of them were evaluated. Furthermore, the physical characterization and quality issues of developed formulations were described and determined. Firstly, the solubility of CC in different solid and liquid lipids is the major parameter for the selection of the best one.
Results: Precirol® ATO 5, Compritol ® 888 ATO and Glyceryl Monostearate (GMS) were showed the maximum solubility of the CC (1000±4.12 mg, 1500±4.15 mg and 1750±3.16 mg), respectively. Hence, they were selected as the solid lipids for the development of NLCs. Liquid lipids Transcutol® HP (30±2.21 mg/ml), Labrasol® ALF (25±1.32 mg/ml) and CapryolTM 90 (18±1.34 mg/ml) were observed to have good affinity for the drug on systematic screening of different liquid lipids. All designed formulations observed in nanometer size of particles ranged from (408.9±11.5 to 114.6±8.3 nm) with high encapsulation efficiency around 99%.Also, the obtained results revealed that the ZP of the various formulations was consistently negative surface charge in between ((-13±2.3 to27.3±3.7 mV).
Conclusion: Finally, formula number nine of CC (CC-NLC9) which composed of GMS (solid lipid), CapryolTM 90 (liquid lipid) and Lutrol® F127: Cremophore® RH (surfactants combination) was selected as the best formulation after the rank order for further investigations in the next work. The current work clarifies a sequence steps for selection of excipients for NLCs by employing simple experiments.
Peer Review History:
Received 20 December 2019; Revised 5 January; Accepted 11 January, Available online 15 January 2020
Academic Editor: Ahmad Najib, Universitas Muslim Indonesia, Indonesia, [email protected]
UJPR follows the most transparent and toughest ‘Advanced OPEN peer review’ system. The identity of the authors and, reviewers will be known to each other. This transparent process will help to eradicate any possible malicious/purposeful interference by any person (publishing staff, reviewer, editor, author, etc) during peer review. As a result of this unique system, all reviewers will get their due recognition and respect, once their names are published in the papers. We expect that, by publishing peer review reports with published papers, will be helpful to many authors for drafting their article according to the specifications. Auhors will remove any error of their article and they will improve their article(s) according to the previous reports displayed with published article(s). The main purpose of it is ‘to improve the quality of a candidate manuscript’. Our reviewers check the ‘strength and weakness of a manuscript honestly’. There will increase in the perfection, and transparency.
Received file: Reviewer's Comments:
Average Peer review marks at initial stage: 5.0/10
Average Peer review marks at publication stage: 7.5/10
Reviewer(s) detail:
Dr. Mohammed Abdel-Wahab Sayed Abourehab, Umm Al-Qura University; Makkah Al-Mukarramah, Saudi Arabia, [email protected]
Dr. Maha Khalifa Ahmed Khalifa, Al-Azhar Universit - Cairo, Egypt, [email protected]
Dr. Evren AlÄŸin Yapar, Turkish Medicines and Medical Devices Agency, Turkiye, [email protected]
Similar Articles:
FORMULATION AND CHARACTERIZATION OF TOPICAL NANO EMULGEL OF TERBINAFINE
A REVIEW ON GOLD NANOPRTICLES SYNTHESIS AND CHARACTERIZATION
FORMULATION AND EVALUATION OF ELASTIC LIPOSOMES OF DECITABINE PREPARED BY ROTARY EVAPORATION METHO
Task Scheduling Optimization in Cloud Computing by Jaya Algorithm
Cloud computing provides resources to its consumers as a service. The cloud computing paradigm offers dynamic services by providing virtualized resources via the internet for enabling applications, and these services are provided by large-scale data centers known as clouds. Cloud computing is entirely reliant on the internet to provide its services to consumers. Cloud computing offers several advantages, including the fact that users only pay for what they use weekly, monthly, or yearly, that anybody with an internet connection may use the cloud, and that there is no need to purchase resources, hardware, or software on their own. This paper proposes an efficient task scheduling algorithm based on the Jaya algorithm for the cloud computing environment. We evaluate the performance of our method by applying it to three instances. The recommended technique produced the optimal solution in makespan, speedup, efficiency, and throughput, according to the findings
Shear Performance of GFRP Reinforced Concrete Beams with Seawater and Chopped Fiber
This paper reports an experimental study on the behavior and shear strength of concrete beams reinforced with longitudinal GFRP bars mixed with sea water. In order to evaluate how much concrete contributes to shear resistance, seven beams were tested in bending. Similar in size and concrete strength, the beams were longitudinally reinforced with glass fiber-reinforced polymer bars; however, they did not even have shear reinforcement. The beams, which measured 3,100 mm in length, 400 mm in depth, and 200 mm in width, were conducted and tested up to failure. The test variables were longitudinal reinforcement ratios (1.0, 1.4, and 2.0%), chopped fiber content (0, 0.5, 2, and 3 kg/m3), and mixing water type (freshwater and seawater). The test findings showed that increasing the reinforcement ratio increased the neutral-axis depth and allowed the formation of more closely spaced fractures while decreasing the loss of flexural stiffness after cracking. By increasing the area of concrete in compression, this in turn enhances the contribution of aggregate interlock as well as the contribution of uncracked concrete. Furthermore, increasing the reinforcement ratio improves the dowel action, which reduces the tensile stresses that are created in the concrete around it. Doi: 10.28991/CEJ-2023-09-04-05 Full Text: PD
An Efficient Firefly Algorithm for Optimizing Task Scheduling in Cloud Computing Systems
As user service demands change constantly, task scheduling becomes an extremely significant study area within the cloud environment. The goal of scheduling is distributing the tasks on available processors in order to achieve the shortest possible makespan while adhering to priority constraints. In heterogeneous cloud computing resources, task scheduling has a large influence on system performances. The various processes in the heuristic-based algorithm of scheduling will result in varied makespans when heterogeneous resources are utilized. As a result, a smart method of scheduling must be capable of establishing precedence efficacy for each task to decrease makespan time. In our study, we develop a novel efficient method of scheduling tasks according to the firefly algorithm to tackle an essential task and schedule a heterogeneous cloud computing problem. We evaluate the performance of our algorithm by putting it through three situations with changing amounts of processors and numbers of tasks. The findings of the experiment reveal that our suggested technique found optimal solutions substantially more frequently in terms of makespan time when compared with other methods
- …