The Study on RFID Security Method for Entrance Guard System

The RFID technology has been used by industries in recent years, for examples, replacing the traditional two-dimensional barcode, logistics management, military applications, identification. In fact, RFID technology has become one of the new killer technologies. The RFID uses radio frequency to convey information which involves, however, many security problems; Current RFID guidelines do not present solutions to these security problems. The methods put forward in published paper fail to offer complete solutions, either. This study identifies RFID security method for Entrance Guard system. The algorithms used include Hash, AES, random values, XOR four item technology, and use the three-way authentication structure to solve the safety problems of the certification of Entrance Guard system. The experiment showed the algorithms provided better protection on the current RFID systems against attack methods such as Eavesdropping, Traceability, Spoofing and Replay attacking

Noise reduction of plenum windows on the façade of a high-rise residential building next to heavy road traffic

Extensive traffic noise transmission loss measurements were carried out inside selected residential units of a standalone 32-storey housing block located next to a very busy and noisy main trunk road in the present study. A total of 35 units, which were all equipped with plenum windows, was surveyed. These plenum windows are intended to help reduce noise exposure of the residents and at the same time allow for a reasonable level of natural ventilation. The results show that the traffic noise transmission losses of the unit façades installed with the plenum windows adopted in this housing block vary between 10.6 and 13.0 dBA and are only weakly dependent on elevation from the trunk road. The results also validate in-situ the prediction model established previously by the authors using laboratory and site mockup data. Generalized models for both empirical and experimental estimation of the traffic noise transmission loss across a residential flat unit façade installed with multiple plenum windows are developed. The differences between their estimations are well within engineering tolerance

Limb Idleness Index (LII): a novel measurement of pain in a rat model of osteoarthritis

SummaryObjectivesMechanical allodynia during ambulation in osteoarthritis (OA) animal models can be assessed as decreased extent of loading or decreased duration of loading. We propose to measure gait adaptation to pain by both mechanisms with the development of Limb Idleness Index (LII) in a rat model of knee OA.MethodsRats were assigned to anterior cruciate ligament transection (ACLT), Sham, or Normal group (n = 6). Gait data were collected at pre-injury, 1, 2, 3 and 6 months post-injury. Ratios of target print intensity, anchor print intensity, and swing duration were combined to obtain LII. The association of gait changes with pain was assessed by buprenorphine treatment at 3 and 6 months post-injury. At 6 months, OA-related structural changes in knee joints were examined by μCT and results from histological scoring were correlated with LII.ResultsAs compared to pre-injury level (range 0.75–1.20), LII in ACLT group was increased at 6 months post-injury, which was significantly higher than that in Sham and Normal groups (P = 0.024). The increase in LII in ACLT group was effectively reversed by buprenorphine treatment (P = 0.004). ACLT group exhibited a significantly higher maximum Osteoarthritis Research Society International (OARSI) score as compared to Sham (P = 0.005) and Normal (P = 0.006) groups. Significant correlation was found between LII and side-to-side difference in OARSI score (r = 0.893, P < 0.001).ConclusionsLII presents a good measurement for OA-related knee pain in rat model

Increased gene expression of a facilitated diffusion urea transporter in the skin of the African lungfish (Protopterus annectens) during massively elevated post-terrestrialization urea excretion

The full-length cDNA sequence of a putative urea transporter (IfUl) of the facilitated diffusion UT-A type has been cloned from the African lungfish Protopterus annectens. The IFUTcDNA is 1990bp in length and its open reading frame encodes a 409 amino acid long protein, with a calculated molecular mass of 44,723 Da. The sequence is closest to those of amphibians (∼65% amino acid homology), followed by mammals and elasmobranchs (∼60%), and then teleosts (∼50%). IfUT was clearly expressed in gill, kidney, liver, skeletal muscle and skin. Upon re-immersion in water after 33days of air exposure (\u27terrestrialization\u27), lungfish exhibited a massive rise in urea-N excretion which peaked at 12-30h with rates of 2000-5000μmol-N kg-1 h -1 (versus normal aquatic rates of \u3c130μmol-Nkg -1h-1) and persisted until 70h. This appears to occur mainly through the skin. Total \u27excess\u27 urea-N excretion amounted to ∼81,000-91,000 μmol-N kg-1 over 3 days. By real-time PCR, there was no difference in IfUT expression in the ventral abdominal skin between aquatic ammoniotelic controls and terrestrialized lungfish immediately after return to water (0h), and no elevation of urea-N excretion at this time. However, skin biopsies revealed a significant 2.55-fold elevation of IfUT expression at 14h, coincident with peak urea-N excretion. At 48h, there was no longer any significant difference in IFUT mRNA levels from those at 0 and 14h, or from aquatic fed controls. In accordance with earlier studies, which identified elevated urea-N excretion w\u27athe skin of P. dolloi with pharmacology typical of UT-A carriers, these results argue that transcriptional activation of a facilitated diffusion type urea transporter (IfUT) occurs in the skin during re-immersion. This serves to clear the body burden of urea-N accumulated during terrestrialization

Potential of Electrolyzed Water as an Alternative Disinfectant Agent in the Fresh-Cut Industry

Water disinfection is one of the most critical processing steps in fresh-cut vegetable production. Technologies capable for the efficient disinfection of process water and recycled water would allow reducing wastewater and have less impact on the environment. Among the chemical disinfectants, hypochlorite solutions are still the most widely used. Electrochemical disinfection of the wash water has been demonstrated to be effective in eliminating a wide spectrum of pathogens in process water. Both hypochlorite solutions and electrochemically produced chlorine compounds, in particular hypochlorous acid, are effective disinfectants when adequate doses are used. A new electrochemical process using borondoped diamond electrodes can generate additional reactive oxidant species than chlorine and further enhance the disinfecting capacity. However, there are pros and cons on the use of one or other disinfectant agents. In this review, the technological advantages and the limitations of electrolyzed water, particularly regarding the organic matter content, are discussed and compared to the use of hypochlorite.Ciencias de la Alimentació

Study of self-alignment of μBGA packages

In this paper, a detailed study of the self-alignment of BGA packages is presented. Complete self-alignment can be achieved even for a misalignment of the package of larger than 50% off the test board pad centres. A small residual displacement of the package from perfect alignment after reflow is observed. The reason for this displacement is the action of gas flow viscous drag on the package during reflow. The use of eutectic SnPb solder paste slightly reduces self-aligning ability, due to the increase in the solder volume, which reduces the restoring force. Exposure of the solder paste to a 25 C and 85% RH humidity environment also has a detrimental effect on the self-alignment of the BGA package, due to solvent evaporation and moisture absorption in the paste causing solderability degradation. The self-alignment of the package is also affected when there is slow spreading of molten solder on the pad surface. This is attributed to the reduction of restoring force due to the decrease in effective wetting surface area of the board pad

The combined role of MRI prostate and prostate health index in improving detection of significant prostate cancer in a screening population of Chinese men

Using prostate-specific antigen (PSA) for prostate cancer (PCa) screening led to overinvestigation and overdiagnosis of indolent PCa. We aimed to investigate the value of prostate health index (PHI) and magnetic resonance imaging (MRI) prostate in an Asian PCa screening program. Men aged 50-75 years were prospectively recruited from a community-based PSA screening program. Men with PSA 4.0-10.0 ng ml -1 had PHI result analyzed. MRI prostate was offered to men with PSA 4.0-50.0 ng ml -1. A systematic prostate biopsy was offered to men with PSA 4.0-9.9 ng ml -1 and PHI ≥35, or PSA 10.0-50.0 ng ml -1. Additional targeted prostate biopsy was offered if they had PI-RADS score ≥3. Clinically significant PCa (csPCa) was defined as the International Society of Urological Pathology (ISUP) grade group (GG) ≥2 or ISUP GG 1 with involvement of ≥30% of total systematic cores. In total, 12.8% (196/1536) men had PSA ≥4.0 ng ml -1. Among 194 men with PSA 4.0-50.0 ng ml -1, 187 (96.4%) received MRI prostate. Among them, 28.3% (53/187) had PI-RADS ≥3 lesions. Moreover, 7.0% (107/1536) men were indicated for biopsy and 94.4% (101/107) men received biopsy. Among the men received biopsy, PCa, ISUP GG ≥2 PCa, and csPCa was diagnosed in 42 (41.6%), 24 (23.8%), and 34 (33.7%) men, respectively. Compared with PSA/PHI pathway in men with PSA 4.0-50.0 ng ml -1, additional MRI increased diagnoses of PCa, ISUP GG ≥2 PCa, and csPCa by 21.2% (from 33 to 40), 22.2% (from 18 to 22), and 18.5% (from 27 to 32), respectively. The benefit of additional MRI was only observed in PSA 4.0-10.0 ng ml -1, and the number of MRI needed to diagnose one additional ISUP GG ≥2 PCa was 20 in PHI ≥35 and 94 in PHI &lt;35. Among them, 45.4% (89/196) men with PSA ≥4.0 ng ml -1 avoided unnecessary biopsy with the use of PHI and MRI. A screening algorithm with PSA, PHI, and MRI could effectively diagnose csPCa while reducing unnecessary biopsies. The benefit of MRI prostate was mainly observed in PSA 4.0-9.9 ng ml -1 and PHI ≥35 group. PHI was an important risk stratification step for PCa screening.</p

Detection of SARS Coronavirus in Patients with Suspected SARS

Cases of severe acute respiratory syndrome (SARS) were investigated for SARS coronavirus (SARS-CoV) through RNA tests, serologic response, and viral culture. Of 537 specimens from patients in whom SARS was clinically diagnosed, 332 (60%) had SARS-CoV RNA in one or more clinical specimens, compared with 1 (0.3%) of 332 samples from controls. Of 417 patients with clinical SARS from whom paired serum samples were available, 92% had an antibody response. Rates of viral RNA positivity increased progressively and peaked at day 11 after onset of illness. Although viral RNA remained detectable in respiratory secretions and stool and urine specimens for >30 days in some patients, virus could not be cultured after week 3 of illness. Nasopharyngeal aspirates, throat swabs, or sputum samples were the most useful clinical specimens in the first 5 days of illness, but later in the illness viral RNA could be detected more readily in stool specimens

Synchronous communication in PLM environments using annotated CAD models

The connection of resources, data, and knowledge through communication technology plays a vital role in current collaborative design methodologies and Product Lifecycle Management (PLM) systems, as these elements act as channels for information and meaning. Despite significant advances in the area of PLM, most communication tools are used as separate services that are disconnected from existing development environments. Consequently, during a communication session, the specific elements being discussed are usually not linked to the context of the discussion, which may result in important information getting lost or becoming difficult to access. In this paper, we present a method to add synchronous communication functionality to a PLM system based on annotated information embedded in the CAD model. This approach provides users a communication channel that is built directly into the CAD interface and is valuable when individuals need to be contacted regarding the annotated aspects of a CAD model. We present the architecture of a new system and its integration with existing PLM systems, and describe the implementation details of an annotation-based video conferencing module for a commercial CAD application.This work was supported by the Spanish Ministry of Economy and Competitiveness and the FEDER Funds, through the ANNOTA project (Ref. TIN2013-46036-C3-1-R).Camba, JD.; Contero, M.; Salvador Herranz, GM.; Plumed, R. (2016). Synchronous communication in PLM environments using annotated CAD models. Journal of Systems Science and Systems Engineering. 25(2):142-158. https://doi.org/10.1007/s11518-016-5305-5S142158252Abrahamson, S., Wallace, D., Senin, N. & Sferro, P. (2000). Integrated design in a service marketplace. Computer-Aided Design, 32(2):97–107.Ahmed, S. (2005). Encouraging reuse of design knowledge: a method to index knowledge. Design Studies, 26:565–592.Alavi, M. & Tiwana, A (2002). Knowledge integration in virtual teams: the potential role of KMS. Journal of the American Society for Information Science and Technology, 53:1029–1037.Ameri, F. & Dutta, D. (2005). Product lifecycle management: closing the knowledge loops. Computer-Aided Design and Applications, 2(5):577–590.Anderson, A.H., Smallwood, L., MacDonald, R., Mullin, J., Fleming, A. & O'Malley, C. (2000). Video data and video links in mediated communication: what do users value? International Journal of Human-Computer Studies, 52(1):165–187.Arias, E., Eden, H., Fischer, G., Gorman, A. & Scharff, E. (2000). Transcending the individual human mind–creating shared understanding through collaborative design. ACM Transactions on Computer-Human Interaction (TOCHI) 7(1): 84–113.Barley, W.C., Leonardi, P.M., & Bailey, D.E. (2012). Engineering objects for collaboration: strategies of ambiguity and clarity at knowledge boundaries. Human Communication Research, 38:280–308.Boujut, J.F. & Dugdale, J. (2006). Design of a 3D annotation tool for supporting evaluation activities in engineering design. Cooperative Systems Design, COOP 6:1–8.Camba, J., Contero, M., Johnson, M. & Company, P. (2014). Extended 3D annotations as a new mechanism to explicitly communicate geometric design intent and increase CAD model reusability. Computer-Aided Design, 57:61–73.Camba, J., Contero, M. & Salvador-Herranz, G. (2014). Speak with the annotator: promoting interaction in a knowledge-based CAD environment built on the extended annotation concept. Proceedings of the 2014 IEEE 18th International Conference on Computer Supported Cooperative Work in Design (CSCWD), 196–201.Chudoba, K.M., Wynn, E., Lu, M. & Watson-Manheim, M.B. (2005). How virtual are we? Measuring virtuality and understanding its impact in a global organization. Information Systems Journal, 15(4):279–306.Danesi, F., Gardan, N. & Gardan, Y. (2006). Collaborative Design: from Concept to Application. Geometric Modeling and Imaging—New Trends, 90–96.Durstewitz, M., Kiefner, B., Kueke, R., Putkonen, H., Repo, P. & Tuikka, T. (2002). Virtual collaboration environment for aircraft design. Proceedings of the IEEE 6th International Conference on Information Visualisation, 502–507.Fisher, D., Brush, A.J., Gleave, E. & Smith, M.A. (2006). Revisiting Whittaker and Sidner’s email overload ten years later. Proceedings of the 2006 20th Anniversary Conference on Computer Supported Cooperative Work. ACM, BanffFonseca, M.J., Henriques, E., Silva, N., Cardoso, T. & Jorge, J.A. (2006). A collaborative CAD conference tool to support mobile engineering. Rapid Product Development (RPD’06), Marinha Grande, Portugal.Frechette, S.P. (2011). Model based enterprise for manufacturing. Proceedings of the 44th CIRP International Conference on Manufacturing Systems.Fu, W.X., Bian, J. & Xu, Y.M. (2013). A video conferencing system for collaborative engineering design. Applied Mechanics and Materials, 344:246–252.Fuh, J.Y.H. & Li, W.D. (2005). Advances in collaborative CAD: the-state-of-the art. Computer-Aided Design, 37:571–581.Fussell, S.R., Kraut, R.E. & Siegel, J. (2000). Coordination of communication: effects of shared visual context on collaborative work. Proceedings of the 2000 ACM Conference on Computer Supported Cooperative Work, 21–30.Gajewska, H., Kistler, J., Manasse, M.S. & Redell, D. (1994). Argo: a system for distributed collaboration. Proceedings of the ACM Second International Conference on Multimedia, San Francisco, CA, USA. 433–440.Gantz, J., Reinsel, D., Chute, C., Schlichting, W., Mcarthur, J., Minton, S., Xheneti, I., Toncheva, A. & Manfrediz, A. (2007). The expanding digital universe: a forecast of worldwide information growth through 2010. IDC, Massachusetts.Gowan, Jr. J.A. & Downs, J.M. (1994). Video conferencing human-machine interface: a field study. Information and Management, 27(6):341–356.Gupta, A., Mattarelli, E., Seshasai, S. & Broschak, J. (2009). Use of collaborative technologies and knowledge sharing in co-located and distributed teams: towards the 24-h knowledge factory. The Journal of Strategic Information Systems, 18:147–161.Hickson, I. (2009). The Web Socket Protocol IETF, Standards Track.Hong, J., Toye, G. & Leifer, L.J. (1996). Engineering design notebook for sharing and reuse. Computers in Industry, 29:27–35.Isaacs, E.A. & Tang, J.C. (1994). What video can and cannot do for collaboration: a case study. Multimedia Systems, 2(2):63–73.Karsenty, L. (1999). Cooperative work and shared visual context: an empirical study of comprehension problems in side-by-side and remote help dialogues. Human Computer Interaction, 14(3): 283–315.Lahti, H., Seitamaa-Hakkarainen, P. & Hakkarainen, K. (2004). Collaboration patterns in computer supported collaborative designing. Design Studies, 25:351–371.Leenders, R.T.A., Van Engelen, J.M. & Kratzer, J. (2003). Virtuality, communication, and new product team creativity: a social network perspective. Journal of Engineering and Technology Management, 20(1):69–92.Levitt, R.E., Jin, Y. & Dym, C.L. (1991). Knowledge-based support for management of concurrent, multidisciplinary design. Artificial Intelligence for Engineering, Design, Analysis and Manufacturing, 5(2):77–95.Li, C., McMahon, C. & Newnes, L. (2009). Annotation in product lifecycle management: a review of approaches. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2009. Vol. 2. New York: ASME, 797–806.Li, W.D., Lu, W.F., Fuh, J.Y. & Wong, Y.S. (2005). Collaborative computer-aided design-research and development status. Computer-Aided Design, 37(9):931–940.Londono, F., Cleetus, K.J., Nichols, D.M., Iyer, S., Karandikar, H.M., Reddy, S.M., Potnis, S.M., Massey, B., Reddy, A. & Ganti, V. (1992). Coordinating a virtual team. CERC-TR-RN-92-005, Concurrent Engineering Research Centre, West Virginia University, West Virginia.Lubell, J., Chen, K., Horst, J., Frechette, S., & Huang, P. (2012). Model based enterprise/technical data package summit report. NIST Technical Note, 1753.May, A. & Carter, C. (2001). A case study of virtual team working in the European automotive industry. International Journal of Industrial Ergonomics, 27(3):171–186.Olson, J.S., Olson, G.M. & Meader, D.K. (1995). What mix of video and audio is useful for small groups doing remote real-time design work? Proceedings of the SIGCHI Conference on Human Factors in Computing Systems. ACM Press, Addison-Wesley Publishing Co.Ping-Hung, H., Mishra, C.S. & Gobeli, D.H. (2003). The return on R&D versus capital expenditures in pharmaceutical and chemical industries. IEEE Transactions on Engineering Management, 50:141–150.Sharma, A. (2005). Collaborative product innovation: integrating elements of CPI via PLM framework. Computer-Aided Design, 37(13):1425–1434.Shum, S.J.B., Selvin, A.M., Sierhuis, M., Conklin, J., Haley, C.B. & Nuseibeh, B. (2006). Hypermedia support for argumentation-based rationale: 15 Years on from Gibis and Qoc. Rationale Management in Software Engineering, 111–132.Siltanen, P. & Valli, S. (2013). Web-based 3D Mediated Communication in Manufacturing Industry. Concurrent Engineering Approaches for Sustainable Product Development in a Multidisciplinary Environment, 1181–1192. Springer London.Stark, J. (2011). Product Lifecycle Management. 1–16. Springer London.Tavcar, J., Potocnik, U. & Duhovnik, J. (2013). PLM used as a backbone for concurrent engineering in supply chain. Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment, 681–692.Tay, F.E.H. & Ming, C. (2001). A shared multi-media design environment for concurrent engineering over the internet. Concurrent Engineering, 9(1):55–63.Tay, F.E.H. & Roy, A. (2003). CyberCAD: a collaborative approach in 3D-CAD technology in a multimedia-supported environment. Computers in Industry, 52(2):127–145.Toussaint, J. & Cheng, K. (2002). Design agility and manufacturing responsiveness on the web. Integrated Manufacturing Systems, 13(5):328–339.Tsoi, K.N. & Rahman, S.M. (1996). Media-on-demand multimedia electronic mail: a tool for collaboration on the web. Proceedings of the 5th IEEE International Symposium on High Performance Distributed Computing.Upton, D.M. & Mcafee, A. (1999). The Real Virtual Factory. Harvard Business School Press, 69–89.Vila, C., Estruch, A., Siller, H.R., Abellán, J.V. & Romero, F. (2007). Workflow methodology for collaborative design and manufacturing. Cooperative Design, Visualization, and Engineering 42–49, Springer Berlin Heidelberg.Wasiak, J., Hicks, B., Newnes, L., Dong, A., & Burrow, L. (2010). Understanding engineering email: the development of a taxonomy for identifying and classifying engineering work. Research in Engineering Design, 21(1):43–64.Wasko, M.M. & Faraj, S. (2005). Why should I share? Examining social capital and knowledge contribution in electronic networks of practice. MIS Quarterly: Management Information Systems, 29:35–57.Yang, Q.Z., Zhang, Y., Miao, C.Y. & Shen, Z.Q. (2008). Semantic annotation of digital engineering resources for multidisciplinary design collaboration. ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 617–624. American Society of Mechanical Engineers.You, C.F. & Chao, S.N. (2006). Multilayer architecture in collaborative environment. Concurrent Engineering Research and Applications, 14(4):273–281.Yuan, Y.C., Fulk, J., Monge, P.R. & Contractor, N. (2010). Expertise directory development, shared task interdependence, and strength of communication network ties as multilevel predictors of expertise exchange in transactive memory work groups. Communication Research, 37: 20–47