A Compromise between Neutrino Masses and Collider Signatures in the Type-II Seesaw Model

A natural extension of the standard $SU(2)_{\rm L} \times U(1)_{\rm Y}$ gauge model to accommodate massive neutrinos is to introduce one Higgs triplet and three right-handed Majorana neutrinos, leading to a $6\times 6$ neutrino mass matrix which contains three $3\times 3$ sub-matrices $M_{\rm L}$, $M_{\rm D}$ and $M_{\rm R}$. We show that three light Majorana neutrinos (i.e., the mass eigenstates of $\nu_e$, $\nu_\mu$ and $\nu_\tau$) are exactly massless in this model, if and only if $M_{\rm L} = M_{\rm D} M_{\rm R}^{-1} M_{\rm D}^T$ exactly holds. This no-go theorem implies that small but non-vanishing neutrino masses may result from a significant but incomplete cancellation between $M_{\rm L}$ and $M_{\rm D} M_{\rm R}^{-1} M_{\rm D}^T$ terms in the Type-II seesaw formula, provided three right-handed Majorana neutrinos are of ${\cal O}(1)$ TeV and experimentally detectable at the LHC. We propose three simple Type-II seesaw scenarios with the $A_4 \times U(1)_{\rm X}$ flavor symmetry to interpret the observed neutrino mass spectrum and neutrino mixing pattern. Such a TeV-scale neutrino model can be tested in two complementary ways: (1) searching for possible collider signatures of lepton number violation induced by the right-handed Majorana neutrinos and doubly-charged Higgs particles; and (2) searching for possible consequences of unitarity violation of the $3\times 3$ neutrino mixing matrix in the future long-baseline neutrino oscillation experiments.Comment: RevTeX 19 pages, no figure

Leadership and decision-making practices in public versus private universities in Pakistan

The goal of this study is to examine differences in leadership and decision-making practices in public and private universities in Pakistan, with a focus on transformational leadership (TL) and participative decision-making (PDM). We conducted semi-structured interviews with 46 deans and heads of department from two public and two private universities in Pakistan. Our findings indicate that leadership and decision-making practices are different in public and private universities. While differences were observed in all six types of TL-behaviour, the following three approaches emerged to be crucial in both public and private universities: (1) articulating a vision, (2) fostering the acceptance of group goals, and (3) high-performance expectations. In terms of PDM, deans and heads of department in public and private universities adopt a collaborative approach. However, on a practical level this approach is limited to teacher- and student-related matters. Overall, our findings suggest that the leadership and decision-making practices in Pakistani public and private universities are transformational and participative in nature

Agronomic Management of Indigenous Mycorrhizas

Many of the advantages conferred to plants by arbuscular mycorrhiza (AM) are associated to the ability of AM plants to explore a greater volume of soil through the extraradical mycelium. Sieverding (1991) estimates that for each centimetre of colonized root there is an increase of 15 cm3 on the volume of soil explored, this value can increase to 200 cm3 depending on the circumstances. Due to the enhancement of the volume of soil explored and the ability of the extraradical mycelium to absorb and translocate nutrients to the plant, one of the most obvious and important advantages resulting from mycorrhization is the uptake of nutrients. Among of which the ones that have immobilized forms in soil, such as P, assume particular significance. Besides this, many other benefits are recognized for AM plants (Gupta et al, 2000): water stress alleviation (Augé, 2004; Cho et al, 2006), protection from root pathogens (Graham, 2001), tolerance to toxic heavy metals and phytoremediation (Audet and Charest, 2006; Göhre and Paszkowski, 2006), tolerance to adverse conditions such as very high or low temperature, high salinity (Sannazzaro et al, 2006), high or low pH (Yano and Takaki, 2005) or better performance during transplantation shock (Subhan et al, 1998). The extraradical hyphae also stabilize soil aggregates by both enmeshing soil particles (Miller e Jastrow, 1992) and producing a glycoprotein, golmalin, which may act as a glue-like substance to adhere soil particles together (Wright and Upadhyaya, 1998). Despite the ubiquous distribution of mycorrhizal fungi (Smith and Read, 2000) and only a relative specificity between host plants and fungal isolates (McGonigle and Fitter, 1990), the obligate nature of the symbiosis implies the establishment of a plant propagation system, either under greenhouse conditions or in vitro laboratory propagation. These techniques result in high inoculum production costs, which still remains a serious problem since they are not competitive with production costs of phosphorus fertilizer. Even if farmers understand the significance of sustainable agricultural systems, the reduction of phosphorus inputs by using AM fungal inocula alone cannot be justified except, perhaps, in the case of high value crops (Saioto and Marumoto, 2002). Nurseries, high income horticulture farmers and no-agricultural application such as rehabilitation of degraded or devegetated landscapes are examples of areas where the use of commercial inoculum is current. Another serious problem is quality of commercial available products concerning guarantee of phatogene free content, storage conditions, most effective application methods and what types to use. Besides the information provided by suppliers about its inoculum can be deceiving, as from the usually referred total counts, only a fraction may be effective for a particular plant or in specific soil conditions. Gianinazzi and Vosátka (2004) assume that progress should be made towards registration procedures that stimulate the development of the mycorrhizal industry. Some on-farm inoculum production and application methods have been studied, allowing farmers to produce locally adapted isolates and generate a taxonomically diverse inoculum (Mohandas et al, 2004; Douds et al, 2005). However the inocula produced this way are not readily processed for mechanical application to the fields, being an obstacle to the utilization in large scale agriculture, especially row crops, moreover it would represent an additional mechanical operation with the corresponding economic and soil compaction costs. It is well recognized that inoculation of AM fungi has a potential significance in not only sustainable crop production, but also environmental conservation. However, the status quo of inoculation is far from practical technology that can be widely used in the field. Together a further basic understanding of the biology and diversity of AM fungi is needed (Abbott at al, 1995; Saito and Marumoto, 2002). Advances in ecology during the past decade have led to a much more detailed understanding of the potential negative consequences of species introductions and the potential for negative ecological consequences of invasions by mycorrhizal fungi is poorly understood. Schwartz et al, (2006) recommend that a careful assessment documenting the need for inoculation, and the likelihood of success, should be conducted prior to inoculation because inoculations are not universally beneficial. Agricultural practices such as crop rotation, tillage, weed control and fertilizer apllication all produce changes in the chemical, physical and biological soil variables and affect the ecological niches available for occupancy by the soil biota, influencing in different ways the symbiosis performance and consequently the inoculum development, shaping changes and upset balance of native populations. The molecular biology tools developed in the latest years have been very important for our perception of these changes, ensuing awareness of management choice implications in AM development. In this context, for extensive farming systems and regarding environmental and economic costs, the identification of agronomic management practices that allow controlled manipulation of the fungal community and capitalization of AM mutualistic effect making use of local inoculum, seem to be a wise option for mycorrhiza promotion and development of sustainable crop production

The dependence of dijet production on photon virtuality in ep collisions at HERA

The dependence of dijet production on the virtuality of the exchanged photon, Q^2, has been studied by measuring dijet cross sections in the range 0 < Q^2 < 2000 GeV^2 with the ZEUS detector at HERA using an integrated luminosity of 38.6 pb^-1. Dijet cross sections were measured for jets with transverse energy E_T^jet > 7.5 and 6.5 GeV and pseudorapidities in the photon-proton centre-of-mass frame in the range -3 < eta^jet <0. The variable xg^obs, a measure of the photon momentum entering the hard process, was used to enhance the sensitivity of the measurement to the photon structure. The Q^2 dependence of the ratio of low- to high-xg^obs events was measured. Next-to-leading-order QCD predictions were found to generally underestimate the low-xg^obs contribution relative to that at high xg^obs. Monte Carlo models based on leading-logarithmic parton-showers, using a partonic structure for the photon which falls smoothly with increasing Q^2, provide a qualitative description of the data.Comment: 35 pages, 6 eps figures, submitted to Eur.Phys.J.

The AFLOW Fleet for Materials Discovery

The traditional paradigm for materials discovery has been recently expanded to incorporate substantial data driven research. With the intent to accelerate the development and the deployment of new technologies, the AFLOW Fleet for computational materials design automates high-throughput first principles calculations, and provides tools for data verification and dissemination for a broad community of users. AFLOW incorporates different computational modules to robustly determine thermodynamic stability, electronic band structures, vibrational dispersions, thermo-mechanical properties and more. The AFLOW data repository is publicly accessible online at aflow.org, with more than 1.7 million materials entries and a panoply of queryable computed properties. Tools to programmatically search and process the data, as well as to perform online machine learning predictions, are also available.Comment: 14 pages, 8 figure

Development and validation of a visual grading scale for assessing image quality of AP pelvis radiographic images

OBJECTIVE: Apply psychometric theory to develop and validate a visual grading scale for assessing visual perception of AP pelvis digital image quality. METHODS: Psychometric theory was used to guide scale development. Seven phantom and 7 cadaver images of visually and objectively predetermined quality were used to help assess scale reliability and validity. 151 volunteers scored phantom images; 184 volunteers scored cadaver images. Factor analysis and Cronbach’s alpha were used to assess scale validity and reliability. RESULTS: A 24 item scale was produced. Aggregated mean volunteer scores for each image correlated with the rank order of the visually and objectively predetermined image qualities. Scale items had good inter-item correlation (≥0.2) and high factor loadings (≥0.3). Cronbach's alpha (reliability) revealed that the scale has acceptable levels of internal reliability for both phantom and cadaver images (α= 0.8 and 0.9, respectively). Factor analysis suggested the scale is multidimensional (assessing multiple quality themes). CONCLUSION: This study represents the first full development and validation of a visual image quality scale using psychometric theory. It is likely that this scale will have clinical, training and research applications. ADVANCES IN KNOWLEDGE: This article presents data to create and validate visual grading scales for radiographic examinations. The visual grading scale, for AP pelvis examinations, can act as a validated tool for future research, teaching and clinical evaluations of image quality

Angular and Current-Target Correlations in Deep Inelastic Scattering at HERA

Correlations between charged particles in deep inelastic ep scattering have been studied in the Breit frame with the ZEUS detector at HERA using an integrated luminosity of 6.4 pb-1. Short-range correlations are analysed in terms of the angular separation between current-region particles within a cone centred around the virtual photon axis. Long-range correlations between the current and target regions have also been measured. The data support predictions for the scaling behaviour of the angular correlations at high Q2 and for anti-correlations between the current and target regions over a large range in Q2 and in the Bjorken scaling variable x. Analytic QCD calculations and Monte Carlo models correctly describe the trends of the data at high Q2, but show quantitative discrepancies. The data show differences between the correlations in deep inelastic scattering and e+e- annihilation.Comment: 26 pages including 10 figures (submitted to Eur. J. Phys. C

Antidepressant use and risk of epilepsy and seizures in people aged 20 to 64 years: cohort study using a primary care database

Background: Epilepsy is a serious condition which can profoundly affect an individual’s life. While there is some evidence to suggest an association between antidepressant use and epilepsy and seizures it is conflicting and not conclusive. Antidepressant prescribing is rising in the UK so it is important to quantify absolute risks with individual antidepressants to enable shared decision making with patients. In this study we assess and quantify the association between antidepressant treatment and the risk of epilepsy and seizures in a large cohort of patients diagnosed with depression aged between 20 and 64 years. Methods: Data on 238,963 patients with a diagnosis of depression aged 20 to 64 from 687 UK practices were extracted from the QResearch primary care database. We used Cox’s proportional hazards to analyse the time to the first recorded diagnosis of epilepsy/seizures, excluding patients with a prior history and estimated hazard ratios for antidepressant exposure adjusting for potential confounding variables. Results: In the first 5 years of follow-up, 878 (0.37 %) patients had a first diagnosis of epilepsy/seizures with the hazard ratio (HR) significantly increased (P < 0.01) for all antidepressant drug classes and for 8 of the 11 most commonly prescribed drugs. The highest risks (in the first 5 years) compared with no treatment were for trazodone (HR 5.41, 95 % confidence interval (CI) 3.05 to 9.61, number needed to harm (NNH) 65), lofepramine (HR 3.09, 95 % CI 1.73 to 5.50, NNH 138), venlafaxine (HR 2.84, 95 % CI 1.97 to 4.08, NNH 156) and combined antidepressant treatment (HR 2.73, 95 % CI 1.52 to 4.91, NNH 166). Conclusions: Risk of epilepsy/seizures is significantly increased for all classes of antidepressant. There is a need for individual risk-benefit assessments in patients being considered for antidepressant treatment, especially those with ongoing mild depression or with additional risk factors. Residual confounding and indication bias may influence our results, so confirmation may be required from additional studies

Beauty photoproduction measured using decays into muons in dijet events in ep collisions at s\sqrt{s}=318 GeV

The photoproduction of beauty quarks in events with two jets and a muon has been measured with the ZEUS detector at HERA using an integrated luminosity of 110 pb$^{- 1}$. The fraction of jets containing b quarks was extracted from the transverse momentum distribution of the muon relative to the closest jet. Differential cross sections for beauty production as a function of the transverse momentum and pseudorapidity of the muon, of the associated jet and of $x_{\gamma}^{jets}$, the fraction of the photon's momentum participating in the hard process, are compared with MC models and QCD predictions made at next-to-leading order. The latter give a good description of the data.Comment: 32 pages, 6 tables, 7 figures Table 6 and Figure 7 revised September 200

Plastisol Foaming Process. Decomposition of the Foaming Agent, Polymer Behavior in the Corresponding Temperature Range and Resulting Foam Properties

The decomposition of azodicarbonamide, used as foaming agent in PVC - plasticizer (1/1) plastisols was studied by DSC. Nineteen different plasticizers, all belonging to the ester family, two being polymeric (polyadipates), were compared. The temperature of maximum decomposition rate (in anisothermal regime at 5 K min-1 scanning rate), ranges between 434 and 452 K. The heat of decomposition ranges between 8.7 and 12.5 J g -1. Some trends of variation of these parameters appear significant and are discussed in terms of solvent (matrix) and viscosity effects on the decomposition reactions. The shear modulus at 1 Hz frequency was determined at the temperature of maximum rate of foaming agent decomposition, and differs significantly from a sample to another. The foam density was determined at ambient temperature and the volume fraction of bubbles was used as criterion to judge the efficiency of the foaming process. The results reveal the existence of an optimal shear modulus of the order of 2 kPa that corresponds roughly to plasticizer molar masses of the order of 450 ± 50 g mol-1. Heavier plasticizers, especially polymeric ones are too difficult to deform. Lighter plasticizers such as diethyl phthalate (DEP) deform too easily and presumably facilitate bubble collapse