319 research outputs found
Solutions to the ultradiscrete Toda molecule equation expressed as minimum weight flows of planar graphs
We define a function by means of the minimum weight flow on a planar graph
and prove that this function solves the ultradiscrete Toda molecule equation,
its B\"acklund transformation and the two dimensional Toda molecule equation.
The method we employ in the proof can be considered as fundamental to the
integrability of ultradiscrete soliton equations.Comment: 14 pages, 10 figures Added citations in v
Differential distribution of microtubules in immature osteocytes in vivo
Objectives: The transition from osteoblasts to osteocytes is associated with dramatic changes in the cytoskeleton. We previously showed that the formation of osteoblast cell processes in 3D culture is microtubule dependent. However, the distribution of microtubules during the transition from osteoblasts to osteocytes in vivo is unknown. In this study, we investigated the distribution of microtubules in osteocytes in vivo. Methods: We observed the microtubules in osteocytes in chick embryonic calvaria via fluorescence staining of microtubules and confocal laser scanning microscopy. Results: Microtubules were observed throughout the cytoplasm in all examined osteoblasts. In immature osteocytes, several cell processes contained microtubules, whereas in mature osteocytes, microtubules were localized only in the cell body. Conclusion: These results suggest that the early arrangement of microtubules may be correlated with the initial development of osteocyte processes. (C) 2018 Japanese Association for Oral Biology. Published by Elsevier B.V. All rights reserved.Peer reviewe
Vapors-liquid phase separator
The use of porous plugs, mostly with in the form of passive devices with constant area were considered as vapor-liquid phase separators for helium 2 storage vessels under reduced gravity. The incorporation of components with variable cross sectional area as a method of flow rate modification was also investigated. A particular device which uses a shutter-type system for area variation was designed and constructed. This system successfully permitted flor rate changes of up to plus or minus 60% from its mean value
Distillation of Liquid Xenon to Remove Krypton
A high performance distillation system to remove krypton from xenon was
constructed, and a purity level of Kr/Xe = was
achieved. This development is crucial in facilitating high sensitivity low
background experiments such as the search for dark matter in the universe.Comment: 15 pages, 11 figure
Foetal neural progenitors contribute to postnatal circuits formation ex vivo: an electrophysiological investigation
Neuronal progenitor cells (NPC) play an essential role in homeostasis of the central nervous system (CNS). Considering their ability to differentiate into specific lineages, their manipulation and control could have a major therapeutic impact for those CNS injuries or degenerative diseases characterized by neuronal cell loss. In this work, we established an in vitro co-culture and tested the ability of foetal NPC (fNPC) to integrate among post-mitotic hippocampal neurons and contribute to the electrical activity of the resulting networks. We performed extracellular electrophysiological recordings of the activity of neuronal networks and compared the properties of spontaneous spiking in hippocampal control cultures (HCC), fNPC, and mixed circuitries ex vivo. We further employed patch-clamp intracellular recordings to examine single-cell excitability. We report of the capability of fNPC to mature when combined to hippocampal neurons, shaping the profile of network activity, a result suggestive of newly formed connectivity ex vivo
A study on the sharp knee and fine structures of cosmic ray spectra
The paper investigates the overall and detailed features of cosmic ray (CR)
spectra in the knee region using the scenario of nuclei-photon interactions
around the acceleration sources. Young supernova remnants can be the physical
realities of such kind of CR acceleration sites. The results show that the
model can well explain the following problems simultaneously with one set of
source parameters: the knee of CR spectra and the sharpness of the knee, the
detailed irregular structures of CR spectra, the so-called "component B" of
Galactic CRs, and the electron/positron excesses reported by recent
observations. The coherent explanation serves as evidence that at least a
portion of CRs might be accelerated at the sources similar to young supernova
remnants, and one set of source parameters indicates that this portion mainly
comes from standard sources or from a single source.Comment: 13 pages, 4 figures, accepted for publication in SCIENCE CHINA
Physics, Mechanics & Astronomy
The CALorimetric Electron Telescope (CALET) for high-energy astroparticle physics on the International Space Station
The CALorimetric Electron Telescope (CALET) is a space experiment, currently under development by Japan in collaboration with Italy and the United States, which will measure the flux of cosmic-ray electrons (and positrons) up to 20 TeV energy, of gamma rays up to 10 TeV, of nuclei with Z from 1 to 40 up to 1 PeV energy, and will detect gamma-ray bursts in the 7 keV to 20 MeV energy range during a 5 year mission. These measurements are essential to investigate possible nearby astrophysical sources of high energy electrons, study the details of galactic particle propagation and search for dark matter signatures. The main detector of CALET, the Calorimeter, consists of a module to identify the particle charge, followed by a thin imaging calorimeter (3 radiation lengths) with tungsten plates interleaving scintillating fibre planes, and a thick energy measuring calorimeter (27 radiation lengths) composed of lead tungstate logs. The Calorimeter has the depth, imaging capabilities and energy resolution necessary for excellent separation between hadrons, electrons and gamma rays. The instrument is currently being prepared for launch (expected in 2015) to the International Space Station ISS, for installation on the Japanese Experiment Module - Exposure Facility (JEM-EF)
First application of mass measurement with the Rare-RI Ring reveals the solar r-process abundance trend at A=122 and A=123
The Rare-RI Ring (R3) is a recently commissioned cyclotron-like storage ring
mass spectrometer dedicated to mass measurements of exotic nuclei far from
stability at Radioactive Isotope Beam Factory (RIBF) in RIKEN. The first
application of mass measurement using the R3 mass spectrometer at RIBF is
reported. Rare isotopes produced at RIBF, Sn, In, Cd,
Ag, Pd, were injected in R3. Masses of In, Cd,
and Pd were measured whereby the mass uncertainty of Pd was
improved. This is the first reported measurement with a new storage ring mass
spectrometery technique realized at a heavy-ion cyclotron and employing
individual injection of the pre-identified rare nuclei. The latter is essential
for the future mass measurements of the rarest isotopes produced at RIBF. The
impact of the new Pd result on the solar -process abundances in a
neutron star merger event is investigated by performing reaction network
calculations of 20 trajectories with varying electron fraction . It is
found that the neutron capture cross section on Pd increases by a
factor of 2.2 and -delayed neutron emission probability,
, of Rh increases by 14\%. The neutron capture cross
section on Pd decreases by a factor of 2.6 leading to pileup of
material at , thus reproducing the trend of the solar -process
abundances. The trend of the two-neutron separation energies (S)
was investigated for the Pd isotopic chain. The new mass measurement with
improved uncertainty excludes large changes of the S value at
. Such large increase of the S values before was
proposed as an alternative to the quenching of the shell gap to
reproduce -process abundances in the mass region of
Fluid flow in the osteocyte mechanical environment : a fluid-structure interaction approach
Osteocytes are believed to be the primary sensor of mechanical stimuli in bone, which orchestrate osteoblasts and osteoclasts to adapt bone structure and composition to meet physiological loading demands. Experimental studies to quantify the mechanical environment surrounding bone cells are challenging, and as such, computational and theoretical approaches have modelled either the solid or fluid environment of osteocytes to predict how these cells are stimulated in vivo. Osteocytes are an elastic cellular structure that deforms in response to the external fluid flow imposed by mechanical loading. This represents a most challenging multi-physics problem in which fluid and solid domains interact, and as such, no previous study has accounted for this complex behaviour. The objective of this study is to employ fluid–structure interaction (FSI) modelling to investigate the complex mechanical environment of osteocytes in vivo. Fluorescent staining of osteocytes was performed in order to visualise their native environment and develop geometrically accurate models of the osteocyte in vivo. By simulating loading levels representative of vigorous physiological activity (3,000με compression and 300 Pa pressure gradient), we predict average interstitial fluid velocities (∼60.5μ m/s ) and average maximum shear stresses (∼11 Pa ) surrounding osteocytes in vivo. Interestingly, these values occur in the canaliculi around the osteocyte cell processes and are within the range of stimuli known to stimulate osteogenic responses by osteoblastic cells in vitro. Significantly our results suggest that the greatest mechanical stimulation of the osteocyte occurs in the cell processes, which, cell culture studies have indicated, is the most mechanosensitive area of the cell. These are the first computational FSI models to simulate the complex multi-physics mechanical environment of osteocyte in vivo and provide a deeper understanding of bone mechanobiology
Inhibition of Osteoclastogenesis by Mechanically Loaded Osteocytes: Involvement of MEPE
In regions of high bone loading, the mechanoresponsive osteocytes inhibit osteoclastic bone resorption by producing signaling molecules. One possible candidate is matrix extracellular phosphoglycoprotein (MEPE) because acidic serine- and aspartate-rich MEPE-associated motif peptides upregulate osteoprotegerin (OPG) gene expression, a negative regulator of osteoclastogenesis. These peptides are cleaved from MEPE when relatively more MEPE than PHEX (phosphate-regulating gene with homology to endopeptidases on the X chromosome) is present. We investigated whether mechanical loading of osteocytes affects osteocyte-stimulated osteoclastogenesis by involvement of MEPE. MLO-Y4 osteocytes were mechanically loaded by 1-h pulsating fluid flow (PFF; 0.7 ± 0.3 Pa, 5 Hz) or kept under static control conditions. Recombinant MEPE (0.05, 0.5, or 5 μg/ml) was added to some static cultures. Mouse bone marrow cells were seeded on top of the osteocytes to determine osteoclastogenesis. Gene expression of MEPE, PHEX, receptor activator of nuclear factor kappa-B ligand (RANKL), and OPG by osteocytes was determined after PFF. Osteocytes supported osteoclast formation under static control conditions. Both PFF and recombinant MEPE inhibited osteocyte-stimulated osteoclastogenesis. PFF upregulated MEPE gene expression by 2.5-fold, but not PHEX expression. PFF decreased the RANKL/OPG ratio at 1-h PFF treatment. Our data suggest that mechanical loading induces changes in gene expression by osteocytes, which likely contributes to the inhibition of osteoclastogenesis after mechanical loading of bone. Because mechanical loading upregulated gene expression of MEPE but not PHEX, possibly resulting in the upregulation of OPG gene expression, we speculate that MEPE is a soluble factor involved in the inhibition of osteoclastogenesis by osteocytes
- …