The Effect of Ionizing Irradiation on Type I Collagen of the Tail in Growing Mice: A Histology and Electron Microscopy Study

In order to examine the effect of radiation on growing tissue, especially the fibroblasts and their end-product, the collagen fibres, tails from 24 mice were irradiated at an age of 8 days with 20 Gy and 30 Gy (\u3e°Co). Tails from 18 animals served as controls. Six mice from each group were sacrificed on day 8, 20 and 30. Transmission electron microscopy was used to examine the fibroblasts and the collagen fibrils. Non-irradiated fibroblasts had a nucleus rich in chromatin and an abundant endoplasmic reticulum with cistemae and condensing vacuoles. On day 20, approximately 50 % , and on day 30, 25 % of the fibroblasts irradiated with 30 Gy had a sparse endoplasmic reticulum pointing to a reduction of protein synthesis. While, on day 20, the fibrils irradiated with 20 Gy and with 30 Gy had significantly larger diameters compared to the controls, on day 30, the irradiated fibrils had a notably smaller diameter compared to the controls; 30 Gy-fibrils were larger than the 20 Gy-fibrils on both days. On day 20, the binding mean value of the 30 Gy-fibrils exceeded that of the controls and was significantly higher than that of the 20 Gy-fibrils, which was lower, though not significantly, than the controls. On day 30, the banding mean value of the 30 Gy-fibrils was notably lower than the control; and the value of the 20 Gy-fibrils was significantly lower than that of the 30 Gy-fibrils. The results are explained as an edema together with an inhibitory effect on the protein synthesis of the fibroblasts caused by the irradiation. This deduction 1s further supported by light microscopy of the tails

Early Miocene carbonate ramp development in a warm ocean, North West Shelf, Australia

Although carbonate ramps are widely described from the geological record,there is still a debate on the relative influence of water temperature, trophicconditions and type of carbonate factories on their development. Theca2400 km long Australian North West Shelf is among the largest Cenozoic car-bonate provinces worldwide, and records a transition from an early Mioceneramp to a middle Miocene rimmed platform. This change is observable onpublicly available seismic data, giving the opportunity to investigate envi-ronmental influences on platform evolution. This study combines macro-scopic and petrographic descriptions of early Miocene strata cropping out inthe Cape Range Anticline (North West Cape, southern end of the North WestShelf) and of time-equivalent well cuttings from the adjacent, offshoreExmouth Sub-basin. Particular emphasis is placed on the identification oflarger benthic foraminifera at a broad generic level, because differing taxahave a limited range of habitable conditions that serve as environmentalproxies. The results show that early Miocene strata are dominantly com-posed of larger benthic foraminifera with minor coralline algae in the proxi-mal platform, grading to micropackstones in the more distal platform. Aramp margin is inferred from the lithological data on the basis of the lack offramework builders and the presence of open oceanic indicators. Facies shal-low upward through individual outcrops, with a proximal to distal trendtowards the north-west. These trends along outcrops are consistent with theseismic interpretations. Identification of taxa with warm, oligotrophic wateraffinity suggests that the ramp was formed in an oligotrophic and warmocean, despite the absence of coral reefs. Changes of carbonate facies withdepth do not seem to be associated with changes in ramp morphology, andthe latter may have been controlled by physical oceanic parameters, such asoffshore currents and waves.Early Miocene carbonate ramp development in a warm ocean, North West Shelf, AustraliapublishedVersio

A First Comparison of the responses of a He4-based fast-neutron detector and a NE-213 liquid-scintillator reference detector

A first comparison has been made between the pulse-shape discrimination characteristics of a novel $^{4}$He-based pressurized scintillation detector and a NE-213 liquid-scintillator reference detector using an Am/Be mixed-field neutron and gamma-ray source and a high-resolution scintillation-pulse digitizer. In particular, the capabilities of the two fast neutron detectors to discriminate between neutrons and gamma-rays were investigated. The NE-213 liquid-scintillator reference cell produced a wide range of scintillation-light yields in response to the gamma-ray field of the source. In stark contrast, due to the size and pressure of the $^{4}$He gas volume, the $^{4}$He-based detector registered a maximum scintillation-light yield of 750~keV$_{ee}$ to the same gamma-ray field. Pulse-shape discrimination for particles with scintillation-light yields of more than 750~keV$_{ee}$ was excellent in the case of the $^{4}$He-based detector. Above 750~keV$_{ee}$ its signal was unambiguously neutron, enabling particle identification based entirely upon the amount of scintillation light produced.Comment: 23 pages, 7 figures, Nuclear Instruments and Methods in Physics Research Section A review addresse

Self-reported vs. objectively assessed adherence to inhaled corticosteroids in asthma

BACKGROUND: Adherence to inhaled corticosteroids (ICS) in asthma is vital for disease control. However, obtaining reliable and clinically useful measures of adherence remains a major challenge. We investigated the association between patient-reported adherence and objectively measured adherence based on filled prescriptions with inhaled corticosteroids in adults with asthma. METHODS: In total, 178 patients with asthma were asked to self-assess adherence during routine visits at a respiratory outpatient clinic. Self-assessment was performed using Foster score (“How many days in a 7-day week do you take your medication as prescribed?”, with the answer divided by 7). Objective adherence was calculated as medication possession ratio (MPR). Bivariate and multivariable linear regression, adjusted for age, sex, FEV(1), GINA treatment step, excessive use of SABA, and history of exacerbations were used for analyses. RESULTS: Of the included patients, 87.6% reported a Foster score of 100%, while the mean ICS MPR was 54.0% (SD 25%). Complex regimens such as twice-daily dosing or dual inhaler-use were associated with lower adherence (p = 0.015 and p < 0.001, respectively). Foster score was predictive of ICS MPR, with an absolute 32% increase in MPR between patients reporting Foster scores of 0 and 100% (95% CI 13–50%, p < 0.001). Female sex predicted higher ICS MPR (p = 0.019). Previous asthma-related hospitalization(s) predicted lower ICS MPR (p = 0.039). CONCLUSION: Although a weak association was found between Foster score and ICS MPR, findings do not support the use of Foster score, and by that self-reported adherence, as a reliable marker of controller adherence in asthma due to significant mismatch between patient-reported adherence and MPR. Future studies should address the complex interplay between patient-reported and objectively assessed adherence to controller medication in asthma. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1186/s40733-021-00072-2

Pulping and pretreatment affect the characteristics of bagasse inks for 3D printing

Bagasse is an underutilized agro-industrial residue with great potential as raw material for the production of cellulose nanofibrils (CNF) for a range of applications. In this study, we have assessed the suitability of bagasse for production of CNF for three-dimensional (3D) printing. First, pulp fibers were obtained from the bagasse raw material using two fractionation methods, i.e. soda and hydrothermal treatment combined with soda. Second, the pulp fibers were pretreated by TEMPO-mediated oxidation using two levels of oxidation for comparison purposes. Finally, the CNF were characterized in detail and assessed as inks for 3D printing. The results show that CNF produced from fibers obtained by hydrothermal and soda pulping were less nanofibrillated than the corresponding material produced by soda pulping. However, the CNF sample obtained from soda pulp was cytotoxic, apparently due to a larger content of silica particles. All the CNF materials were 3D printable. We conclude that the noncytotoxic CNF produced from hydrothermally and soda treated pulp can potentially be used as inks for 3D printing of biomedical devices.Fil: Chinga Carrasco, Gary. RISE PFI; NoruegaFil: Ehman, Nanci Vanesa. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Nordeste. Instituto de Materiales de Misiones. Universidad Nacional de Misiones. Facultad de Ciencias Exactas Químicas y Naturales. Instituto de Materiales de Misiones; ArgentinaFil: Pettersson, Jennifer. RISE Bioscience and Materials; SueciaFil: Vallejos, María Evangelina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Nordeste. Instituto de Materiales de Misiones. Universidad Nacional de Misiones. Facultad de Ciencias Exactas Químicas y Naturales. Instituto de Materiales de Misiones; ArgentinaFil: Felissia, Fernando Esteban. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Nordeste. Instituto de Materiales de Misiones. Universidad Nacional de Misiones. Facultad de Ciencias Exactas Químicas y Naturales. Instituto de Materiales de Misiones; ArgentinaFil: Hakansson, Joakim. RISE Bioscience and Materials; SueciaFil: Area, Maria Cristina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Nordeste. Instituto de Materiales de Misiones. Universidad Nacional de Misiones. Facultad de Ciencias Exactas Químicas y Naturales. Instituto de Materiales de Misiones; Argentin

Postglacial relative sea level change and glacier activity in the early and late Holocene:Wahlenbergfjorden, Nordaustlandet, Svalbard

Publisher's version (útgefin grein).Sediment cores from Kløverbladvatna, a threshold lake in Wahlenbergfjorden, Nordaustlandet, Svalbard were used to reconstruct Holocene glacier fluctuations. Meltwater from Etonbreen spills over a threshold to the lake, only when the glacier is significantly larger than at present. Lithological logging, loss-on-ignition, ITRAX scanning and radiocarbon dating of the cores show that Kløverbladvatna became isolated from Wahlenbergfjorden c. 5.4 cal. kyr BP due to glacioisostatic rebound. During the Late Holocene, laminated clayey gyttja from lacustrine organic production and surface runoff from the catchment accumulated in the lake. The lacustrine sedimentary record suggests that meltwater only spilled over the threshold at the peak of the surge of Etonbreen in AD 1938. Hence, we suggest that this was the largest extent of Etonbreen in the (mid-late) Holocene. In Palanderbukta, a tributary fjord to Wahlenbergfjorden, raised beaches were surveyed and organic material collected to determine the age of the beaches and reconstruct postglacial relative sea level change. The age of the postglacial raised beaches ranges from 10.7 cal. kyr BP at 50 m a.s.l. to 3.13 cal. kyr BP at 2 m a.s.l. The reconstructed postglacial relative sea level curve adds valuable spatial and chronological data to the relative sea level record of Nordaustlandet.Sveinn Brynjólfsson and Sara Mollie Cohen are thanked for field assistance. Fieldwork and radiocarbon dates were funded by the Carlsberg Foundation (CF14-0756 to Schomacker) and Department of Arctic Geology, The University Centre in Svalbard (UNIS), respectively. Geospatial support was provided by the Polar Geospatial Center, and DEM(s) were created from DigitalGlobe, Inc., imagery and funded under National Science Foundation awards 1043681, 1559691, and 1542736. We thank Ole Bennike, Svend Funder, Antony Ruter, and Peter Ilsøe for macrofossil identification and lab assistance. The manuscript benefited from constructive review comments from Andy Emery. The publication charges for this article have been funded by a grant from the publication fund of UiT The Arctic University of Norway.Peer Reviewe

Tagging fast neutrons from an 241Am/9Be source

We report on an investigation of the fast-neutron spectrum emitted by 241Am/9Be. Well-understood shielding, coincidence, and time-of-flight measurement techniques are employed to produce a continuous, polychromatic, energy-tagged neutron beam.Comment: 17 pages, 7 figures, submitted to Journal of Applied Radiation and Isotope

The ERCC1/XPF endonuclease is required for completion of homologous recombination at DNA replication forks stalled by inter-strand cross-links

Both the ERCC1-XPF complex and the proteins involved in homoIogous recombination (HR) have critical roles in inter-strand cross-link (ICL) repair. Here, we report that mitomycin C-induced lesions inhibit replication fork elongation. Furthermore, mitomycin C-induced DNA double-strand breaks (DSBs) are the result of the collapse of ICL-stalled replication forks. These are not formed through replication run off, as we show that mitomycin C or cisplatin-induced DNA lesions are not incised by global genome nucleotide excision repair (GGR). We also suggest that ICL-lesion repair is initiated either by replication or transcription, as the GGR does not incise ICL-lesions. Furthermore, we report that RAD51 foci are induced by cisplatin or mitomycin C independently of ERCC1, but that mitomycin C-induced HR measured in a reporter construct is impaired in ERCC1-defective cells. These data suggest that ERCC1–XPF plays a role in completion of HR in ICL repair. We also find no additional sensitivity to cisplatin by siRNA co-depletion of XRCC3 and ERCC1, showing that the two proteins act on the same pathway to promote survival