Seasonal Variability in Fine Particulate Matter Water Content and Estimated pH over a Coastal Region in the Northeast Arabian Sea

The acidity of atmospheric particles can promote specific chemical processes that result in the production of extra condensed phases from lesser volatile species (secondary fine particulate matter), change the optical and water absorption characteristics of particles, and enhance trace metal solubility that can function as essential nutrients in nutrient-limited environments. In this study, we present an estimated pH of fine particulate matter (FPM) through a thermodynamic model and assess its temporal variability over a coastal location in the northeast Arabian Sea. Here, we have used the chemical composition of FPM (PM2.5) collected during the period between 2017–2019. Chemical composition data showed large variability in water-soluble ionic concentrations (WSIC; range: 2.3–39.9 μg m−3) with higher and lower average values during the winter and summer months, respectively. SO42− ions were predominant among anions, while NH4+ was a major contributor among cations throughout the season. The estimated pH of FPM from the forward and reverse modes exhibits a moderate correlation for winter and summer samples. The estimated pH of FPM is largely regulated by SO42− content and strongly depends on the relative ambient humidity, particularly in the forward mode. Major sources of FPM assessed based on Positive matrix factorization (PMF) and air-mass back trajectory analyses demonstrate the dominance of natural sources (sea salt and dust) during summer months, anthropogenic sources in winter months and mixed sources during the post-monsoon season

On distinguishing the natural and human-induced sources of airborne pathogenic viable bioaerosols: characteristic assessment using advanced molecular analysis

Ambient air consists of bioaerosols that constitute many microbes from biosphere due to natural and anthropogenic activities. Size-dependent ambient measurements of bioaerosols at two seminatural and three anthropogenic coastal sites in southern tropical India were taken during the summer 2017. All the five sites considered in this study considerably contributed to the bioaerosol burden with larger contribution from the dumping yard site followed by the marshland site, wastewater treatment plant, composting site, and Indian Institute of Technology Madras. The colony-forming units concentration for all the sites ranged from 17 to 2750 m−3 for bacteria and 42–2673 m−3 for fungi. Firmicutes and Actinomycetes were the dominant phyla observed in 698 bacterial OTUs obtained, and Ascomycota and Zygomycota were the dominant phyla observed in 159 fungal OTUs obtained in the study. Further, the study revealed the presence of pathogenic and ice-nucleating bacteria and fungi in the bioaerosols that can largely affect the well-being of the human population and vegetation in this region. Moreover, the statistical analysis revealed high bacterial abundance and diversity at the grit chamber of wastewater treatment plant and high fungal abundance and diversity at the dumping yard. Further, principal coordinate analysis of the sites studied inferred that the marshland, wastewater treatment plant, and the dumping yard sites shared similar microbial community composition indicating the existence of similar source materials and activities at the sites. Further, this study evidently brings out the fact that urban locations may play an important role in anthropogenic contribution of both pathogenic and ice-nucleating microorganisms. © 2020, Springer Nature Switzerland AG

Rapid growth and high cloud-forming potential of anthropogenic sulfate aerosol in a thermal power plant plume during COVID lockdown in India

The COVID lockdown presented an interesting opportunity to study the anthropogenic emissions from different sectors under relatively cleaner conditions in India. The complex interplays of power production, industry, and transport could be dissected due to the significantly reduced influence of the latter two emission sources. Here, based on measurements of cloud condensation nuclei (CCN) activity and chemical composition of atmospheric aerosols during the lockdown, we report an episodic event resulting from distinct meteorological conditions. This event was marked by rapid growth and high hygroscopicity of new aerosol particles formed in the SO2 plume from a large coal-fired power plant in Southern India. These sulfate-rich particles had high CCN activity and number concentration, indicating high cloud-forming potential. Examining the sensitivity of CCN properties under relatively clean conditions provides important new clues to delineate the contributions of different anthropogenic emission sectors and further to understand their perturbations of past and future climate forcing

An overview of the Amazonian Aerosol Characterization Experiment 2008 (AMAZE-08)

The Amazon Basin provides an excellent environment for studying the sources, transformations, and properties of natural aerosol particles and the resulting links between biological processes and climate. With this framework in mind, the Amazonian Aerosol Characterization Experiment (AMAZE-08), carried out from 7 February to 14 March 2008 during the wet season in the central Amazon Basin, sought to understand the formation, transformations, and cloud-forming properties of fine- and coarse-mode biogenic aerosol particles, especially as related to their effects on cloud activation and regional climate. Special foci included (1) the production mechanisms of secondary organic components at a pristine continental site, including the factors regulating their temporal variability, and (2) predicting and understanding the cloud-forming properties of biogenic particles at such a site. In this overview paper, the field site and the instrumentation employed during the campaign are introduced. Observations and findings are reported, including the large-scale context for the campaign, especially as provided by satellite observations. New findings presented include: (i) a particle number-diameter distribution from 10 nm to 10 Î1/4m that is representative of the pristine tropical rain forest and recommended for model use; (ii) the absence of substantial quantities of primary biological particles in the submicron mode as evidenced by mass spectral characterization; (iii) the large-scale production of secondary organic material; (iv) insights into the chemical and physical properties of the particles as revealed by thermodenuder-induced changes in the particle number-diameter distributions and mass spectra; and (v) comparisons of ground-based predictions and satellite-based observations of hydrometeor phase in clouds. A main finding of AMAZE-08 is the dominance of secondary organic material as particle components. The results presented here provide mechanistic insight and quantitative parameters that can serve to increase the accuracy of models of the formation, transformations, and cloud-forming properties of biogenic natural aerosol particles, especially as related to their effects on cloud activation and regional climate. © 2010 Author(s)

Impact of international travel dynamics on domestic spread of 2019-nCoV in India: origin-based risk assessment in importation of infected travelers

The recent pandemic caused by the 2019 outbreak of novel coronavirus (2019-nCoV or COVID-19) has affected more than 3.0 million people resulting ~ 212,000 deaths across 215 countries/territories as on 28th April 2020. The importation of the cases owing to enormous international travels from the affected countries is the foremost reason for local cycle of transmission. For a country like India, the second most populous country in the world with ~ 1.35 billion population, the management and control of 2019-nCoV domestic spread heavily relied on effective screening and strict quarantine of passengers arriving at various international airports in India from affected countries. Here, by extracting the data from FLIRT, an online airline database for more than 800 airlines, and scanning more than 180,000 flights and 39.9 million corresponding passenger seats during 4th – 25th March, we show that India experienced the highest risk index of importing the passengers from middle eastern airports. Contrary to perception, travelers from China imposed lowest risk of importing the infected cases in India. This is clearly evident form the fact that while the number of infected cases were on the peak in China India was one of the least affected countries. The number of cases in India started exhibiting a sharp increase in the infected cases only after the European countries and USA recorded large number of infected cases. We further argue that while the number of cases in middle eastern countries may still be very low, the airports in middle eastern countries, particularly Dubai, being one of the largest transit hubs for international passengers, including arriving in India, might have posed a higher risk of getting infected with 2019-nCoV. We suggest that any future travel related disease infection screening at the airports should critically assess the passengers from major transit hubs in addition to affected country of origin

Mechanisms and Pathways for Coordinated Control of Fine Particulate Matter and Ozone

Purpose of Review: Fine particulate matter (PM2.5) and ground-level ozone (O3) pose a significant risk to human health. The World Health Organization (WHO) has recently revised healthy thresholds for both pollutants. The formation and evolution of PM2.5 and O3 are however governed by complex physical and multiphase chemical processes, and therefore, it is extremely challenging to mitigate both pollutants simultaneously. Here, we review mechanisms and discuss the science-informed pathways for effective and simultaneous mitigation of PM2.5 and O3. Recent Findings: Global warming has led to a general increase in biogenic emissions, which can enhance the formation of O3 and secondary organic aerosols. Reductions in anthropogenic emissions during the COVID-19 lockdown reduced PM2.5; however, O3 was enhanced in several polluted regions. This was attributed to more intense sunlight due to low aerosol loading and non-linear response of O3 to NOx. Such contrasting physical and chemical interactions hinder the formulation of a clear roadmap for clean air over such regions. Summary: Atmospheric chemistry including the role of biogenic emissions, aerosol-radiation interactions, boundary layer, and regional-scale transport are the key aspects that need to be carefully considered in the formulation of mitigation pathways. Therefore, a thorough understanding of the chemical effects of the emission reductions, changes in photolytic rates and boundary layer due to perturbation of solar radiation, and the effect of meteorological/seasonal changes are needed on a regional basis. Statistical emulators and machine learning approaches can aid the cumbersome process of multi-sector multi-species source attribution

Characteristics of tropospheric ozone variability over an urban site in Southeast Asia: A study based on MOZAIC and MOZART vertical profiles

The Measurement of Ozone and Water Vapor by Airbus In-Service Aircraft (MOZAIC) profiles of O3 and CO were analyzed to study their variation in the troposphere over Bangkok. Mixing ratios of O3 and CO were enhanced in planetary boundary layer (PBL) being highest in winter followed by summer and wet seasons. The daytime profiles of O3 show higher values compared to nighttime observations in PBL region, but little differences were observed in the free troposphere. The decreasing mixing ratios of O3 in the lower and upper troposphere were associated with shallow and deep convections, respectively. Back trajectory and fire count data indicate that the seasonal variations in trace gases were caused mainly by the regional shift in long-range transport and biomass-burning patterns. In wet season, flow of oceanic air and negligible presence of local biomass burning resulted in lowest O3 and CO, while their high levels in dry season were due to extensive biomass burning and transport of continental air masses. The Model for Ozone and Related Chemical Tracers (MOZART) underestimated both O3 and CO in the PBL region but overestimated these in the free troposphere. Simulations of O3 and CO also show the daytime/nighttime differences but do not capture several key features observed in the vertical distributions. The observed and simulated values of O3 and CO during September–November 2006 were significantly higher than the same period of 2005. The year-to-year differences were mainly due to El Niño-led extensive fires in Indonesia during 2006 but normal condition during 2005

Size-resolved and integral measurements of cloud condensation nuclei (CCN) at the high-alpine site Jungfraujoch

As part of the CLACE-6 campaign we performed size-resolved CCN measurements for a~supersaturation range of S = 0.079 % to 0.66% at the high-alpine research station Jungfraujoch, Switzerland, in March~2007. The derived effective hygroscopicity parameter κ describing the influence of particle composition on CCN activity was on average 0.23–0.30 for Aitken (50–100 nm) and 0.32–0.43 for accumulation mode particles (100–200 nm). The campaign average value of κ = 0.3 is similar to the average value of κ for other continental locations. When air masses came from southeasterly directions crossing the Po Valley in Italy, particles were much more hygroscopic (κ ≈ 0.42) due to large sulfate mass fractions. The κ values obtained at S = 0.079 % exhibited a good negative correlation with the organic mass fractions derived from PM1 aerosol mass spectrometer (AMS) measurements. Applying a simple mixing rule the organic and inorganic mass fractions observed by the AMS could be used to reproduce the temporal fluctuations of the hygroscopicity of accumulation mode particles quite well. We show how during a cloud event the aerosol particles were activated as cloud droplets and then removed from the air by precipitation leaving behind only a small amount of accumulation mode particles consisting mainly of weakly CCN-active particles, most likely externally mixed unprocessed soot particles. During the campaign we had the opportunity to directly compare two DMT CCN counters for a certain time. The total CCN concentration (NCCN,tot) obtained by the two instruments at equal supersaturations agreed well for both possible operating modes: detecting NCCN,tot directly by sampling the polydisperse aerosol with the CCNC, or indirectly by combining size-resolved measurements of the activated fraction with parallel measurements of the particle size distribution (e.g., by SMPS). However, some supersaturation setpoints differed between the two CCNCs by as much as 20% after applying the instrument calibrations, which resulted in differences of the corresponding NCCN,tot of up to 50%. This emphasizes that it is extremely important to carefully calibrate the supersaturation of the instrument, especially at low S