Acoustic Birefringence Changes in the Base Metal and Heat Affected Zone of ASTM 1020 Steel under Plastic Deformation and Fatigue

This paper deals with metallographic studies and ultrasonic investigations of acoustic birefringence in the base metal and heat affected zone of welded specimens of ASTM 1020 steel under uniaxial tension and low-cycle fatigue. We examined microstructural changes on the surface using optical microscope. It was found that development of slip bands differs in the base metal and heat affected zone. The ultrasonic pulse echo method was used for the determination of acoustic birefringence and velocities of ultrasonic shear waves. The differences in the change in velocities in the base metal and in heat affected zone were revealed. Acoustic birefringence was found to change monotonously in the base metal under fatigue as well as in the base metal and heat affected zone under uniaxial tension. For heat affected zone, during fatigue, acoustic birefringence was found to change non-monotonously up to cycle ratio of 0.3 and decrease monotonously after cycle ratio of 0.3. Based on the relationship between relative number of loading cycles, or plasticity resource, and acoustic birefringence, ultrasonic techniques were proposed for assessing damage

Optical Properties of Silicon Nanowires Fabricated by Environment-Friendly Chemistry

Silicon nanowires (SiNWs) were fabricated by metal-assisted chemical etching (MACE) where hydrofluoric acid (HF), which is typically used in this method, was changed into ammonium fluoride (NH4F). The structure and optical properties of the obtained SiNWs were investigated in details. The length of the SiNW arrays is about 2 μm for 5 min of etching, and the mean diameter of the SiNWs is between 50 and 200 nm. The formed SiNWs demonstrate a strong decrease of the total reflectance near 5-15 % in the spectral region λ < 1 μm in comparison to crystalline silicon (c-Si) substrate. The interband photoluminescence (PL) and Raman scattering intensities increase strongly for SiNWs in comparison with the corresponding values of the c-Si substrate. These effects can be interpreted as an increase of the excitation intensity of SiNWs due to the strong light scattering and the partial light localization in an inhomogeneous optical medium. Along with the interband PL was also detected the PL of SiNWs in the spectral region of 500-1100 nm with a maximum at 750 nm, which can be explained by the radiative recombination of excitons in small Si nanocrystals at nanowire sidewalls in terms of a quantum confinement model. So SiNWs, which are fabricated by environment-friendly chemistry, have a great potential for use in photovoltaic and photonics applications

C60 fullerenes increase the intensity of rotational movements in non-anesthetized hemiparkinsonic rats

The effect of C60 fullerene aqueous colloid solution (C60FAS) on the intensity of long-lasting (persisting for one hour) rotational movements in non-anesthetized rats was investigated. For this purpose, an experimental hemiparkinsonic animal model was used in the study. Rotational movements in hemiparkinsonic animals were initiated by the intraperitoneal administration of the dopamine receptor agonist apomorphine. It was shown that a preliminary injection of C60FAS (a substance with powerful antioxidant properties) in hemiparkinsonic rats induced distinct changes in animal motor behavior. It was revealed that fullerene-pretreated animals, in comparison with non-pretreated or vehicle-pretreated rats, rotated for 1 h at an approximately identical speed until the end of the experiment, whereas the rotation speed of control rats gradually decreased to 20–30% of the initial value. One can assume that the observed changes in the movement dynamics of the hemiparkinsonic rats after C60FAS pretreatment presumably can be induced by the influence of C60FAS on the dopaminergic system, although the isolated potentiation of the action of apomorphine C60FAS cannot be excluded. Nevertheless, earlier data on the action of C60FAS on muscle dynamics has suggested that C60FAS can activate a protective action of the antioxidant system in response to long-lasting muscular activity and that the antioxidant system in turn may directly decrease fatigue-related changes during long-lasting muscular activity

C60 fullerenes diminish muscle fatigue in rats comparable to N-acetylcysteine or β-Alanine

The aim of this study is to detect the effects of C60 fullerenes, which possess pronounced antioxidant properties, in comparison with the actions of the known exogenous antioxidants N-acetylcysteine (NAC) and β-Alanine in terms of exercise tolerance and contractile property changes of the m. triceps surae (TS) during development of the muscle fatigue in rats. The electrical stimulation of the TS muscle during four 30 min series in control rats led to total reduction of the muscle contraction force. Furthermore, the effects of prior intraperitoneal (i.p.) or oral C60FAS application and preliminary i.p. injection of NAC or β-Alanine on muscle contraction force under fatigue development conditions is studied. In contrast to control rats, animals with C60FAS, NAC, or β-Alanine administration could maintain a constant level of muscle effort over five stimulation series. The accumulation of secondary products and changes in antioxidant levels in the muscle tissues were also determined after the fatigue tests. The increased levels of lactic acid, thiobarbituric acid reactive substances and H2O2 after stimulation were statistically significant with respect to intact muscles. In the working muscle, there was a significant (p < 0.05) increase in the activity of endogenous antioxidants: reduced glutathione, catalase, glutathione peroxidase, and superoxide dismutase. Treated animal groups showed a decrease in endogenous antioxidant activity relative to the fatigue-induced animals (P < 0.05). Oral C60FAS administration clearly demonstrated an action on skeletal muscle fatigue development similar to the effects of i.p. injections of the exogenous antioxidants NAC or β-Alanine. This creates opportunities to oral use of C60FAS as a potential therapeutic agent. Due to the membranotropic activity of C60 fullerenes, non-toxic C60FAS has a more pronounced effect on the prooxidant-antioxidant homeostasis of muscle tissues in rats

Neutrino Physics with JUNO

The Jiangmen Underground Neutrino Observatory (JUNO), a 20 kton multi-purposeunderground liquid scintillator detector, was proposed with the determinationof the neutrino mass hierarchy as a primary physics goal. It is also capable ofobserving neutrinos from terrestrial and extra-terrestrial sources, includingsupernova burst neutrinos, diffuse supernova neutrino background, geoneutrinos,atmospheric neutrinos, solar neutrinos, as well as exotic searches such asnucleon decays, dark matter, sterile neutrinos, etc. We present the physicsmotivations and the anticipated performance of the JUNO detector for variousproposed measurements. By detecting reactor antineutrinos from two power plantsat 53-km distance, JUNO will determine the neutrino mass hierarchy at a 3-4sigma significance with six years of running. The measurement of antineutrinospectrum will also lead to the precise determination of three out of the sixoscillation parameters to an accuracy of better than 1\%. Neutrino burst from atypical core-collapse supernova at 10 kpc would lead to ~5000inverse-beta-decay events and ~2000 all-flavor neutrino-proton elasticscattering events in JUNO. Detection of DSNB would provide valuable informationon the cosmic star-formation rate and the average core-collapsed neutrinoenergy spectrum. Geo-neutrinos can be detected in JUNO with a rate of ~400events per year, significantly improving the statistics of existing geoneutrinosamples. The JUNO detector is sensitive to several exotic searches, e.g. protondecay via the $p\to K^++\bar\nu$ decay channel. The JUNO detector will providea unique facility to address many outstanding crucial questions in particle andastrophysics. It holds the great potential for further advancing our quest tounderstanding the fundamental properties of neutrinos, one of the buildingblocks of our Universe

Real-time Monitoring for the Next Core-Collapse Supernova in JUNO

Core-collapse supernova (CCSN) is one of the most energetic astrophysical events in the Universe. The early and prompt detection of neutrinos before (pre-SN) and during the SN burst is a unique opportunity to realize the multi-messenger observation of the CCSN events. In this work, we describe the monitoring concept and present the sensitivity of the system to the pre-SN and SN neutrinos at the Jiangmen Underground Neutrino Observatory (JUNO), which is a 20 kton liquid scintillator detector under construction in South China. The real-time monitoring system is designed with both the prompt monitors on the electronic board and online monitors at the data acquisition stage, in order to ensure both the alert speed and alert coverage of progenitor stars. By assuming a false alert rate of 1 per year, this monitoring system can be sensitive to the pre-SN neutrinos up to the distance of about 1.6 (0.9) kpc and SN neutrinos up to about 370 (360) kpc for a progenitor mass of 30$M_{\odot}$ for the case of normal (inverted) mass ordering. The pointing ability of the CCSN is evaluated by using the accumulated event anisotropy of the inverse beta decay interactions from pre-SN or SN neutrinos, which, along with the early alert, can play important roles for the followup multi-messenger observations of the next Galactic or nearby extragalactic CCSN.Comment: 24 pages, 9 figure

Potential of Core-Collapse Supernova Neutrino Detection at JUNO

JUNO is an underground neutrino observatory under construction in Jiangmen, China. It uses 20kton liquid scintillator as target, which enables it to detect supernova burst neutrinos of a large statistics for the next galactic core-collapse supernova (CCSN) and also pre-supernova neutrinos from the nearby CCSN progenitors. All flavors of supernova burst neutrinos can be detected by JUNO via several interaction channels, including inverse beta decay, elastic scattering on electron and proton, interactions on C12 nuclei, etc. This retains the possibility for JUNO to reconstruct the energy spectra of supernova burst neutrinos of all flavors. The real time monitoring systems based on FPGA and DAQ are under development in JUNO, which allow prompt alert and trigger-less data acquisition of CCSN events. The alert performances of both monitoring systems have been thoroughly studied using simulations. Moreover, once a CCSN is tagged, the system can give fast characterizations, such as directionality and light curve

Detection of the Diffuse Supernova Neutrino Background with JUNO

As an underground multi-purpose neutrino detector with 20 kton liquid scintillator, Jiangmen Underground Neutrino Observatory (JUNO) is competitive with and complementary to the water-Cherenkov detectors on the search for the diffuse supernova neutrino background (DSNB). Typical supernova models predict 2-4 events per year within the optimal observation window in the JUNO detector. The dominant background is from the neutral-current (NC) interaction of atmospheric neutrinos with 12C nuclei, which surpasses the DSNB by more than one order of magnitude. We evaluated the systematic uncertainty of NC background from the spread of a variety of data-driven models and further developed a method to determine NC background within 15\% with {\it{in}} {\it{situ}} measurements after ten years of running. Besides, the NC-like backgrounds can be effectively suppressed by the intrinsic pulse-shape discrimination (PSD) capabilities of liquid scintillators. In this talk, I will present in detail the improvements on NC background uncertainty evaluation, PSD discriminator development, and finally, the potential of DSNB sensitivity in JUNO

Ecological and Economic Prerequisites for the Extraction of Solid Minerals from the Bottom of the Arctic Seas

The world ocean has huge reserves of minerals that are contained directly in the water, as well as on the surface of its bottom and in its subsoils. The deposits of solid minerals on the surface of the bottom of the World Ocean are considered the most promising for industrial extraction. The deposits of ferromanganese nodules, cobalt-manganese crusts and polymetallic sulphides are considered as an object of extracting more often than others. There are the largest deposits of ferromanganese nodules in the central and southern parts of the Pacific Ocean, in the central part of the Indian Ocean, and in the seas of the Arctic Ocean near Russia. The deposits of ferromanganese nodules are a serious alternative to deposits of manganese ore on land. However, there are many factors influencing the efficiency of the development of ferromanganese deposits, the most significant are: the content of the useful component in the ore, the depth of the bottom and the distance from the seaports. It is also necessary to take into account the possible environmental consequences of underwater mining

INVESTIGATION, DEVELOPMENT AND INTRODUCTION OF MANGANESE-ZINC FERRITE TECHNOLOGY WITH USE NEW RAW MATERIAL COMPONENTS AND PRODUCTION WASTE

The aim is to develop the technology and to investigate the properties of the manganese-zinc ferrites manufactured with use of the new raw material components and production waste. The specific surface of ferrite powders was determined according to the Bronauer-Emit-Taylor isotherm on the gas chromatograph LKhM-8MD, the X-ray-phase analysis was performed on the diffractometer DRON-2, but the microstructural analysis - on the microscope MIM-7 and scanning electronic microscope STEREOSCAN-150. The basic correlative relations &quot;nature of raw material components - technology - properties of ferrites&quot; have been revealed; the regularities of cleaning iron oxide for ferrites manufactured of the developed pickling solutions by means of use of the firstly synthesized cation flocculants and also new class of the chemical compounds - non-stoichiometric polyelectrolyte complexes have been determined. The technology for economical and ecological utilization of the developed pickling solutions for a purpose of making iron oxide for ferrites of them, technology for processing and use of the industrial production waste of Mn-Zn-ferrite articles and also the new ferrite suspension diluent containing the polyelectrolytes have been developed. The processing technology of the Mn-Zn-ferrite production waste, new composition of the ferrite suspension diluent and also the utilization technology of developed pickling solutions for the manufacture of iron oxide for the ferrites have been introducedAvailable from VNTIC / VNTIC - Scientific & Technical Information Centre of RussiaSIGLERURussian Federatio