Effect of anodization on the surface characteristics and electrochemical behaviour of zirconium in artificial saliva

The paper is focused on elaboration of ZrO2 films on pure zirconium via anodizing inphosphoric acid with and without fluoride at constant potentials of 30 V and 60 V. Thestructure and composition of the films were investigated using scanning electronicmicroscopy, Raman spectroscopy and X-ray photoelectron spectroscopy. The composition ofthe oxides formed at both potentials can be identified as monoclinic ZrO2. In addition to Zrand O, the layers formed in phosphoric acid contain phosphorus originating from thephosphoric acid. When the phosphoric acid solution contains NaF, fluorine is alsoincorporated into the oxide layer. The oxides formed at a higher voltage have greaterroughness than those formed at 30 V. Anodized samples exhibit smaller current densitiesduring anodic polarization compared to the as-received zirconium covered with native oxide.Fil: Romonti, Daniela E.. Faculty of Applied Chemistry and Materials Science; RumaniaFil: Gomez Sanchez, Andrea Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Milošev, Ingrid. Jožef Stefan Institute; EsloveniaFil: Demetrescu, Ioana. Faculty of Applied Chemistry and Materials Science; RumaniaFil: Ceré, Silvia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Effect of surface modification on the corrosion resistance of Zr 2.5Nb as material for permanent implants

Zirconium is a potential material for permanent implants. In particular, surface modification induced by anodisation has proved to be effective to improve corrosion resistance while keeping good osseointegration. The combination of zirconium with niobium is supposed to develop a structure that presents a high corrosion resistance and continues having the mechanical resistance necessary for implants. The aim of the present work is to determine the viability of using anodised Zr-2.5Nb as implant material, and compare it with pure Zr. Electrochemical tests performed in the anodizing solution and in a simulated biological solution revealed that by anodising the materials a higher corrosion resistance is obtained. The improvement on the corrosion resistance is particularly noticeable in the case of the pure metal after a short period immersed in the simulated biological solution. But, after a long period of immersion, the alloy shows better performance.Fil: Farina, Silvia Beatriz. Universidad Nacional de San Martín; Argentina. Comisión Nacional de Energía Atómica. Gerencia del Área de Energía Nuclear. Unidad de Actividad de Materiales (CAC); ArgentinaFil: Gomez Sanchez, Andrea Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Ceré, Silvia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Structure and dielectric properties of electrochemically grown ZrO2 films

The dielectric properties of electrochemically grown zirconium oxide films by anodisation of zirconium in 1.0 mol dm?3 phosphoric acid solution were investigated in a 3 to 30 V potential range with a view to inducing surface modifications for eventual use in biomedical and electronic applications. The oxide films grown at different potentials were characterised by Atomic Force Microscopy, X-ray photoelectron and Raman spectroscopies; the latter demonstrated the incorporation of phosphate ions into the passive films. Flat band potentials calculated from the Mott-Shottky analysis of the oxides semiconducting properties confirm the bilayer structure of the films. The oxide dielectric permittivity was evaluated from impedance spectroscopy measurements and the film oxide model proposed gave values independent of the oxide growth potentialFil: Gomez Sanchez, Andrea Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Katunar, Maria Rosa. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Schreiner, Wido. Universidade Federal do Paraná. Departamento de Física; BrasilFil: Duffo, Gustavo Sergio. Comision Nacional de Energia Atomica. Gerencia D/area de Energia Nuclear. Unidad de Actividad de Materiales (cac); Argentina. Universidad Nacional de San Martín; ArgentinaFil: Cere, Silvia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación en Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Schiffrin, David. University of Liverpool; Reino Unid

Effect of anodized zirconium implants on early osseointegration process in adult rats: a histological and histomorphometric study

Since surface plays a key role in bioactivity, the response of the host to the biomaterial will determine the success or failure of the prosthesis. The purpose of this study is to make an exhaustive analysis of the histological and histochemical characteristics of new bone tissue around Zr implants anodized at 60 V (Zr60) supported by histomorphometric methods in a rat model. Fibrous tissue was observed around the control implants (Zr0) and osteoblasts were identifed on the trabeculae close to the implantation site that showed typical cytological characteristics of active secretory cells, regardless of the surface condition. The histomorphometrical analysis revealed a signifcant increase in cancellous bone volume, trabecular thickness and in trabecular number together with a decrease in trabecular separation facing Zr60. TRAP staining showed that there was a relative increase in the number of osteoclasts for Zr60. In addition, a larger number of osteoclast with a greater number of nuclei were detected in the tibiae for Zr60. This research demonstrated that the new bone microarchitecture in contact with Zr60 is able to improve the early stages of the osseointegration process and consequently the primary stability of implants which is a crucial factor to reduce recovery time for patients.Fil: Tano de la Hoz, María Florencia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Katunar, Maria Rosa. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; ArgentinaFil: Gonzalez, Ariel. Universidad Nacional de Mar del Plata; ArgentinaFil: Gomez Sanchez, Andrea Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Centro de Investigaciones y Transferencia de Villa María. Universidad Nacional de Villa María. Centro de Investigaciones y Transferencia de Villa María; Argentina. Universidad Tecnologica Nacional. Facultad Regional Villa Maria; ArgentinaFil: Díaz, Alcira Ofelia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Marinas y Costeras. Universidad Nacional de Mar del Plata. Facultad de Ciencias Exactas y Naturales. Instituto de Investigaciones Marinas y Costeras; ArgentinaFil: Ceré, Silvia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y Tecnología de Materiales. Universidad Nacional de Mar del Plata. Facultad de Ingeniería. Instituto de Investigaciones en Ciencia y Tecnología de Materiales; Argentin

Can anodised zirconium implants stimulate bone formation? Preliminary study in rat model

Mechanical properties and good biocompatibility of zirconium and some of its alloys focus these materials as good candidates for biomedical applications. The attractive in vivo performance of zirconium is mainly due to the presence of a protective oxide layer. In this preliminary study, surface modification of pure zirconium was made by anodisation in acidic media at low potentials, enhancing the barrier protection given by the oxides and the osseointegration. Electrochemical and SEM (scanning electron microscopy) assays were done in commercially pure zirconium cylinders and two surface conditions were compared: pure and zirconium anodised at 30V. The in vivo assays were held in a tibia rat model. The histological features and fluorochrome labelling changes of newly bone formed around implants were evaluated on the non-decalcified sections 63 days after surgery. Electrochemical and SEM assays showed that anodisation treatment would increased the barrier effect over the material and the in vivo assays showed a continuous newly bone formation around the implant with a different amount of osteocytes in their lacunaes depending the region. There was no significant change in bone thickness around both kinds of implants but conversely a significant increase in the mineralization apposition rate was determined for the anodised condition suggesting that anodisation treatment would stimulate and assist to the osseointegration process. We conclude that anodisation treatment at 30 V can stimulate the implant fixation in a rat model and this study would propose the study of zirconium as candidate material for permanent implant.Fil: Katunar, Maria Rosa. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Gomez Sanchez, Andrea Valeria. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Ballarre, Josefina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; ArgentinaFil: Baca, Matías. Hospital Interzonal General de Agudos ‘‘Oscar Alende’’. Mar del Plata; ArgentinaFil: Vottola, Carlos. Hospital Interzonal General de Agudos ‘‘Oscar Alende’’; ArgentinaFil: Orellano, Juan C.. Hospital Interzonal General de Agudos ‘‘Oscar Alende’’. Mar del Plata; ArgentinaFil: Schell, Hanna. Universitatsmedizin Berlin; AlemaniaFil: Duffo, Gustavo Sergio. Comision Nacional de Energia Atomica. Gerencia D/area de Energia Nuclear. Unidad de Actividad de Materiales (cac); Argentina. Universidad Nacional de San Martín; ArgentinaFil: Cere, Silvia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Mar del Plata. Instituto de Investigación En Ciencia y Tecnología de Materiales (i); Argentina. Universidad Nacional de Mar del Plata. Facultad de Ingeniería; Argentin

Dispositivos lingüísticos de acogida, aprendizaje expansivo e interculturalidad: Contribuciones para la inclusión educativa de estudiantes extranjeros

Indexación: Scopus.In the context of the progressive increase of foreigners in public schools in Chile and the recent changes in migratory patterns, the presence of students who do not master the working language of the educational system has systematically incremented in recent years. In a scenario marked by the absence of educational policies that respond to this new linguistic diversity, the purpose of our research was to understand how schools have responded to the arrival of foreign students and what educational practices they have implemented to tackle this challenge. Through a two-year school ethnography in four public schools with high enrollment of foreigners, institutional documents were analyzed and field observation, interviews and focus groups were conducted with different actors amidst the educational communities. Through an analysis of thematic content, the results reveal the implementation of ten devices to manage educational responses to foreign students. We have analyzed three of these devices with a focus on linguistics based on the tensions and contradictions that occur within the educational institutions of which they are part, identifying significant elements and dimensions to drive forward expansive learning. Finally, we discuss these findings in light of the advances and challenges of the intercultural approach in our Latin American region.https://www.scielo.br/j/ep/a/NhL67jbv7H7VpZtQYjtHVFt/?lang=e

ECMO for COVID-19 patients in Europe and Israel

Since March 15th, 2020, 177 centres from Europe and Israel have joined the study, routinely reporting on the ECMO support they provide to COVID-19 patients. The mean annual number of cases treated with ECMO in the participating centres before the pandemic (2019) was 55. The number of COVID-19 patients has increased rapidly each week reaching 1531 treated patients as of September 14th. The greatest number of cases has been reported from France (n = 385), UK (n = 193), Germany (n = 176), Spain (n = 166), and Italy (n = 136) .The mean age of treated patients was 52.6 years (range 16–80), 79% were male. The ECMO configuration used was VV in 91% of cases, VA in 5% and other in 4%. The mean PaO2 before ECMO implantation was 65 mmHg. The mean duration of ECMO support thus far has been 18 days and the mean ICU length of stay of these patients was 33 days. As of the 14th September, overall 841 patients have been weaned from ECMO support, 601 died during ECMO support, 71 died after withdrawal of ECMO, 79 are still receiving ECMO support and for 10 patients status n.a. . Our preliminary data suggest that patients placed on ECMO with severe refractory respiratory or cardiac failure secondary to COVID-19 have a reasonable (55%) chance of survival. Further extensive data analysis is expected to provide invaluable information on the demographics, severity of illness, indications and different ECMO management strategies in these patients

Burnout among surgeons before and during the SARS-CoV-2 pandemic: an international survey

Background: SARS-CoV-2 pandemic has had many significant impacts within the surgical realm, and surgeons have been obligated to reconsider almost every aspect of daily clinical practice. Methods: This is a cross-sectional study reported in compliance with the CHERRIES guidelines and conducted through an online platform from June 14th to July 15th, 2020. The primary outcome was the burden of burnout during the pandemic indicated by the validated Shirom-Melamed Burnout Measure. Results: Nine hundred fifty-four surgeons completed the survey. The median length of practice was 10 years; 78.2% included were male with a median age of 37 years old, 39.5% were consultants, 68.9% were general surgeons, and 55.7% were affiliated with an academic institution. Overall, there was a significant increase in the mean burnout score during the pandemic; longer years of practice and older age were significantly associated with less burnout. There were significant reductions in the median number of outpatient visits, operated cases, on-call hours, emergency visits, and research work, so, 48.2% of respondents felt that the training resources were insufficient. The majority (81.3%) of respondents reported that their hospitals were included in the management of COVID-19, 66.5% felt their roles had been minimized; 41% were asked to assist in non-surgical medical practices, and 37.6% of respondents were included in COVID-19 management. Conclusions: There was a significant burnout among trainees. Almost all aspects of clinical and research activities were affected with a significant reduction in the volume of research, outpatient clinic visits, surgical procedures, on-call hours, and emergency cases hindering the training. Trial registration: The study was registered on clicaltrials.gov "NCT04433286" on 16/06/2020

Hyperoxemia and excess oxygen use in early acute respiratory distress syndrome : Insights from the LUNG SAFE study

Publisher Copyright: © 2020 The Author(s). Copyright: Copyright 2020 Elsevier B.V., All rights reserved.Background: Concerns exist regarding the prevalence and impact of unnecessary oxygen use in patients with acute respiratory distress syndrome (ARDS). We examined this issue in patients with ARDS enrolled in the Large observational study to UNderstand the Global impact of Severe Acute respiratory FailurE (LUNG SAFE) study. Methods: In this secondary analysis of the LUNG SAFE study, we wished to determine the prevalence and the outcomes associated with hyperoxemia on day 1, sustained hyperoxemia, and excessive oxygen use in patients with early ARDS. Patients who fulfilled criteria of ARDS on day 1 and day 2 of acute hypoxemic respiratory failure were categorized based on the presence of hyperoxemia (PaO2 > 100 mmHg) on day 1, sustained (i.e., present on day 1 and day 2) hyperoxemia, or excessive oxygen use (FIO2 ≥ 0.60 during hyperoxemia). Results: Of 2005 patients that met the inclusion criteria, 131 (6.5%) were hypoxemic (PaO2 < 55 mmHg), 607 (30%) had hyperoxemia on day 1, and 250 (12%) had sustained hyperoxemia. Excess FIO2 use occurred in 400 (66%) out of 607 patients with hyperoxemia. Excess FIO2 use decreased from day 1 to day 2 of ARDS, with most hyperoxemic patients on day 2 receiving relatively low FIO2. Multivariate analyses found no independent relationship between day 1 hyperoxemia, sustained hyperoxemia, or excess FIO2 use and adverse clinical outcomes. Mortality was 42% in patients with excess FIO2 use, compared to 39% in a propensity-matched sample of normoxemic (PaO2 55-100 mmHg) patients (P = 0.47). Conclusions: Hyperoxemia and excess oxygen use are both prevalent in early ARDS but are most often non-sustained. No relationship was found between hyperoxemia or excessive oxygen use and patient outcome in this cohort. Trial registration: LUNG-SAFE is registered with ClinicalTrials.gov, NCT02010073publishersversionPeer reviewe