Evaluation of Effective Composite Biosorbents Based on Wood Sawdust and Natural Clay for Heavy Metals Removal from Water

Bentonitic clay and wood sawdust are natural materials widely available in nature at low cost with high heavy metals sorption properties that, in this work, were combined to achieve an effective composite biosorbent with high sorption properties and enhanced mechanical stability. Pine, aspen, and birch wood sawdust, as well as different bentonite clays and different sawdust modification methods (H3PO4 or HCl) were used for preparing new composite biosorbents. A mixture of wood sawdust and bentonite in a ratio of 2:1 was used. All materials were characterized by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscope (SEM) methods and tested for Cu and Ni ions removal from water. The adsorption process for all composite biosorbents was well described from a pseudo-second order kinetic model (R-2 > 0.9999) with a very high initial adsorption rate of Cu and Ni ions and a maximum uptake recorded within 2 h. The results have shown that the adsorption capacity depends mainly on the kind of wood and the acid treatment of the wood that enhances the adsorption capacity. At a concentration of 50 mg/L, the biosorbent prepared using birch wood sawdust showed the worst performance, removing barely 30% of Cu and Ni ions, while aspen wood sawdust improved the adsorption of Cu (88.6%) and Ni (52.4%) ions. Finally, composite biosorbent with pine wood sawdust showed the best adsorption be haviour with an efficiency removal of 98.2 and 96.3% of Cu and Ni ions, respectively, making it a good candidate as an inexpensive and effective biosorbent for the removal of heavy metals

Rectification in supramolecular zinc porphyrin/fulleropyrrolidine dyads self-organized on gold(111).

Self-assembled donor/acceptor dyads are of current interest as they are biomimetic to the natural photosynthetic conversion system. Herein, we present an ultrahigh-vacuum scanning tunneling microscopy and scanning tunneling spectroscopy (UHV-STM/STS) study of ex situ self-assembled supramolecular dyads consisting of fulleropyrrolidines (PyC 2 C 60 ) axially ligated to zinc(II) tetraphenylporphyrin (ZnTPP), self organized on a 4-aminothiophenol (4-ATP) self-assembled monolayer on gold-(111). These dyads show both bias-polarity-dependent apparent height in STM images and highly rectifying behavior in tunneling spectroscopy. First-principles density functional theory calculations clarify the conformational and electronic properties of the 4-ATP/ZnTPP/PyC 2 C 60 system. Interestingly, we find easier tunneling for electrons moving from the acceptor side of the dyads to the donor side, in the inverse-rectifying sense with respect to previously reported molecular rectifiers. Such behavior cannot be explained as an elastic resonant tunneling process, but it can by using a model based on the Aviram-Ratner mechanism

Zinc Porphyrin‐Driven Assembly of Gold Nanofingers

Nanofingers of gold covered by porphyrins are prepared by a combination of atomic manipulation and surface self-organization. A submonolayer of zinc(II) 5,10,15,20-tetrakis(4-tert-butylphenyl)-porphyrin (ZnTBPP) axially ligated to a self-assembled monolayer of 4-aminothiophenol (4-ATP) on Au(111) is prepared and studied using a combination of ultrahigh vacuum techniques. Under the electric field produced by the STM tip, the relatively weakly bound Au surface atoms along the discommensuration lines become mobile due to the strong bond to 4-ATP, while the tendency of the porphyrins towards self-assembly result in a collective motion of gold clusters. The clusters diffuse onto the surface following well-defined pathways along the [112] direction and then reach the step edges where they assembled, thus forming nanofingers. First-principles density functional theory calculations demonstrate the reduction of the binding energies between the surface gold clusters and the substrate induced by adsorption of thiols. Scanning tunneling microscopy images show assemblies across three adjacent discommensuration lines of the Au(111)-(22 x square root 3) reconstruction, which collectively diffuse along these lines to form islands nucleated at step edges

Synthesis of Molecularly Imprinted Polymers for Amino Acid Derivates by Using Different Functional Monomers

Fmoc-3-nitrotyrosine (Fmoc-3-NT) molecularly imprinted polymers (MIPs) were synthesized to understand the influence of several functional monomers on the efficiency of the molecular imprinting process. Acidic, neutral and basic functional monomers, such as acrylic acid (AA), methacrylic acid (MAA), methacrylamide (MAM), 2-vinylpyridine (2-VP), 4-vinylpyridine (4-VP), have been used to synthesize five different polymers. In this study, the MIPs were tested in batch experiments by UV-visible spectroscopy in order to evaluate their binding properties. The MIP prepared with 2-VP exhibited the highest binding affinity for Fmoc-3NT, for which Scatchard analysis the highest association constant (2.49 × 104 M−1) was obtained. Furthermore, titration experiments of Fmoc-3NT into acetonitrile solutions of 2-VP revealed a stronger bond to the template, such that a total interaction is observed. Non-imprinted polymers as control were prepared and showed no binding affinities for Fmoc-3NT. The results are indicative of the importance of ionic bonds formed between the –OH residues of the template molecule and the pyridinyl groups of the polymer matrix. In conclusion, 2-VP assists to create a cavity which allows better access to the analytes

Molecularly Imprinted Polymers: Present and Future Prospective

Molecular Imprinting Technology (MIT) is a technique to design artificial receptors with a predetermined selectivity and specificity for a given analyte, which can be used as ideal materials in various application fields. Molecularly Imprinted Polymers (MIPs), the polymeric matrices obtained using the imprinting technology, are robust molecular recognition elements able to mimic natural recognition entities, such as antibodies and biological receptors, useful to separate and analyze complicated samples such as biological fluids and environmental samples. The scope of this review is to provide a general overview on MIPs field discussing first general aspects in MIP preparation and then dealing with various application aspects. This review aims to outline the molecularly imprinted process and present a summary of principal application fields of molecularly imprinted polymers, focusing on chemical sensing, separation science, drug delivery and catalysis. Some significant aspects about preparation and application of the molecular imprinting polymers with examples taken from the recent literature will be discussed. Theoretical and experimental parameters for MIPs design in terms of the interaction between template and polymer functionalities will be considered and synthesis methods for the improvement of MIP recognition properties will also be presented

Palladium-Catalyzed Asymmetric Cyclocarbonylation of Allyl Napthols

The asym. cyclocarbonylation reaction of allylnaphthol catalyzed by palladium complexes and chiral phosphine is reported. The reaction was performed under syn-gas conditions at relatively mild exptl. conditions (80-100 °C, 300-600 psi (1 psi = 6.895 kPa)) in CH2Cl2 as the solvent

Novel nickel catalyzed conversion of 2-bromo-1-phenyl-1,3-butadiene to an α-keto lactone. An example of double carbonylation of a halodiene

Ni cyanide and phase transfer-catalyzed carbonylation of PhCH:CBrCH:CH2 gave methylene-α-keto lactone I in good yield; isomerization to a keto butenolide (II) occurs on silica gel. The Ni catalyst was generated by treatment of Ni(CN)2.4H2O with CO and cetyltrimethylammonium bromide in NaOH and PhMe