The thermal imprint of continental breakup during the formation of the South China Sea

This research used data provided by the International Ocean Discovery Program (IODP).We thanks the participants to IODP Expedition 367-368 as well as the captains and crew of the Joides Resolution. Seismic sections originate from the IODP Expedition 367/368/368X proceeding volume. Platte River Associates, Inc is thanked for providing an academic licence of BasinMod 2D. We acknowledge IODP France and ECORD for the support. Funding for this research was provided by Total SA R&D (J.N. Ferry). SAB gratefully acknowledges NERC award NE/R002576/1; Measuring Rates of Weathered Petroleum Accumulation, South China Sea.Peer reviewedPublisher PD

Extensional vs contractional Cenozoic deformation in Ibiza (Balearic Promontory, Spain): Integration in the West Mediterranean back-arc setting

Based on field work and seismic reflection data, we investigate the Cenozoic tectono-sedimentary evolution offshore and onshore Ibiza allowing the proposal of a new tectonic agenda for the region and its integration in the geodynamic history of the West Mediterranean. The late Oligocene-early Miocene rifting event, which characterizes the Valencia Trough and the Algerian Basin, located north and south of the study area respectively, is also present in Ibiza and particularly well-expressed in the northern part of the island. Among these two rifted basins initiated in the frame of the European Cenozoic Rift System, the Valencia Trough failed rapidly while the Algerian Basin evolved after as a back-arc basin related to the subduction of the Alpine-Maghrebian Tethys. The subsequent middle Miocene compressional deformation was localized by the previous extensional faults, which were either inverted or passively translated depending on their initial orientation. Despite the lateral continuity between the External Betics and the Balearic Promontory, it appears from restored maps that this tectonic event cannot be directly related to the Betic orogen, but results from compressive stresses transmitted through the Algerian Basin. A still active back-arc asthenospheric rise likely explains the stiff behavior of this basin, which has remained poorly deformed up to recent time. During the late Miocene a new extensional episode reworked the southern part of the Balearic Promontory. It is suggested that this extensional deformation developed in a trans-tensional context related to the westward translation of the Alboran Domain and the coeval right-lateral strike-slip movement along the Emile Baudot Escarpment bounding the Algerian Basin to the north. (C) 2016 Elsevier B.V. All rights reserved

Extreme Mesozoic crustal thinning in the Eastern Iberia margin: The example of the Columbrets Basin (Valencia Trough)

Eastern Iberia preserves a complex succession of Mesozoic rifts partly or completely inverted during the Late Cretaceous and Cenozoic in relation with Africa-Eurasia convergence. Notably, the Valencia Trough, classically viewed as part of the Cenozoic West Mediterranean basins, preserves in its southwestern part a thick Mesozoic succession (locally ≈10 km thick) over a highly thinned continental basement (locally only ≈3.5 km thick). This subbasin, referred to as the Columbrets Basin, represents a Late Jurassic-Early Cretaceous hyperextended rift basin weakly overprinted by subsequent events. Its initial configuration is well preserved allowing us to unravel its 3-D architecture and tectonostratigraphic evolution in the frame of the Mesozoic evolution of eastern Iberia. The Columbrets Basin benefits from an extensive data set combining high-resolution seismic reflection profiles, drill holes, seismic refraction data, and expanding spread profiles. The interactions between halokinesis, involving the Upper Triassic salt, and extensional deformation controlled the architecture of the Mesozoic basin. The thick uppermost Triassic to Cretaceous succession displays a large-scale 'syncline' shape, progressively stretched and dismembered toward the basin borders. We propose that the SE border of the basin is characterized by a large extensional detachment fault acting at crustal scale and interacting locally with the Upper Triassic décollement. This extensional structure accommodates the exhumation of the continental basement and part of the crustal thinning. Eventually, our results highlight the complex interaction between extreme crustal thinning and occurrence of a prerift salt level for the deformation style and tectonostratigraphic evolution of hyperextended rift basins

Thinning mechanisms of heterogeneous continental lithosphere

The mechanisms responsible for the formation of extremely thinned continental crust (<10 km thick) and lithosphere during rifting remains debated. Observations from present-day and fossil passive margins highlight the role of deep-seated deformation, likely controlled by heterogeneities within the continental lithosphere, such as changing lithologies, mechanical anisotropies and inherited structures. We investigate the mechanisms of lithospheric thinning by exploring the role of pre-existing heterogeneities on the architecture and evolution of rifted margins. We estimate pre-rift pressure conditions (P0) vs. depth diagrams of crustal to lithospheric sections, to quantify rift-related modifications on inherited lithostatic pressure gradients. Two field examples from the Alpine Tethys margins in the Eastern and Southern Alps (SE Switzerland and N Italy) were selected to characterize: (1) the pre-rift architecture of the continental lithosphere; (2) the localization of rift-related deformation in distinct portions of the lithosphere; and (3) the interaction between pre-existing heterogeneities of the lithosphere and rift-related structures. These observations are compared with high-resolution, two-dimensional thermo-mechanical numerical models. The design of the models takes into account pre-existing mechanical heterogeneities representing the initial pre-rift architecture of the continental lithosphere. Extensional structures consist of high-angle and low-angle normal faults, anastomosing shear-zones and decoupling horizons. Such structures accommodate the lateral extraction of mechanically stronger levels derived from the middle to lower crust. As a result, the extremely thinned continental crust in Tethyan passive margins represents the juxtaposition and amalgamation of distinct strong levels of the crust separated by major extensional structures identified by sharp pressure gradients. Future work should determine the applicability of these results to other present-day and fossil rifted margins

Shallow-water hydrothermal venting linked to the Palaeocene–Eocene Thermal Maximum

The Palaeocene–Eocene Thermal Maximum (PETM) was a global warming event of 5–6 °C around 56 million years ago caused by input of carbon into the ocean and atmosphere. Hydrothermal venting of greenhouse gases produced in contact aureoles surrounding magmatic intrusions in the North Atlantic Igneous Province have been proposed to play a key role in the PETM carbon-cycle perturbation, but the precise timing, magnitude and climatic impact of such venting remains uncertain. Here we present seismic data and the results of a five-borehole transect sampling the crater of a hydrothermal vent complex in the Northeast Atlantic. Stable carbon isotope stratigraphy and dinoflagellate cyst biostratigraphy reveal a negative carbon isotope excursion coincident with the appearance of the index taxon Apectodinium augustum in the vent crater, firmly tying the infill to the PETM. The shape of the crater and stratified sediments suggests large-scale explosive gas release during the initial phase of vent formation followed by rapid, but largely undisturbed, diatomite-rich infill. Moreover, we show that these vents erupted in very shallow water across the North Atlantic Igneous Province, such that volatile emissions would have entered the atmosphere almost directly without oxidation to CO2 and at the onset of the PETM

Shallow-water hydrothermal venting linked to the Palaeocene–Eocene Thermal Maximum

The Palaeocene–Eocene Thermal Maximum (PETM) was a global warming event of 5–6 °C around 56 million years ago caused by input of carbon into the ocean and atmosphere. Hydrothermal venting of greenhouse gases produced in contact aureoles surrounding magmatic intrusions in the North Atlantic Igneous Province have been proposed to play a key role in the PETM carbon-cycle perturbation, but the precise timing, magnitude and climatic impact of such venting remains uncertain. Here we present seismic data and the results of a five-borehole transect sampling the crater of a hydrothermal vent complex in the Northeast Atlantic. Stable carbon isotope stratigraphy and dinoflagellate cyst biostratigraphy reveal a negative carbon isotope excursion coincident with the appearance of the index taxon Apectodinium augustum in the vent crater, firmly tying the infill to the PETM. The shape of the crater and stratified sediments suggests large-scale explosive gas release during the initial phase of vent formation followed by rapid, but largely undisturbed, diatomite-rich infill. Moreover, we show that these vents erupted in very shallow water across the North Atlantic Igneous Province, such that volatile emissions would have entered the atmosphere almost directly without oxidation to CO2 and at the onset of the PETM

Shallow-water hydrothermal venting linked to the Palaeocene–Eocene Thermal Maximum

The Palaeocene–Eocene Thermal Maximum (PETM) was a global warming event of 5–6 °C around 56 million years ago caused by input of carbon into the ocean and atmosphere. Hydrothermal venting of greenhouse gases produced in contact aureoles surrounding magmatic intrusions in the North Atlantic Igneous Province have been proposed to play a key role in the PETM carbon-cycle perturbation, but the precise timing, magnitude and climatic impact of such venting remains uncertain. Here we present seismic data and the results of a five-borehole transect sampling the crater of a hydrothermal vent complex in the Northeast Atlantic. Stable carbon isotope stratigraphy and dinoflagellate cyst biostratigraphy reveal a negative carbon isotope excursion coincident with the appearance of the index taxon Apectodinium augustum in the vent crater, firmly tying the infill to the PETM. The shape of the crater and stratified sediments suggests large-scale explosive gas release during the initial phase of vent formation followed by rapid, but largely undisturbed, diatomite-rich infill. Moreover, we show that these vents erupted in very shallow water across the North Atlantic Igneous Province, such that volatile emissions would have entered the atmosphere almost directly without oxidation to CO2 and at the onset of the PETM

South China Sea Rifted Margin Testing hypotheses for lithosphere thinning during continental breakup: Drilling at the South China Sea rifted margin

International Ocean Discovery Program Expedition 368 is the second of two consecutive cruises that form the South China Sea Rifted Margin program. Expeditions 367 and 368 share the common key objectives of testing scientific hypotheses of breakup of the northern South China Sea (SCS) margin and comparing its rifting style and history to other nonvolcanic or magma-poor rifted margins. Four primary sites were selected for the overall program: one in the outer margin high (OMH) and three seaward of the OMH on distinct, margin-parallel basement ridges. These three ridges are informally labeled A, B, and C. They are located within the continent-ocean transition (COT) zone ranging from the OMH to the interpreted steady-state oceanic crust (Ridge C) of the SCS. The main scientific objectives include 1. Determining the nature of the basement within crustal units across the COT of the SCS that are critical to constrain style of rifting, 2. Constraining the time interval from initial crustal extension and plate rupture to the initial generation of igneous ocean crust, 3. Constraining vertical crustal movements during breakup, and 4. Examining the nature of igneous activity from rifting to seafloor spreading. In addition, the sediment cores from the drill sites targeting primarily tectonic and basement objectives will provide information on the Cenozoic regional environmental development of the Southeast Asia margin. Expedition 368 was planned to drill at two primary sites (U1501 and U1503) at the OMH and Ridge C, respectively. However, based on drilling results from Expedition 367, Expedition 368 chose to insert an alternate site on Ridge A (Site U1502). In total, the expedition completed operations at four sites (U1501, U1502, U1504, and U1505). Site U1503, however, was not completed beyond casing to 990 m because of mechanical problems with the drilling equipment that limited the expedition from 25 May 2017 to the end of the expedition to operate with a drill string not longer than 3400 m. New alternate Site U1504 proposed during Expedition 367 met this condition. Site U1505 also met the operational constraints of the 3400 m drill string (total) and was an alternate site for the already drilled Site U1501. At Site U1501, we cored to 697.1 m in 9.4 days, with 78.5% recovery. We also drilled ahead for 433.5 m in Hole U1501D and then logged downhole data from 78.3 to 399.3 m. In 19.3 days at Site U1502, we penetrated 1679.0 m, set 723.7 m of casing and cored a total of 576.3 m with 53.5% recovery, and collected downhole log data from 785.3 to 875.3 m and seismic data through the 10¾ inch casing. At Site U1503, we penetrated 995.1 m, setting 991.5 m of 10¾ inch casing, but no cores were taken. At Site U1504, we took 40 rotary core barrel (RCB) cores over two holes. The cored interval between both holes was 277.3 m with 26.8% recovery. An 88.2 m interval was drilled in Hole U1504B. At Site U1505, we cored 668.0 m with 101.1% recovery. Logging data was collected from 80.1 to 341.2 m. Operations at this site covered 6.1 days. Except for Site U1505, we drilled to acoustic basement, which prior to the expedition, except for Site U1501, had been interpreted to be crystalline basement. A total of 6.65 days were lost due to mechanical breakdown or waiting on spare supplies for repair of drilling equipment. At Site U1501 on the OMH, coring ~45 m into the acoustic basement sampled highly lithified sandstone to conglomerate of presumed Mesozoic age overlain by siliciclastic Eocene pre- to synrift sediments of Oligocene age and topped by primarily carbonaceous postrift sediments of early Miocene to Pleistocene age. Site U1502 on Ridge A was cased to 723.7 m. At this site, we recovered 180 m of hydrothermally altered brecciated basalts comprising sheet and pillow lavas below deep-marine sediments of Oligocene to late Miocene age. Coring was not performed within the upper 380 m (~Pliocene-Pleistocene) at Site U1502. At Site U1503 on Ridge C, 991.5 m of casing was installed in preparation for the planned deep drilling to ~1800 m, but no coring was performed due to mechanical failures, and the site was abandoned without further activity. Coring at Site U1504 on the OMH ~45 km east of Site U1501 recovered metamorphic schist to gneiss (greenschist facies) below late Eocene (?) carbonate rocks (partly reef debris) and early Miocene to Pleistocene sediments. At Site U1505, we cored to 480.15 m through Pleistocene to late Oligocene mainly carbonaceous ooze followed at depth by early Oligocene to late Eocene siliciclastic sediments. Efforts were made at every drill site to correlate the core with the seismic data and seismic stratigraphic unconformities interpreted within the Eocene to Plio-Pleistocene sedimentary sequence prior to drilling. The predrilling interpretation of ages of these unconformities was in general confirmed by drilling results. As a result of the constraints on the length of drill string that could be deployed during the later part of Expedition 368, the secondary expedition objectives addressing the environmental history of the SCS and Southeast Asia received more focus than planned because these sites are located in shallower water depths and required less penetration depth. This forced change in emphasis, however, was without fatal consequences for the primary tectonic objectives. The two expeditions together provided solid evidence for a process of breakup that included vigorous synrift magmatism as opposed to the often-favored interpretation of the SCS margin as a magma-starved margin

Unravelling the interaction between tectonic and sedimentary processes during lithospheric thinning in the alpine tethys rifted margins

La compréhension des mécanismes responsables de l'extension lithosphérique est un enjeu majeur pour la caractérisation des processus de la déchirure continentale. En effet, les mécanismes d'extension lithosphérique permettant l'amincissement de la croûte continentale restent méconnus. Les données acquises dans les marges passives actuelles précisent que la phase majeure d'amincissement se produit dans la zone d'étranglement (necking zone) montrant le passage d'une croûte de 30 à 10 km, à la limite entre marge proximale et distale. Le manque de données dans les marges actuelles ne permet pas de répondre avec précision à ces questions. De ce fait l'étude est focalisée sur les nappes Austroalpines de Bernina-Campo-Grosina dans les Alpes. Ces nappes préservent les reliques de la "necking zone" de la marge fossile Adriatique. Les résultats montrent qu au sein de la necking zone : 1) l'amincissement est accommodé par un système couplé de détachements crustaux permettant l'exhumation de croûte supérieure et inférieure 2) les niveaux crustaux intermédiaires sont interprétés comme représentant un découpleur entre la croûte supérieure et inférieure 3) la présence d'une zone d'extraction permet l'omission de la croûte moyenne. L'amincissement crustal résulte donc de l'exhumation et de l'extrusion de croûte moyenne dans la "necking zone" tandis que la marge distale est caractérisée par la juxtaposition de croûte supérieure et inférieure. Enfin le manteau sous-continental sera exhumé le long de détachements coupant la croûte continentale préalablement amincie. Ces résultats permettent par analogie une meilleure compréhension de l'architecture des marges passives actuelles.A long-standing problem in Earth Sciences is to understand how continents break apart to form new oceanic basins. Many of the questions that currently frame ongoing debates about continental break-up are related to the mechanics of extreme lithospheric extension. Observations from many present-day rifted margins revealed that the transition from continental crust that underwent minor thinning in proximal margins to hyper extended crust in distal margins occurs within a necking zone. The low resolution of offshore data makes it difficult to study the structures and processes associated with crustal thinning in present-day systems. We focused our study on the Austroalpine Bernina-Campo-Grosina units exposed in the Alps, which preserve relics of the former necking zone of the Adriatic rifted margin. Within this necking zone, high-strain shear zones responsible for lithospheric thinning can be defined including: 1) a system of conjugate low-angle shear zones/detachment faults active in the brittle upper crust and lower crust 2) mid-crustal decollements decoupling the deformation in the upper and lower crust 3) an extraction shear zone, whose activity resulted in the total excision of the middle crust. These high-strain zones are interpreted to accommodate crustal thinning from 30 to 10 km during Toarcian time. Thinning resulted in exhumation of mid-crustal rocks in the necking zone, while in the distal margin upper and lower crust are juxtaposed and overprinted by late detachment faults that cut across the thinned crust and exhume mantle rocks to the seafloor. These structures can explain the first-order crustal architecture observed at many present-day rifted margins