A model for film-forming with Newtonian and shear-thinning fluids

The formation of a thin film by (i) the slow penetration of a gas bubble into a liquid filled tube, (ii) the withdrawal of a planar substrate from a liquid filled gap, is investigated theoretically for the cases of both Newtonian and shear-thinning liquids; the latter conforming to either a power-law or Ellis model. Formulated as a boundary value problem underpinned by lubrication theory, the analysis gives rise to a system of ordinary differential equations which are solved numerically subject to appropriate boundary conditions. For Newtonian liquids comparison of the predicted residual film thickness for a wide range of capillary number, Ca ∈ (10-4, 10), is made with others obtained using existing expressions, including the classical one of Bretherton, in the region of parameter space over which they apply. In the case of (i), prediction of the behaviour of the residual fluid fraction and gap-to-film thickness ratio, for a Newtonian liquid and one that is shear-thinning and modelled via a power-law, is found to be in particularly good agreement with experimental data for Ca < 0.2. For (ii), both shear-thinning models are utilized and contour plots of residual film thickness generated as a function of Ca and the defining parameters characteristic of each model. © 2009 Elsevier B.V. All rights reserved

Electric fields as a means of controlling thin film flow over topography

This paper was presented at the 2nd Micro and Nano Flows Conference (MNF2009), which was held at Brunel University, West London, UK. The conference was organised by Brunel University and supported by the Institution of Mechanical Engineers, IPEM, the Italian Union of Thermofluid dynamics, the Process Intensification Network, HEXAG - the Heat Exchange Action Group and the Institute of Mathematics and its Applications.Gravity-driven, steady-state flow of a thin liquid film over a substrate containing topography in the presence of a normal electric field is investigated. The liquid is assumed to be a perfect conductor and the air above it an ideal dielectric. The Navier-Stokes equations are solved using a new depth-averaged approximation that is capable of analysing film flows with inertia, with the flow coupled to the electric field via a Maxwell normal stress term that results from the solution of Laplace’s equation for the electric potential above the film. The latter is solved analytically using separation of variables and Fourier series. The coupled solver is used to analyse the interplay between inertia and electric field effects for flow over onedimensional step and trench topographies and to predict the effect of an electric field on three-dimensional Stokes flow over a two-dimensional trench topography. Sample results are given which investigate the magnitude of the electric fields needed to suppress free surface disturbances induced by topography in each of the cases considered.This study is funded by the European Union via Marie Curie Action Contract MEST-CT-2005-020599

Multilayer Modelling of Lubricated Contacts: A New Approach Based on a Potential Field Description

A first integral approach, derived in an analogous fashion to Maxwell’s use of potential fields, is employed to investigate the flow characteristics, with a view to minimising friction, of shear-driven fluid motion between rigid surfaces in parallel alignment as a model for a lubricated joint, whether naturally occurring or engineered replacement. For a viscous bilayer arrangement comprised of immiscible liquids, it is shown how the flow and the shear stress along the separating interface is influenced by the mean thickness of the layers and the ratio of their respective viscosities. Considered in addition, is how the method can be extended for application to the more challenging problem of when one, or both, of the layers is a viscoelastic material

Aerodynamic Drag Reduction of Emergency Response Vehicles

This paper presents the first experimental and computational investigation into the aerodynamics of emergency response vehicles and focusses on reducing the additional drag that results from the customary practice of adding light-bars onto the vehicles’ roofs. A series of wind tunnel experiments demonstrate the significant increase in drag that results from the light bars and show these can be minimized by reducing the flow separation caused by them. Simple potential improvements in the aerodynamic design of the light bars are investigated by combining Computational Fluid Dynamics (CFD) with Design of Experiments and metamodelling methods. An aerofoil-based roof design concept is shown to reduce the overall aerodynamic drag by up to 20% and an analysis of its effect on overall fuel consumption indicates that it offers a significant opportunity for improving the fuel economy and reducing emissions from emergency response vehicles. These benefits are now being realised by the UK’s ambulance service

Preparation, structural characterisation and antibacterial properties of Ga-doped sol-gel phosphate-based glass

A sol-gel preparation of Ga-doped phosphate-based glass with potential application in antimicrobial devices has been developed. Samples of composition (CaO)(0.30)(Na2O)(0.20-x) (Ga2O3) (x) (P2O5)(0.50) where x = 0 and 0.03 were prepared, and the structure and properties of the gallium-doped sample compared with those of the sample containing no gallium. Analysis of the P-31 MAS NMR data demonstrated that addition of gallium to the sol-gel reaction increases the connectivity of the phosphate network at the expense of hydroxyl groups. This premise is supported by the results of the elemental analysis, which showed that the gallium-free sample contains significantly more hydrogen and by FTIR spectroscopy, which revealed a higher concentration of -OH groups in that sample. Ga K-edge extended X-ray absorption fine structure and X-ray absorption near-edge structure data revealed that the gallium ions are coordinated by six oxygen atoms. In agreement with the X-ray absorption data, the high-energy XRD results also suggest that the Ga3+ ions are octahedrally coordinated with respect to oxygen. Antimicrobial studies demonstrated that the sample containing Ga3+ ions had significant activity against Staphylococcus aureus compared to the control

The Neurotropic Parasite Toxoplasma Gondii Increases Dopamine Metabolism

The highly prevalent parasite Toxoplasma gondii manipulates its host's behavior. In infected rodents, the behavioral changes increase the likelihood that the parasite will be transmitted back to its definitive cat host, an essential step in completion of the parasite's life cycle. The mechanism(s) responsible for behavioral changes in the host is unknown but two lines of published evidence suggest that the parasite alters neurotransmitter signal transduction: the disruption of the parasite-induced behavioral changes with medications used to treat psychiatric disease (specifically dopamine antagonists) and identification of a tyrosine hydroxylase encoded in the parasite genome. In this study, infection of mammalian dopaminergic cells with T. gondii enhanced the levels of K+-induced release of dopamine several-fold, with a direct correlation between the number of infected cells and the quantity of dopamine released. Immunostaining brain sections of infected mice with dopamine antibody showed intense staining of encysted parasites. Based on these analyses, T. gondii orchestrates a significant increase in dopamine metabolism in neural cells. Tyrosine hydroxylase, the rate-limiting enzyme for dopamine synthesis, was also found in intracellular tissue cysts in brain tissue with antibodies specific for the parasite-encoded tyrosine hydroxylase. These observations provide a mechanism for parasite-induced behavioral changes. The observed effects on dopamine metabolism could also be relevant in interpreting reports of psychobehavioral changes in toxoplasmosis-infected humans

Formulation, characterisation and flexographic printing of novel Boger fluids to assess the effects of ink elasticity on print uniformity

Model elastic inks were formulated, rheologically characterised in shear and extension, and printed via flexography to assess the impact of ink elasticity on print uniformity. Flexography is a roll-to-roll printing process with great potential in the mass production of printed electronics for which understanding layer uniformity and the influence of rheology is of critical importance. A new set of flexo-printable Boger fluids was formulated by blending polyvinyl alcohol and high molecular weight polyacrylamide to provide inks of varying elasticity. During print trials, the phenomenon of viscous fingering was observed in all prints, with those of the Newtonian ink exhibiting a continuous striping in the printing direction. Increasing elasticity significantly influenced this continuity, disrupting it and leading to a quantifiable decrease in the overall relative size of the printed finger features. As such, ink elasticity was seen to have a profound effect on flexographic printing uniformity, showing the rheological tuning of inks may be a route to obtaining specific printed features

Burden of anemia in patients with osteoarthritis and rheumatoid arthritis in French secondary care

<p>Abstract</p> <p>Background</p> <p>Arthritic disorders can be the cause of hospitalizations, especially among individuals 60 years and older. The objective of this study is to investigate associations between health care resource utilization in arthritis patients with and without concomitant anemia in a secondary care setting in France.</p> <p>Methods</p> <p>This retrospective cohort study utilized data on secondary care activity in 2001 from the Programme de Médicalisation des Systèmes d'Information database. Two cohorts were defined using ICD-10 codes: patients with an arthritis diagnosis with a concomitant diagnosis of anemia; and arthritis patients without anemia. Health care resource utilization for both populations was analyzed separately in public and private hospitals. Study outcomes were compared between the cohorts using standard bivariate and multivariable methods.</p> <p>Results</p> <p>There were 300,865 hospitalizations for patients with arthritis only, and 2,744 for those with concomitant anemia. Over 70% of patients with concomitant anemia were in public hospitals, compared with 53.5% of arthritis-only patients. Arthritis patients without anemia were younger than those with concomitant anemia (mean age 66.7 vs 74.6, public hospitals; 67.1 vs 72.2, private hospitals). Patients with concomitant anemia/arthritis only had a mean length of stay of 11.91 (SD 14.07)/8.04 (SD 9.93) days in public hospitals, and 10.68 (SD 10.16)/9.83 (SD 7.76) days in private hospitals. After adjusting for confounders, the mean (95% CI) additional length of stay for arthritis patients with concomitant anemia, compared with those with arthritis only, was 1.56 (1.14-1.98) days in public and 0.69 (0.22-1.16) days in private hospitals. Costs per hospitalization were €;480 (227-734) greater for arthritis patients with anemia in public hospitals, and €;30 (-113-52) less in private hospitals, than for arthritis-only patients.</p> <p>Conclusions</p> <p>Arthritis patients with concomitant anemia have a longer length of stay, undergo more procedures, and have higher hospitalization costs than nonanemic arthritis patients in public hospitals in France. In private hospitals, concomitant anemia was associated with modest increases in length of stay and number of procedures; however, this did not translate into higher costs. Such evidence of anemia-related health care utilization and costs can be considered as a proxy for the clinical significance of anemia.</p

Prevalence of anaemia in older persons: systematic review

<p>Abstract</p> <p>Background</p> <p>Ageing populations will impact on healthcare provision, especially since extra years are not necessarily spent in good health. It is important to identify and understand the significance of common medical problems in older people. Anaemia may be one such problem. We report on the prevalence of anaemia in cohorts of elderly people in the general population. The presence of anaemia is associated with a worse prognosis for both morbidity and mortality.</p> <p>Methods</p> <p>Electronic searching and reference lists of published reports were used to identify studies that reported on prevalence of anaemia in cohorts of at least 100 individuals predominantly aged 65 years and over living in developed countries, together with criteria used to define anaemia. Studies of anaemia prevalence in specific disease groups or published before 1980 were excluded. Prevalence data for the entire cohort, for men and women separately and for different age bands were extracted.</p> <p>Results</p> <p>Forty-five studies contributed data. Thirty-four studies (n = 85,409) used WHO criteria to define anaemia. The weighted mean prevalence was 17% (3–50%) overall, and 12% (3–25%) in studies based in the community (27, n = 69,975), 47% (31–50%) in nursing homes (3, n = 1481), and 40% (40–72%) in hospital admissions (4, n = 13,953). Anaemia prevalence increased with age, was slightly higher in men than women, and was higher in black people than white. Most individuals classified as anaemic using WHO criteria were only mildly anaemic.</p> <p>Conclusion</p> <p>Anaemia, as defined by WHO criteria, is common in older people living in the community and particularly common in nursing home residents and hospital admissions. Predicted demographic changes underline the need to understand more about anaemia in older people.</p

Meiotic Recombination Intermediates Are Resolved with Minimal Crossover Formation during Return-to-Growth, an Analogue of the Mitotic Cell Cycle

Accurate segregation of homologous chromosomes of different parental origin (homologs) during the first division of meiosis (meiosis I) requires inter-homolog crossovers (COs). These are produced at the end of meiosis I prophase, when recombination intermediates that contain Holliday junctions (joint molecules, JMs) are resolved, predominantly as COs. JM resolution during the mitotic cell cycle is less well understood, mainly due to low levels of inter-homolog JMs. To compare JM resolution during meiosis and the mitotic cell cycle, we used a unique feature of Saccharomyces cerevisiae, return to growth (RTG), where cells undergoing meiosis can be returned to the mitotic cell cycle by a nutritional shift. By performing RTG with ndt80 mutants, which arrest in meiosis I prophase with high levels of interhomolog JMs, we could readily monitor JM resolution during the first cell division of RTG genetically and, for the first time, at the molecular level. In contrast to meiosis, where most JMs resolve as COs, most JMs were resolved during the first 1.5–2 hr after RTG without producing COs. Subsequent resolution of the remaining JMs produced COs, and this CO production required the Mus81/Mms4 structure-selective endonuclease. RTG in sgs1-ΔC795 mutants, which lack the helicase and Holliday junction-binding domains of this BLM homolog, led to a substantial delay in JM resolution; and subsequent JM resolution produced both COs and NCOs. Based on these findings, we suggest that most JMs are resolved during the mitotic cell cycle by dissolution, an Sgs1 helicase-dependent process that produces only NCOs. JMs that escape dissolution are mostly resolved by Mus81/Mms4-dependent cleavage that produces both COs and NCOs in a relatively unbiased manner. Thus, in contrast to meiosis, where JM resolution is heavily biased towards COs, JM resolution during RTG minimizes CO formation, thus maintaining genome integrity and minimizing loss of heterozygosity