16 research outputs found
CFD Analysis of Rotor-Fuselage Aerodynamics based on a Sliding Mesh Algorithm
Rotor-fuselage interaction is central to the design and performance analysis of helicopters. However,
regardless of its significance this problem is not well-studied and few CFD works have so far been
published. In this paper, a method is put forward to allow CFD computations of rotor-fuselage
problems using a sliding mesh to interface the rotor and fuselage regions. A sliding plane forms a
boundary between a CFD mesh around the fuselage and a rotor-fixed CFD mesh which has to be
rotated to account for the motion of the rotor blades. CFD meshes adjacent to a sliding plane do not
necessarily have matching nodes or even the same number of cell-faces. This poses a problem of
interpolation between CFD meshes and, in addition, the employed algorithms should have small CPU
overhead. The properties of this method are assessed and validation results are presented for several
flow case
Counter-Rotating Open Rotor (CROR) : flow physics and simulation
La propulsion par hélices contrarotatives est à l'étude dans le contexte des recherches menées sur la réduction de la consommation et du bruit aéronautiques. Dans un Open Rotor, on cherche notamment à maîtriser la nappe tourbillonnaire issue de l'hélice amont car elle vient impacter l'hélice aval, contribuant majoritairement au bruit rayonné. Des simulations avancées de ce problème seront présentées et discutées sur le plan de la mécanique des fluides et de l'acoustique
Spatially Ordered Matrix of Nanostructured Tin–Tungsten Oxides Nanocomposites Formed by Ionic Layer Deposition for Gas Sensing
The process of layer-by-layer ionic deposition of tin-tungsten oxide films on smooth silicon substrates and nanoporous anodic alumina matrices has been studied. To achieve the film deposition, solutions containing cationic SnF2 or SnCl2 and anionic Na2WO4 or (NH4)2O·WO3 precursors have been used. The effect of the solution compositions on the films deposition rates, morphology, composition, and properties was investigated. Possible mechanisms of tin-tungsten oxide films deposition into the pores and on the surface of anodic alumina are discussed. The electro-physical and gas-sensitive properties of nanostructured SnxWyOz films have been investigated. The prepared nanocomposites exhibit stable semiconductor properties characterized by high resistance and low temperature coefficient of electrical resistance of about 1.6 × 10 −3 K −1. The sensitivity of the SnxWyOz films to 2 and 10 ppm concentrations of ammonia at 523 K was 0.35 and 1.17, respectively.
At concentrations of 1 and 2 ppm of nitrogen dioxide, the sensitivity was 0.48 and 1.4, respectively, at
a temperature of 473 K. At the temperature of 573 K, the sensitivity of 1.3 was obtained for 100 ppm
of ethanol. The prepared nanostructured tin-tungsten oxide films showed promising gas-sensitivity,
which makes them a good candidate for the manufacturing of gas sensors with high sensitivity and
low power consumption
Unsteady Boundary-Layer Transition Measurements and Computations on a Rotating Blade under Cyclic Pitch Conditions
The presented work tackles the lack of experimental investigations of unsteady laminar-turbulent boundary-layer transition on rotor blades at cyclic pitch actuation, which are important for accurate performance predictions of helicopters in forward flight. Unsteady transition positions were measured on the blade suction side of a four-bladed subscale rotor by means of non-intrusive differential infrared thermography (DIT). Experiments were conducted at different rotation rates corresponding to Mach and Reynolds numbers at 75% rotor radius of up to M_75=0.21 and Re_75 =3.3×10^5 and with varying cyclic blade pitch settings. The setup allowed transition to be measured across the outer 54% of the rotor radius. For comparison, transition was also measured using conventional infrared thermography for steady cases with collective pitch settings only. The study is complemented by numerical simulations including boundary-layer transition modeling based on semi-empirical criteria. DIT results reveal the upstream and downstream motion of boundary-layer transition during upstroke and downstroke, a reasonable comparison to experimental results obtained using the already established sigma*c_p method, and noticeable agreement with numerical simulations. The result is the first systematic study of unsteady boundary-layer transition on a rotor suction side by means of DIT including a comparison to numerical computations
Injection simulations of thick composite parts manufactured by the RTM process
International audienc
Heat flux calculation using embedded thermocouple in W-coated CFC tiles in the JET tokamak
Methodes de calcul aerodynamique appliquees aux rotors d'helicopteres a l'ONERA
Communications to : 75th AGARD FDP on aerodynamics and aeroacoustics of rotorcraft, Berlin (Germany), october 10-13, 1994SIGLEAvailable at INIST (FR), Document Supply Service, under shelf-number : 22419, issue : a.1994 n.107 / INIST-CNRS - Institut de l'Information Scientifique et TechniqueFRFranc
Heat loads on poloidal and toroidal edges of castellated plasma-facing components in COMPASS
International audienc