Experimental characterization of the radio channel for systems with large bandwidth and multiple antennas

[SPA] Cada día son necesarias comunicaciones mejores y más eficientes, con mayores anchos de banda y mayores tasas de transferencias de datos. Por un lado los sistemas de múltiples antenas, MIMO, surgieron como una técnica para optimizar el uso de la potencia y el espectro. Por otro lado, los sistemas Ultra-Wideband, UWB, han ganado recientemente el interés de la comunidad científica por su gran ancho de banda combinado con su baja potencia de transmisión. A la hora de diseñar y testear nuevos dispositivos de comunicaciones inalámbricas, es esencial poseer un conocimiento preciso del canal de propagación por el que se propagan dichas señales. Esta tesis, se basa en el modelado del canal de propagación para sistemas de gran ancho de banda y múltiples antenas desde un punto de vista experimental. Primeramente se presentan las mejoras y desarrollos realizados en el ámbito de los sistemas de medida del canal, dado que es necesario disponer de equipos adecuados y precisos para realizar adecuadas medidas del canal. Seguidamente, se analiza el canal MIMO-UWB en interiores. Se realiza un análisis en profundidad de varios parámetros, especialmente parámetros de una antena como las pérdidas de propagación, el factor de polarización cruzada o la dispersión del retardo. Finalmente, la tesis particulariza el análisis del canal en un entorno especial como es el caso de túneles. Se realiza un análisis experimental de parámetros de una antena como multi antena para luego evaluar las prestaciones que pueden brindar varias técnicas de diversidad como es en el dominio de la frecuencia, la polarización, el espacio o el tiempo.[ENG] Wireless communications have become essential in our society [Rappaport, 1996], [Parsons, 2000]. Nowadays, people need to be connected everywhere and at any time, and demand faster and enhanced communications every day. New applications requires higher data rates and, therefore, higher bandwidths. On the one hand, Multiple-Input Multiple-Output (MIMO) systems were proposed as one solution to achieve higher data rates and optimize the use of the spectrum. On the other hand, more recently, systems with an ultra large bandwidth, and particularly Ultra-Wideband (UWB) systems, have gained the interest of the scientific community. Such interest is owing to the extremely high data rates offered and its possible coexistence with existing systems due to the its low transmitted power. However, this improvement in mobile communications involves the development and testing of new wireless communications systems. Precise knowledge of the radio channel is an essential issue to design this new devices and, thus, reach such improvement in wireless communications. In general, the modeling of the radio channel can be undertaken in two main ways: Theoretically, where the channel is characterized by means of simulations and theoretical approaches. - Experimentally, where the radio channel is characterized by means of the analysis of measurements carried out in real scenarios. This thesis is mainly focused on the experimental characterization of the radio channel for systems with large bandwidth and multiple antennas (MIMO). However, characterizing experimentally the MIMO wideband channel implies the availability of adequate and accurate channel sounders.Universidad Politécnica de CartagenaUniversité des Sciences et Technologies de Lille (USTL)Programa de doctorado en Tecnologías de la Información y Comunicacione

Experimental study of MIMO-OFDM transmissions at 94 GHz in indoor environments

Millimeter wave (mm-wave) frequencies have been proposed to achieve high capacity in 5G communications. Although meaningful research on the channel characteristics has been performed in the 28, 38and 60 GHz bands ─in both indoor and short-range scenarios─,only a small number of trials (experiments) have been carried out in other mm-wave bands. The objective of this work is to study the viability and evaluate the performance of the 94 GHz frequency band for MIMO-OFDM transmission in an indoor environment. Starting from a measurement campaign, the performance of MIMO algorithms is studied in terms of throughput for four different antenna configurations.This work was supported in part by the Ministerio de Economía y Competitividad MINECO, Spain under Grant TEC2016-78028-C3-2-P, and in part by the European FEDER funds

Assessing the ecotoxicological effects of long-term contaminated mine soils on plants and earthworms. Relevance of soil (total and available) and body concentrations

The final publication is available at Springer via http://dx.doi.org/10.1007/s10646-014-1262-2The interactions and relevance of the soil (total and available) concentrations, accumulation, and acute toxicity of several essential and non-essential trace elements were investigated to determine their importance in environmental soil assessment. Three plant species (T. aestivum, R. sativum, and V. sativa) and E. fetida were simultaneously exposed for 21 days to long-term contaminated soils collected from the surroundings of an abandoned pyrite mine. The soils presented different levels of As and metals, mainly Zn and Cu, and were tested at different soil concentrations [12.5, 25, 50, and 100 % of contaminated soil/soil (w/w)] to increase the range of total and available soil concentrations necessary for the study. The total concentrations in the soils (of both As and metals) were better predictors of earthworm uptake than were the available concentrations. In plants, the accumulation of metals was related to the available concentrations of Zn and Cu, which could indicate that plants and earthworms.accumulate elements from different pools of soil contaminants. Moreover, Zn and Cu, which are essential elements, showed controlled uptake at low concentrations. The external metal concentrations predicted earthworm mortality, whereas in plants, the effects on growth were correlated to the As and metal contents in the plants. In general, the bioaccumulation factors were lower at higher exposure levels, which implies the existence of auto-regulation in the uptake of both essential and non-essential elements by plants and earthwormsThis work was financed by the Community of Madrid through the EIADES Project (S-2009/AMB/1478) ) and by the Spanish Ministry of Education and Science project CTM2010-21922-C02-0

Comparative effect of the fungicide Prochloraz-Mn on Agaricus bisporus vegetative-mycelium and fruit-body cell walls

Fungicides to control mycopathogens of commercial Agaricus bisporus, a mushroom cultivated for human consumption, are a major field of study, since these chemicals are toxic to both the host and its fungal parasites. The fungicide Prochloraz-Mn, used at its LD50 for A. bisporus, partially inhibited protein biosynthesis in the vegetative mycelial cell walls of this mushroom and caused significant changes in cell-wall polysaccharide structure, as deduced by methylation analysis and gas liquid chromatography-mass spectrometry (GLC-MS). Furthermore, the aggregated mycelial walls showed distinct alterations in their overall chemical composition following the administration of Prochloraz-Mn at the LD50 and the LD50 ×1000. As expected, GLC-MS studies indicated that the latter dose caused more appreciable differences in polysaccharide structure. The decrease in mushroom crop yields obtained from industrial cultures treated with Prochloraz-Mn to control V. fungicola infection depended on the dose of the fungicide employed, whereas fruit-body morphology was only slightly affected at the highest Prochloraz-Mn concentration used. [Int Microbiol 2004; 7(4):277-281

Risk assessment of an abandoned pyrite mine in Spain based on direct toxicity assays

This is the author’s version of a work that was accepted for publication in Science of the Total Environment. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in [SCIENCE OF THE TOTAL ENVIRONMENT 470-471 (2014)] http://dx.doi.org/10.1016/j.scitotenv.2013.09.101This research reports the risk assessment of an abandoned pyrite mine using direct toxicity assays of soil and groundwater samples taken at the site. The toxicity of As and heavy metals from mining soils to soil and aquatic organisms was studied using the Multispecies Soil System (MS-3) in soil columns. Ecotoxicological assessment was performed with soil samples diluted with a control soil at concentrations of 12.5, 25, 50 and 100% test soil/ soil (w/w). In this way, changes in the mobility and bioavailability of soil contaminants due to changes in geochemical soil properties via soil dilution were studied. The toxicity of water samples was tested on algae and Daphnia magna. The assessment of the mining area indicated that the current presence of As and heavy metals at the site may cause injuries to soil and aquatic organisms in the entire research area. Moreover, this investigation demonstrated that changes in geochemical conditions can increase the availability of arsenic and, consequently, the environmental risk of these soils. A good correlation was not found between toxicity parameters and the concentrations of soil contaminants based on total and extracted element concentrations. This finding reinforces the usefulness of direct toxicity assays for evaluating environmental riskThis work has been financed by the Community of Madrid through EIADES Project S-2009/AMB/1478 and by the Spanish Ministry of Education and Science, project CTM-2007-66401-CO2/ TECNO and CTM2010-21922-C02-0

Localization for capsule endoscopy at UWB frequencies using an experimental multilayer phantom

[EN] Localization inside the human body using ultrawideband (UWB) wireless technology is gaining importance in several medical applications such as capsule endoscopy. Performance analysis of RF based localization techniques are mainly conducted through simulations using numerical human models or through experimental measurements using homogeneous phantoms. One of the most common implemented RF localization approaches uses the received signal strength (RSS). However, to the best of our knowledge, no experimental measurements employing multilayer phantoms are currently available in literature. This paper investigates the performance of RSS-based technique for two-dimensional (2D) localization by employing a two-layer experimental phantom-based setup. Preliminary results on the estimation of the in-body antenna coordinates show that RSS-based method can achieve a location accuracy on average of 0.5-1 cm within a certain range of distances between in-body and on-body antenna.This work was supported by the European Union’s H2020:MSCA:ITN program for the ”Wireless In-body Environment Communication- WiBEC” project under the grant agreement no. 675353. This work was also funded by the Programa de Ayudas de Investigación y Desarrollo (PAID-01-16) from Universitat Politècnica de València and by the Ministerio de Economía y Competitividad, Spain (TEC2014-60258-C2-1-R), by the European FEDER funds.Barbi, M.; Pérez Simbor, S.; García Pardo, C.; Andreu Estellés, C.; Cardona Marcet, N. (2018). Localization for capsule endoscopy at UWB frequencies using an experimental multilayer phantom. Institute of Electrical and Electronics Engineers (IEEE). https://doi.org/10.1109/WCNCW.2018.8369015

Dielectric characterization of healthy and malignant colon tissues in the 0.5 18 GHz frequency band

Several reports over the last few decades have shown that the dielectric properties of healthy and malignant tissues of the same body organ usually show different values. However, no intensive dielectric studies of human colon tissue have been performed, despite colon cancer's being one of the most common types of cancer in the world. In order to provide information regarding this matter, a dielectric characterization of healthy and malignant colon tissues is presented. Measurements are performed on ex vivo surgery samples obtained from 20 patients, using an open-ended coaxial probe in the 0.5 18 GHz frequency band. Results show that the dielectric constant of colon cancerous tissue is 8.8% higher than that of healthy tissues (p = 0.002). Besides, conductivity is about 10.6% higher, but in this case measurements do not have statistical significance (p = 0.038). Performing an analysis per patient, the differences in dielectric constant between healthy and malignant tissues appear systematically. Particularized results for specific frequencies (500 MHz, 900 MHz, 2.45 GHz, 5 GHz, 8.5 GHz and 15 GHz) are also reported. The findings have potential application in early-stage cancer detection and diagnosis, and can be useful in developing new tools for hyperthermia treatments as well as creating electromagnetic models of healthy and cancerous tissues.The authors would like to thank the medical staff of the endoscopy unit of Hospital Universitari i Politecnic La Fe for their assistance in the gathering of tissue samples. This work was supported by Ministerio de Economia y Competitividad, Spain (ref. TEC2014-60258-C2-1-R, TEC2014-56469-REDT), by FEDER funds, and by a UPV-IISLaFe action (CEI-2G, 2014).Fornés Leal, A.; García Pardo, C.; Frasson, M.; Pons Beltrán, V.; Cardona Marcet, N. (2016). Dielectric characterization of healthy and malignant colon tissues in the 0.5 18 GHz frequency band. Physics in Medicine and Biology. 61(20):7334-7346. https://doi.org/10.1088/0031-9155/61/20/7334S73347346612

Coexistence of digital terrestrial television and next generation cellular networks in the 700 MHz band

"(c) 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works."With the spectrum liberation obtained by the deployment of digital terrestrial television and the analog TV switch-off, new bands are being assigned to IMT LTE. In the first cellular deployments in the digital dividend at the 800 MHz band, problems emerged due to the interference cellular networks can cause to DTT signals. Possible solutions imply either an inefficient use of the spectrum (increasing the guard band and reducing the number of DTT channels) or a high cost (using anti-LTE filters for DTT receivers). The new spectrum allocated to mobile communications is the 700 MHz band, also known as the second digital dividend. In this new IMT band, the LTE uplink is placed in the lower part of the band. Hence, the ITU-R invited several studies to be performed and reported the results to WRC-15. In this article, we analyze the coexistence problem in the 700 MHz band and evaluate the interference of LTE signals to DTT services. Several coexistence scenarios have been considered, and laboratory tests have been performed to measure interference protection ratios.Fuentes, M.; García Pardo, C.; Garro Crevillen, E.; Gómez Barquero, D.; Cardona Marcet, N. (2014). Coexistence of digital terrestrial television and next generation cellular networks in the 700 MHz band. IEEE Wireless Communications. 21(6):63-69. doi:10.1109/MWC.2014.7000973S636921

Desarrollo e implementación de una aplicación para la gestión de una red de sensores conectada remotamente vía el sistema GSM-GPRS

En este artículo se presenta una aplicación para gestionar integralmente una pequeña red de sensores conectada a un sistema remoto a través de GSM/GPRS. Para lograr dicha conexión, se integraron en un prototipo los diferentes dispositivos hardware necesarios. La aplicación, desarrollada sobre el Sistema de Información Geográfica (GIS) ArcGis 9.2, permite tanto planificar la red desde el punto de vista de cobertura radioeléctrica como visualizar todos los parámetros sensorizados

RadioEarth: herramienta de cálculo de cobertura radioeléctrica para Google Earth

RadioEarth es una herramienta que interacciona con Google Earth y permite realizar simulaciones de coberturas radioeléctricas de sistemas de radiocomunicaciones como GSM, UMTS, TETRA, LMDS, MMDS, Radio digital, TDT, WiFi, etc. utilizando diferentes modelos de propagación