2,558 research outputs found

    Cadmium removal by Anabaena sp. ATCC 33047 immobilized in polyurethane foam

    Get PDF
    The nitrogen-fixing cyanobacterium Anabaena sp. ATCC 33047, which generates substantial amounts of exopolysaccharide, was immobilized by entrapment within the reticulate network of polyurethane foam discs. The immobilized Anabaena sp. system has been investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. The results showed that it was a highly fast process, with 80 % of the adsorption taking place in the first 10 min, reaching full equilibrium in about 50 min. Data analysis indicated that the behaviour of the system accurately fits to a monolayer adsorption model (Langmuir isotherm). The maximal biosorption capacity determined for the immobilized Anabaena sp. system was as high as 162 mg Cd (II) per gram dry biomass. The outstanding properties established for immobilized Anabaena sp. in polyurethane foam underline the relevance of such a system as an alternative to current treatments of variety effluents or wastewater contaminated with cadmium.Peer reviewe

    Analytic estimates and topological properties of the weak stability boundary

    Get PDF
    The weak stability boundary (WSB) is the transition region of the phase space where the change from gravitational escape to ballistic capture occurs. Studies on this complicated region of chaotic motion aim to investigate its unique, fuel saving properties to enlarge the frontiers of low energy transfers. This “fuzzy stability” region is characterized by highly sensitive motion, and any analysis of it has been carried out almost exclusively using numerical methods. On the contrary this paper presents, for the planar circular restricted 3 body problem (PCR3BP), 1) an analytic definition of the WSB which is coherent with the known algorithmic definitions; 2) a precise description of the topology of the WSB; 3) analytic estimates on the “stable region” (nearby the smaller primary) whose boundary is, by definition, the WSB

    Neurobiology of social attachments

    Get PDF
    Many types of social attachments can be observed in nature. We discuss the neurobiology of two types (1) intraspecific (with a partner) and (2) parental (with the offspring). Stimuli related to copulation facilitate the first, whereas pregnancy, parturition and lactation facilitate the second. Both types develop as consequence of cohabitation. These events seem to stimulate similar neural pathways that increase (1) social recognition, (2) motivation, reward; and (3) decrease fear/anxiety. Subregions of the amygdala and cortex facilitate social recognition and also disinhibition to decrease rejection responses. The interrelationship between MeA, BNST, LS may mediate the activation of NAcc via the mPOA to increase motivation and reward. Cortical areas such as the ACC discriminate between stimuli. The interaction between OT and D2-type receptors in NAcc shell facilitates intraspecific attachment, but D1-type appears to facilitate parental attachment. This difference may be important for maternal females to direct their attention, motivation and expression of attachment toward the appropriate target.Cuerpo Académico UV-CA-28 Neurociencias. Grant SEP-CONACYT (167773) to GACA

    Evaluation of a mindfulness-based intervention with and without virtual reality dialectical behavior therapy® mindfulness skills training for the treatment of generalized anxiety disorder in primary care: A pilot study

    Get PDF
    Generalized Anxiety Disorder (GAD) is a very prevalent disorder in primary care (PC). Most patients with GAD never seek treatment, and those who do seek treatment often drop out before completing treatment. Although it is an understudied treatment, Mindfulness-Based Interventions (MBIs) indicate preliminary efficacy for the treatment of GAD symptoms, but many patients with GAD present other associated symptoms (e.g., attention deficits) that complicate the treatment. Virtual Reality DBT® Mindfulness Skills learning has recently been developed to make learning mindfulness easier for patients with emotion dysregulation who have trouble concentrating. Virtual Reality (VR) might serve as a visual guide for practicing mindfulness as it gives patients the illusion of "being there" in the 3D computer generated world. The main goal of this study was to evaluate the effect of two MBIs (a MBI in a group setting alone and the same MBI plus 10 min VR DBT® Mindfulness skills training) to reduce GAD symptoms. A secondary aim was to explore the effect in depression, emotion regulation, mindfulness, and interoceptive awareness. Other exploratory aims regarding the use of VR DBT® Mindfulness skills were also carried out. The sample was composed of 42 patients (roughly half in each group) with GAD attending PC visits. After treatment, both groups of patients showed significant improvements in General Anxiety Disorder measured by the GAD-7 using mixed regression models [MBI alone (B = -5.70; p < 0.001; d = -1.36), MBI+VR DBT® Mindfulness skills (B = -4.38; p < 0.001; d = -1.33)]. Both groups also showed significant improvements in anxiety, depression, difficulties of emotion regulation and several aspects of mindfulness and interoceptive awareness. Patients in the group that received additional 10 min VR DBT Mindfulness Skills training were significantly more adherent to the treatment than those receiving only standard MBI (100% completion rate in MBI + VR vs. 70% completion rate in MBI alone; Fisher = 0.020). Although randomized controlled studies with larger samples are needed, this pilot study shows preliminary effectiveness of MBI to treat GAD, and preliminary evidence that adjunctive VR DBT® Mindfulness Skills may reduce dropouts

    Preparation and characterization of 33-S samples for 33-S(n,alpha)30-Si cross-section measurements at the n_TOF facility at CERN

    Get PDF
    Thin 33S samples for the study of the 33S(n,a)30Si cross-section at the n_TOF facility at CERN were made by thermal evaporation of 33S powder onto a dedicated substrate made of kapton covered with thin layers of copper, chromium and titanium. This method has provided for the first time bare sulfur samples a few centimeters in diameter. The samples have shown an excellent adherence with no mass loss after few years and no sublimation in vacuum at room temperature. The determination of the mass thickness of 33S has been performed by means of Rutherford backscattering spectrometry. The samples have been successfully tested under neutron irradiation.Ministerio de Economía y Competitividad de España-FPA2013-47327- C2-1-R, FPA2014-53290-C2-2-P, FPA2016-77689-C2-1-RJunta de Andalucía-P11-FQM-8229Ministerio de Economía y Empresa de España (Fondos FEDER)-FIS2015-69941-C2-1-PAECC (Asociación Española Contra el Cáncer)-PS16163811POR

    Distributed feedback lasers based on perylenediimide dyes for label-free refractive index sensing

    Get PDF
    The refractive index sensing capabilitity of distributed feedback (DFB) lasers based on highly photostable (under ambient conditions) perylenediimide-based active films, are reported. The sensor bulk sensitivity is determined from changes in the laser emission wavelength upon exposure to different liquids. The role of the active film thickness (hf) on the sensor sensitivity and on the laser parameters is studied. Sensors based on very thin films (hf = 160 nm) show the highest sensitivities, but their laser thresholds are relatively high and their operational durabilities moderate. The use of thicker films (hf = 850 nm) allows reducing the laser threshold and increasing the durability by two orders of magnitude. In this case, a higher sensitivity is achieved when the sensor operates at the wavelength corresponding to the first-order TE1 mode, instead of at the TE0 one. Finally, it is also shown that the inclusion of a high refractive index TiO2 layer on top of the sensor structure improves the sensitivity by around two times.This work was supported by the Spanish Government (MINECO) and the European Community (FEDER) through grant no. MAT-2011–28167-C02. This work was partially funded by the Basque Government within the framework of the Etortek Program (Grant No. IE13-360). M. Morales-Vidal has been partly supported by a MINECO FPI fellowship (no. BES-2009-020747)

    Shrinkage studies and optimization of multiplexed holographic lenses with high diffractive efficiency and wide angular response

    Get PDF
    Today, the advancement of optical systems that can harness clean and renewable energy sources is a major focus for researchers and innovators worldwide. As we strive to create a sustainable future, this challenge has become increasingly critical to our success. Fresnel lenses are widely used as traditional concentrators, but they have a small acceptance angle, and the reflective elements need continuous maintenance of the surface reflectivity. Transmitting Holographic Optical Elements (HOEs) are an alternative to conventional lenses because they are more economical and versatile. Their material is usually a flexible photopolymer so that the optical element can be attached to different types of support, depending on whether one type of handling is required or another, and they tend to have low weight and volume, as well as a simple way of manufacturing. In addition, also provide an extended focusing area which helps to protect solar cells from heating damage. A theoretical and experimental study on the shrinkage of multiplexed holographic lenses (MHL) that were stored in a low-toxicity photopolymer was carried out. To accomplish the study, a K-space tool was used. Furthermore, an optimization analysis of the angular distance between peaks was performed. To determine efficiency, an evaluation of the short-circuit current under solar illumination with varying incident reconstruction angles was done.This research was funded by Universidad de Alicante (UAFPU20-23); Generalitat Valenciana (CIDEXG/2022/60, IDIFEDER/2021/014, PROMETEO/2021/006); Ministerio de Ciencia e Innovación (PID2019-106601RB-I00, PID2021-123124OB-I00)

    Resistin Regulates Pituitary Lipid Metabolism and Inflammation In Vivo and In Vitro

    Get PDF
    The adipokine resistin is an insulin-antagonizing factor that also plays a regulatory role in inflammation, immunity, food intake, and gonadal function and also regulates growth hormone (GH) secretion in rat adenopituitary cells cultures with the adipokine. Although adipose tissue is the primary source of resistin, it is also expressed in other tissues, including the pituitary. The aim of this study is to investigate the possible action of resistin on the lipid metabolism in the pituitary gland in vivo (rats in two different nutritional status, fed and fast, treated with resistin on acute and a chronic way) and in vitro (adenopituitary cell cultures treated with the adipokine). Here, by a combination of in vivo and in vitro experimental models, we demonstrated that central acute and chronic administration of resistin enhance mRNA levels of the lipid metabolic enzymes which participated on lipolysis and moreover inhibiting mRNA levels of the lipid metabolic enzymes involved in lipogenesis. Taken together, our results demonstrate for the first time that resistin has a regulatory role on lipid metabolism in the pituitary gland providing a novel insight in relation to the mechanism by which this adipokine can participate in the integrated control of lipid metabolism.Sara Borrell Postdoctoral program; BFU 2011 and CIBER Obesidad y Nutricion (Instituto de Salud Carlos Tercero (ISCIII), Ministerio de Ciencia e Innovacion). Juan de la Cierva Program (Ministerio de Educacion y Ciencia)S

    Detection and characterization of staphylococcus aureus and methicillin-resistant s. aureus in foods confiscated in EU borders

    Get PDF
    Producción CientíficaThe aim of the study was to evaluate the potential role of the illegal entry of food in UE in the Methicillin-resistant S. aureus (MRSA) spread. We studied the prevalence and characteristics of Staphylococcus aureus and MRSA isolated from foods of animal origin confiscated from passengers on flights from 45 non-EU countries from 2012 to 2015 by the Border Authorities at Bilbao International Airport (Spain) and Vienna International Airport (Austria), as well as foods from open markets close to EU land borders. Of 868 food samples tested (diverse meat samples including antelope, duck, guinea pig, pork, rodents, turkey, dairy products, and eggs), 136 (15.7%) were positive for S. aureus and 26 (3.0%) for MRSA. All MRSA strains were mecA-positive. The prevalence of S. aureus-positive dairy samples among food confiscated at Bilbao International Airport was 64.6%, and this airport also had the highest value (11.8%) for MRSA-positive samples. The predominant sequence type was ST5 (30.8%), followed by ST8, ST1649, ST1, and other lineages were found to a lesser extent (ST7, ST22, ST72, ST97, and ST398). Six isolates tested positive for luk-PVL genes (SCCmec IV subtypes IVc and IVe). Enterotoxin profiling revealed that 19 MRSA strains were enterotoxigenic, harboring one or more se genes. The MRSA isolates positive for luk-PVL genes were not enterotoxigenic, and none of the isolates tested positive for enterotoxin E. We found 14 resistance profiles, and more than 69% of the MRSA isolates were resistant to three or more types of antimicrobial agents. This finding reveals both the wide diversity of the antimicrobial resistance found in the strains and the capacity to resist not only to beta-lactam drugs. One MRSA strain showed unusual characteristics: it was oxacillin-susceptible, harbored SCCmec V, and was positive for sed, seg, and sej but negative for PVL virulence factors. This study shows the presence of enterotoxigenic HA-, CA-, and LA-MRSA in foods illegally entering the EU, and highlights illegal importation of food as route of enterotoxigenic MRSA spread. Uncontrolled entry of food stuffs into the EU can be a relevant neglected route of MRSA dissemination.Séptimo Programa Marco de la UE Proyecto PROMISE (proyecto n. 265877)Ministerio de Economía y Competitividad (AGL2016- 74882-C3-3
    corecore