81 research outputs found

    Novel glass-based membranes for Cu adsorption: From alkali activation to sintering

    Get PDF
    A porous membrane was developed through alkali activation of pharmaceutical boro-aluminosilicate glass powders suspended in diluted NaOH and KOH aqueous solutions (2.5 M). A consolidated porous structure was obtained by the binding of unreacted particles mediated by a surface gel, developed upon drying of the suspensions and their curing at 40 degrees C for 14 days. The binding phase was sufficiently stable to resist immersion in boiling water and in acidic solutions. Copper adsorption tests were carried out under acidic pH, immersing the membranes in a Cu (NO3)2 solution for different periods of time. To determine the effect of surface washing on capture of copper ions, adsorption experiments with washed and unwashed membranes were also carried out, at varying pH. It was determined that the adsorption kinetics follow the pseudosecond-order kinetic model. The main adsorption mechanism observed is the electrostatic interaction between the negative surface charge of the washed membrane and the Cu2+ ions present in solution. An adsorption higher than 60% was observed at pH = 5, while at pH = 2 the efficiency decreased due to the presence of H3O+ ions. To ensure immobilization of copper, the membranes were densified by viscous flow sintering at a moderate temperature (700 degrees C). Leaching tests on membranes demonstrated the efficiency of the process in terms of copper ions immobilization

    Composites with eutectic microstructure by hot pressing of Al2O3–Y2O3 glass microspheres

    Get PDF
    In the work we describe the use of Al2O3–Y2O3 glass microspheres with high alumina contents prepared by flame synthesis as a precursor for materials with binary eutectic microstructure and high hardness. XRD amorphous microspheres with eutectic composition in a pseudobinary system Al2O3–Y3Al5O12 (YAG) were prepared by feeding a crystalline powder precursor of respective composition into methane-oxygen flame. The microspheres with the mean diameter ≈10 μm were hot-pressed in vacuum under various conditions (temperatures 840-1600°C, pressure 30 or 40 MPa, isothermal dwell 0-120 min). Hot pressing at 1600 °C without isothermal dwell yielded fully dense bulk materials with fine two phase microstructure with Al2O3 and YAG phases percolating at submicrometre level and with hardness 15 GPa. Extension of the isothermal dwell resulted in undesirable coarsening of the resulting microstructure

    The preparation of aluminate glass microspheres by synthesis in CH4/O2 flame

    Get PDF

    Engineering of Silicone-based Mixtures for the Digital Light Processing of Åkermanite Scaffolds

    Get PDF
    Abstract Silicones mixed with oxide fillers are interesting precursors for several bioactive glass-ceramics. A key point is represented by the coupling of synthesis and shaping, since highly porous bodies, in form of foams or scaffolds, are first manufactured with silicones in the polymeric state, at low temperature, and later subjected to ceramic transformation. After successful application of direct ink writing, the present study illustrates the tuning of silicone-based mixtures in order to form akermanite (Ca2MgSi2O7) reticulated scaffolds by digital light processing. This implied the selection of commercial silicones, producing stable and homogeneous blends with a photocurable resin and enabling the manufacturing of defect-free printed scaffolds, before and after firing, without fillers. The blends were further refined with the introduction of fillers, followed by firing at 1100 °C, in air. Optimized samples (from H44 resin) and reactive fillers (including up to 4.5 wt.% borax additive), led to crack-free and phase-pure scaffolds with microporous struts

    Glass powders and reactive silicone binder: Interactions and application to additive manufacturing of bioactive glass-ceramic scaffolds

    Get PDF
    A novel concept for the additive manufacturing of three-dimensional glass-ceramic scaffolds, to be used for tissue engineering applications, was based on fine glass powders mixed with a reactive binder, in the form of a commercial silicone. The powders consisted of ‘silica-defective glass’ specifically designed to react, upon firing in air, with the amorphous silica yielded by the binder. By silica incorporation, the glass was intended to reach the composition of an already known CaO[sbnd]Na 2 O[sbnd]B 2 O 3 [sbnd]SiO 2 system. Silica from the binder provided up to 15 wt% of the total silica. With the same overall formulation, silicone-glass powder mixtures led to nearly the same phase assemblage formed by the reference system, crystallizing into wollastonite (CaSiO 3 ) and Ca-borate (CaB 2 O 4 ). Samples from silicone-glass powder mixtures exhibited an excellent shape retention after firing, which was later exploited in highly porous reticulated scaffolds, obtained by means of direct ink writing (DIW).Fil: Elsayed, Hamada. Università di Padova; Italia. National Research Centre; EgiptoFil: Picicco, Martiniano. Provincia de Buenos Aires. Gobernación. Comisión de Investigaciones Científicas. Centro de Tecnología de Recursos Minerales y Cerámica. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Tecnología de Recursos Minerales y Cerámica; ArgentinaFil: Dasan, Arish. Alexander Dubček University of Trenčín; EslovaquiaFil: Kraxner, Jozef. Alexander Dubček University of Trenčín; EslovaquiaFil: Galusek, Dušan. Alexander Dubček University of Trenčín; EslovaquiaFil: Bernardo, Enrico. Università di Padova; Itali

    Influence of Copper-Strontium Co-Doping on Bioactivity, Cytotoxicity and Antibacterial Activity of Mesoporous Bioactive Glass

    Get PDF
    Mesoporous bioactive glass (MBG) is an extensively studied biomaterial used for the healing of bone defects. Its biological applications can be tailored by introducing metallic ions, such as strontium (Sr) and copper (Cu), which can enhance its functionalities, including osteogenetic, angiogenetic and antibacterial functionalities. In this study, Cu and Sr ions were co-doped (ratio 1:1) with x = 0.5, 1 and 2 mol% each in glass with an intended nominal composition of 80SiO2-(15-2x)CaO-5P2O5-xCuO-xSrO and synthesized with an evaporation-induced self-assembly (EISA)-based sol-gel technique. XRD confirmed the amorphous nature of the glass, while compositional analysis using ICP-OES confirmed the presence of dopant ions with the required amounts. A TEM study of the MBG powders showed fringes that corresponded to the formation of a highly ordered mesoporous structure. The Cu-Sr-doped MBG showed a positive effect on apatite formation when immersed in SBF, although the release of Cu and Sr ions was relatively slow for 1 mol% of each co-dopant, which signified a stable network structure in the glass. The impact of the Cu and Sr ions on the osteoblast-like cell line MG-63 was assessed. At the particle concentrations of 1 wt./vol.% or lower, the cell viability was above 50%. An antibacterial test was conducted against Gram-negative E. coli and Gram-positive S. aureus bacteria. With a sequential increase in the co-doped ion content in the glass, the zone of inhibition for bacteria increased. The results suggest that the doping of MBG with Cu and Sr ions at up to 2 mol% can result in tailored sustained release of ions to enhance the applicability of the studied glass as a functional biomaterial for bone regeneration applications.European Union’s Horizon 2020 research and innovation program under grant number 739566VEGA 1/0191/2

    Luminescent Eu3+-doped transparent alumina ceramics with high hardness

    Get PDF
    The Eu3+-doped transparent aluminas were prepared by wet shaping technique followed by pressureless sintering and hot isostatic pressing. The effect of dopant amount on microstructure, real in-line transmission (RIT), photoluminescence (PL) properties, hardness and fracture behaviour was studied. The RIT decreased with increasing amount of the dopant. The PL emission spectra of Al2O3:Eu3+ ceramics exhibited predominant red light emission with the highest intensity (under 394 nm excitation) for material containing 0.125 at.% of Eu3+ and colour coordinates (0.645, 0.355) comparable with commercial red phosphors. The doping resulted in hardness increase from 26.1 GPa for undoped alumina to 27.6 GPa for Eu-doped sample. The study of fracture surfaces showed predominantly intergranular crack propagation micro-mechanism

    Transparent LiOH-doped magnesium aluminate spinel produced by spark plasma sintering: Effects of heating rate and dopant concentration

    Get PDF
    The effects of LiOH doping of magnesium aluminate spinel powders and various Spark Plasma Sintering (SPS) schedules on densification behavior and final transparency of polycrystalline magnesium aluminate spinel were studied. Two commercial magnesium aluminate spinel powders, with different specific surface areas, were doped with up to 0.6 wt% of LiOH and consolidated using SPS with slow (2.75 °C/min) and fast (100 °C/min) heating rates. The slow heating rate was optimal for undoped magnesium aluminate spinel (LiOH-free) with the best real in-line transmittance (RIT) of 84.8% (measured at 633 nm on a disc 0.8 mm thick). For the magnesium aluminate spinel doped with 0.3 wt% of LiOH, the fast heating rate was beneficial, and an RIT of 76.5% was achieved. μ-Raman analysis confirmed that the addition of LiOH suppressed carbon contamination
    corecore