Effect of different functionalized carbon nanostructures as fillers on the physical properties of biocompatible poly( l -lactic acid) composites

Composites of carbon nanostructures (CNSs) and biocompatible polymers are promising materials for a series of advanced technological applications, ranging from biomedicine and bioelectronics to smart packaging and soft robotics. In this work, we present three types of organic-functionalized CNSs, namely p-methoxyphenyl functionalized multi-walled carbon nanotubes, carbon nanohorns and reduced graphene oxide, used as nanofillers for the preparation of homogeneous and well-dispersed composites of poly(L-lactic acid), a biocompatible and biodegradable FDA-approved polymer. A thorough characterization of the composites is given in terms of calorimetric response, electrical and mechanical properties. Significant differences are observed among the different types of CNS nanofillers, underlying the key role played by the nanoscale shape and distribution of the components in driving the macroscopic behavior of the composite material. Surface properties are probed through advanced atomic force microscopy techniques, on both flat substrates (films) and confined systems (nanofibers). All these composites proved to be biocompatible and to support as scaffolds the proliferation of human neuronal precursor cell line SH-SY5Y, opening the route to a future comparative analysis on their ability to boost neuronal differentiation

Quartz fiber calorimetry

The fundamentals of a new electromagnetic and hadronic sampling calorimetry based on the detection of Cherenkov light generated in quartz optical fibers are presented. Optical fibers transport light only in a selected angular range which results in a non-obvious and absolutely unique characteristic for this new technique: showers of very narrow visible energy. In addition, the technique is characterized by radiation resistance measured in Gigarads and nanosecond signal duration. Combined, these properties make quartz fiber calorimetry a very promising technique for high intensity heavy ion experiments and for the high pseudorapidity regions of high intensity collider experiments. The results of beam tests and simulations are used to illustrate the basic properties and peculiar characteristics of this recent development

The ALICE Zero Degree Calorimeters

In the ALICE experiment at Cern LHC, a set of hadron calorimeters will be used to determine the centrality of the Pb-Pb collision. The spectator protons and neutrons, will be separated from the ion beams, using the separator magnet (D1) of the LHC beam optics and respectively detected by a proton (ZP) and a neutron (ZN) "Zero-degree Calorimeter" (ZDC). The detectors will be placed in front of the separator D2 magnet, 115 meters away from the beam intersection point. The ZDCs are quartz-fiber spaghetti calorimeters that exploit the Cherenkov light produced by the shower particles in silica optical fibers.This technique offers the advantages of high radiation hardness (up to several Grad), fast response and reduced lateral dimension of the detectable shower. In addition, quartz-fiber calorimeters are intrinsically insensitive to radio-activation background, which produces particles below the Cherenkov threshold.The ALICE ZDC should have an energy resolution comparable with the intrinsic energy fluctuations, which range from about 20 0.000000or central events to about 5 0.000000or peripheral ones, according to simulations that use HIJING as event generator. The fiber-to-absorber filling ratio must be chosen as a good compromise between the required energy resolution and the fiber cost.The design of the proposed calorimeter will be discussed, together with the expected performances. Whenever possible, the simulated results will be compared with the experimental ones, obtained with the built prototypes and with the NA50 ZDC, which can be considered as a working prototype for the ALICE neutron calorimeter

Zero degree Cherenkov calorimeters for the ALICE experiment

International audienceThe collision centrality in the ALICE experiment will be determined by the Zero Degree Calorimeters (ZDCs) that will measure the spectator nucleons energy in heavy ion collisions. The ZDCs detect the Cherenkov light produced by the fast particles in the shower that cross the quartz fibers, acting as the active material embedded in a dense absorber matrix. Test beam results of the calorimeters are presented

A new measurement of J/psi suppression in Pb-Pb collisions at 158 GeV per nucleon

We present a new measurement of J/psi production in Pb-Pb collisions at 158 GeV/nucleon, from the data sample collected in year 2000 by the NA50 Collaboration, under improved experimental conditions with respect to previous years. With the target system placed in vacuum, the setup was better adapted to study, in particular, the most peripheral nuclear collisions with unprecedented accuracy. The analysis of this data sample shows that the (J/psi)/Drell-Yan cross-sections ratio measured in the most peripheral Pb-Pb interactions is in good agreement with the nuclear absorption pattern extrapolated from the studies of proton-nucleus collisions. Furthermore, this new measurement confirms our previous observation that the (J/psi)/Drell-Yan cross-sections ratio departs from the normal nuclear absorption pattern for semi-central Pb-Pb collisions and that this ratio persistently decreases up to the most central collisions.Comment: 19 pages, 10 figures. Submitted to Eur. Phys. J.

Influence of Temperature and Humidity on Bakelite Resistivity

Presentation made at RPC99 and submitted to Elsevier PreprintThe use of phenolic or melaminic bakelite as RPC electrodes is widespread. The electrode resistivity is an important parameter for the RPC performance. As recent studies have pointed out, the bakelite resistivity changes with temperature and is influenced by humidity. In order to gain a quantitative understanding on the influence of temperature and humidity on RPC electrodes, we assembled an apparatus to measure resistivity in well-controlled conditions. A detailed description of the experimental set-up as well as the first resistivity measurements for various laminates in different environmental conditions are presented

J/psi azimuthal anisotropy relative to the reaction plane in Pb-Pb collisions at 158 GeV per nucleon

The J/$\psi$ azimuthal distribution relative to the reaction plane has been measured by the NA50 experiment in Pb-Pb collisions at 158 GeV/nucleon. Various physical mechanisms related to charmonium dissociation in the medium created in the heavy ion collision are expected to introduce an anisotropy in the azimuthal distribution of the observed J/$\psi$ mesons at SPS energies. Hence, the measurement of J/$\psi$ elliptic anisotropy, quantified by the Fourier coefficient v$_2$ of the J/$\psi$ azimuthal distribution relative to the reaction plane, is an important tool to constrain theoretical models aimed at explaining the anomalous J/$\psi$ suppression observed in Pb-Pb collisions. We present the measured J/$\psi$ yields in different bins of azimuthal angle relative to the reaction plane, as well as the resulting values of the Fourier coefficient v$_{2}$ as a function of the collision centrality and of the J/$\psi$ transverse momentum. The reaction plane has been estimated from the azimuthal distribution of the neutral transverse energy detected in an electromagnetic calorimeter. The analysis has been performed on a data sample of about 100 000 events, distributed in five centrality or p$_{\rm T}$ sub-samples. The extracted v$_{2}$ values are significantly larger than zero for non-central collisions and are seen to increase with p$_{\rm T}$.Comment: proceedings of HP08 conference corrected a typo in one equatio

Bottomonium and Drell-Yan production in p-A collisions at 450 GeV

The NA50 Collaboration has measured heavy-quarkonium production in p-A collisions at 450 GeV incident energy (sqrt(s) = 29.1 GeV). We report here results on the production of the Upsilon states and of high-mass Drell-Yan muon pairs (m > 6 GeV). The cross-section at midrapidity and the A-dependence of the measured yields are determined and compared with the results of other fixed-target experiments and with the available theoretical estimates. Finally, we also address some issues concerning the transverse momentum distributions of the measured dimuons.Comment: 18 pages, 9 figures, to be published in Phys. Lett.

Study of the Resistive Plate Chambers for the ALICE Dimuon Arm

Presentation made at RPC99 and submitted to Elsevier PreprintThe trigger system for the ALICE Dimuon Arm will be based on Resistive Plate Chambers. An RPC prototype, with electrodes made of low resistivity bakelite (rho ~ 3.109 Ωcm) has been tested both at the SPS and at the GIF. The results for operation in streamer mode are presented here