Viscoelastic properties of suspensions of noncolloidal hard spheres in a molten polymer

We report an experimental study on suspensions of solid particles in a viscoelastic polymer matrix. A commercial entangled poly(ε- caprolactone) was used as the suspending fluid. Noncolloidal solid spheres (diameter = 15 μm) made of polymethylmethacrylate were dispersed in the polymer via a solvent casting method. The volume fraction of the spheres was varied from 5% to 30%, thus allowing to explore both dilute and concentrated regimes. Electron scanning microscopy demonstrated homogeneous dispersion of the spheres in the matrix. We measured the rheological properties of the suspensions both in linear and nonlinear regimes with both dynamic and transient tests. The experimental results demonstrate the reinforcement effect of the particles. Both viscous and elastic moduli increase as the concentration of the particles is increased. The results show good agreement with available theories, simulations, and previous experimental data. In particular, the second order parameter of the quadratic equation that describes the dependence of the shear viscosity of the suspension upon the volume fraction of particles is in agreement with the predicted value found by Batchelor [G. K. Batchelor and J. T. Green, “The hydrodynamic interaction of two small freely-moving spheres in a linear flow field,” J. Fluid Mech. 56, 375–400 (1972); G. K. Batchelor and J. T. Green, “The determination of the bulk stress in a suspension of spherical particles to order c2,” J. Fluid Mech. 56, 401–427 (1972); and G. K. Batchelor, “The effect of Brownian motion on the bulk stress in a suspension of spherical particles,” J. Fluid Mech. 83, 97–117 (1977)]. We probe experimentally that the linear rheological behavior of suspensions of particles in viscoelastic fluids is the same as for Newtonian fluids

Improving the Process Ability of Poly (3-Hydroxybutyrate) by a Polyphenolic Natural Additive

The severe environmental issues generated by the non-biodegradability of most polymeric materials has fostered the search for more eco-friendly solutions. Polyhydroxybutyrate (PHB), produced by bacterial cells and easily hydrolyzed is one of appealing choice but its properties are still not competitive with those of standard polymers. Among others, one reason is related to the fact that the high processing temperature (due to the high crystallization point) is responsible for severe thermal degradation. In this paper, the effect of Tannic Acid (TA) as a thermal stabilizing processing agent for HPB is investigated by rheological as well as calorimetric techniques under conditions similar to those used in real processing applications. The results show that TA is effective in improving the thermal stability and processability of PHB, while keeping its biodegradable attitude. Compared to neat PHB, TA containing samples show a lower and delayed thermal degradation. FTIR measurements support the hypothesis that stabilization is determined by TA/PHB crosslinking

A microcapillary rheometer for microliter sized polymer characterization

Abstract We report the design of a microcapillary rheometer (μCR) that allows to perform experiments rapidly and in a broad range of shear rates (i.e., from 0.1 to 1000 s−1), using small amounts of material (i.e., just few milligrams). Additionally, multiple measurement parallelization makes it suitable for High-Throughput Rheological Experimentation of polymer melts (HT-Rheo-E). The novel rheometer consists of a set of three cylindrical microcapillaries in which the fluid flows driven by a controlled pressure. A camera, placed at the capillary exit, records the fluid motion to measure its flow rate, from which the fluid viscosity can be determined. The optimization of the setup allowed for reliable and fast viscosity measurements using ca. 10 mg of material. The current work reports the design of the rheometer and validation measurements on several model fluids. The microfabricated μCR is of potential interest for applications in quality control and research where rapid and repeated measurements using limited milligrams of polymer are required, as well as for High-Throughput-Experimentation of complex fluids (e.g., biological systems)

Colloidal fibers as structurant for worm-like micellar solutions

We investigate the rheological properties of a simplified version of a liquid detergent composed of an aqueous solution of the linear alkylbenzene sulphonate (LAS) surfactant, in which a small amount of fibers made of hydrogenated castor oil (HCO) is dispersed. At the concentration typically used in detergents, LAS is in a worm-like micellar phase exhibiting a Maxwellian behavior. The presence of HCO fibers provides elastic properties, such that the system behaves as a simple Zener body, mechanically characterized by a parallel connection of a spring and a Maxwell element. Despite this apparent independence of the contributions of the fibers and the surfactant medium to the mechanical characteristics of the system, we find that the low frequency modulus increases with increasing LAS concentration. This indicates that LAS induces attractive interactions among the HCO fibers, resulting in the formation of a stress-bearing structure that withstands shear at HCO concentrations, where the HCO fibers in the absence of attractive interactions would not sufficiently overlap to provide stress-bearing properties to the system

Additive Manufactured Scaffolds for Bone Tissue Engineering: Physical Characterization of Thermoplastic Composites with Functional Fillers

Thermoplastic polymer–filler composites are excellent materials for bone tissue engineering (TE) scaffolds, combining the functionality of fillers with suitable load-bearing ability, biodegradability, and additive manufacturing (AM) compatibility of the polymer. Two key determinants of their utility are their rheological behavior in the molten state, determining AM processability and their mechanical load-bearing properties. We report here the characterization of both these physical properties for four bone TE relevant composite formulations with poly(ethylene oxide terephthalate)/poly(butylene terephthalate (PEOT/PBT) as a base polymer, which is often used to fabricate TE scaffolds. The fillers used were reduced graphene oxide (rGO), hydroxyapatite (HA), gentamicin intercalated in zirconium phosphate (ZrP-GTM) and ciprofloxacin intercalated in MgAl layered double hydroxide (MgAl-CFX). The rheological assessment showed that generally the viscous behavior dominated the elastic behavior (G″ > G′) for the studied composites, at empirically determined extrusion temperatures. Coupled rheological–thermal characterization of ZrP-GTM and HA composites showed that the fillers increased the solidification temperatures of the polymer melts during cooling. Both these findings have implications for the required extrusion temperatures and bonding between layers. Mechanical tests showed that the fillers generally not only made the polymer stiffer but more brittle in proportion to the filler fractions. Furthermore, the elastic moduli of scaffolds did not directly correlate with the corresponding bulk material properties, implying composite-specific AM processing effects on the mechanical properties. Finally, we show computational models to predict multimaterial scaffold elastic moduli using measured single material scaffold and bulk moduli. The reported characterizations are essential for assessing the AM processability and ultimately the suitability of the manufactured scaffolds for the envisioned bone regeneration application.The work was supported by a Horizon 2020 Research and Innovation Programme grant from the European Union, called the FAST project (grant no. 685825, project website: http:// project-fast.eu). The authors acknowledge the support of the FAST project consortium for the various aspects of this wor

Investigar en Trabajo Social: diferentes experiencias como pasantes de investigación

El presente trabajo se propone compartir tres experiencias de investigación llevadas a cabo por estudiantes (ahora licenciadas) en la Facultad de Trabajo Social de la Universidad Nacional de La Plata, en diferentes proyectos de investigación. Dos de las experiencias de pasantías se enmarcaron en el proyecto de investigación “Seguridad, Violencia y Derechos Humanos. Un estudio de las representaciones sociales en jóvenes y policías”1. La otra pasantía se inserta en el proyecto “Disputas en el espacio público: cultura, política y desigualdades socio-urbanas”2. A su vez, dos de nosotras continuamos nuestro proceso de aprendizaje del oficio de investigar a través de dos becas CIN en el marco de los proyectos de investigación acreditados, mencionados anteriormente. Haremos una breve mención respecto a esto. Por último, analizaremos las experiencias como pasantes de investigación a la luz de los aportes de distintos autores/as, haciendo hincapié principalmente en la comprensión de las competencias, habilidades y destrezas necesarias para desarrollar la práctica investigativa.Eje Teórico-metodológico en Trabajo Social-GT 27: Metodología y Trabajo Social.Facultad de Trabajo Socia