3,105 research outputs found
Physicochemical and microbiological meat quality, growth performance and carcass characteristics of feedlot-finished cull Santa Inês ewes and Moxotó goats
This study aimed at assessing the physicochemical and microbiological quality of feedlot-finished, culled Santa Inês ewes and Moxotó goats, and compares the intake, weight gain and carcass characteristics. Three Santa Inês ewes and Moxotó goats with similar ages were confined in double and/or individual pens and then euthanized after 40 days of confinement. The average intake, daily weight gain, hot carcass yield, cold carcass yield, weight loss by cooling and rib eye area (94.45%, 0.220 kg/day, 41.37%, 40.14%, 2.99%, 16.1 cm², respectively) of the Santa Inês ewes were higher than that of the Moxotó goats (84.01%; 0.06 kg/day; 41.55%; 39.81%; 4.12%; and 11.35 cm², respectively). The chevon (goat meat) showed higher protein levels (23.09 g/100 g), lower lipid levels (1.43 g/100 g) and higher red-color intensity (11.62), although it had lower tenderness (8.98 kgf shear strength). The superiority of the culled ewes was assessed relative to that of the culled goats, and the results showed that the Santa Inês sheep has better performance than the Moxotó goats. However, mutton and chevon derived from the culled animals are promising alternatives for small farmers because culled meats add value to the standard meat obtained from these animals, broaden sales alternatives and increase profitability.Key words: Performance parameters, physicochemical parameters, microbiological parameters, cull animals
Inclusion of sweet sorghum flour in bread formulations
Sweet sorghum (Sorghum bicolor L. Moench) has been studied as an additional source of raw material for production or partial replacement of foods due to its high fiber concentration. Its consumption is associated with the prevention of some diseases and nutritional benefits. The aim of this study was to evaluate the partial replacement of wheat flour by sweet sorghum flour in bread formulations in order to characterize the nutritional and physical profile of the flour. Four bread formulations were prepared and evaluated for sensory and textural profile. The composition of sweet sorghum flour showed high fiber content and relative protein value, and moisture showed average value, in accordance with limits established by legislation. The addition of 3% sweet sorghum flour to bread was shown to be technically feasible, with great acceptance by consumers, being a nutritious and tasty option.Key words: Functional food, fiber, baking, texture
Physicochemical and microbiological characteristics of Italian salami made of lamb and enriched with pequi (Caryocar brasiliense, Cambess)
The purpose of this study was to evaluate and compare the inclusion of different levels of pequi (Caryocar Brasiliense, Cambess) pulp in the processing of Italian salami made of lamb for the evaluation of their physicochemical and microbiological characteristics. Six formulations of Italian salamis were processed: no pequi pulp (control - treatment 1); 4% pequi pulp (treatment 2); 8% pequi pulp (treatment 3), 12% pequi pulp (Treatment 4), 16% pequi pulp (treatment 5) and 20% pequi pulp (treatment 6). During the maturation period, all Italian salamis made of lamb enriched with pequi presented similar behaviors; and acidity (pH) and water activity (aw) results showed stable end values. For protein, the Italian salami made of lamb without pequi pump presented a higher content. For one of the lowest contents of fat, treatment 3 showed the highest content of humidity. The contents of fat and ashes did not present any significant difference when comparing the Italian salami formulations. A color tending to dark, yellowish and reddish shades was observed in the Italian salamis made of lamb and enriched with pequi. All Italian salamis were microbiologically satisfactory, showing ideal sanitary conditions for consumption. Pequi is a typical fruit from the Brazilian cerrado region, with characteristic color, odor and flavor, and it is an option for inclusion in Italian salamis, but additional studies should be conducted to inspect the sensory acceptability of these products.Keywords: Cerrado fruit, fermented stuffed meat sausages, physicochemical parameters, microbiological parameters
Compression Stockings Used During Two Soccer Matches Improve Perceived Muscle Soreness and High-Intensity Performance.
Gimenes, SV, Marocolo, M, Pavin, LN, Pagoto Spigolon, LM, Neto, OB, Côrrea da Silva, BV, Duffield, R, and Ribeiro da Mota, G. Compression stockings used during two soccer matches improve perceived muscle soreness and high-intensity performance. J Strength Cond Res XX(X): 000-000, 2018-Evidence on the use of compression stockings (CS) during soccer matches is limited. Thus, we evaluated the acute effects of CS on match-based physical performance indicators and perceptual responses during 2 consecutive soccer matches with 72-hour recovery. Twenty outfield players were randomly allocated to the CS group (20-30 mm Hg) or control group (non-CS) and performed 2 matches (5 players using CS or regular socks per team/match). Match loads {rating of perceived exertion × minutes; CS ∼830 vs. control 843 (arbitrary units [AU])} and heart rate (HR) responses (both CS and control ∼86% HRpeak) did not differ (p > 0.05) between CS and control groups. Although total distance covered did not differ (p > 0.05) between groups, CS increased distances (effect size [ES] = 0.9-1.32) in higher-speed zones (>19 km·h CS ∼550 m vs. control ∼373 m) alongside an increased number of accelerations (-50.0 to -3.0 m·s) than control (CS: 33.7 ± 11.2 vs. control: 23.8 ± 7.9; p = 0.003; ES = 1.04). Perceived recovery did not differ (p > 0.05) between groups for either match but was worse in the second match for both groups. Perceived muscle soreness increased in control after match 2 (from 3.1 ± 1.9 to 6.3 ± 1.6 AU; p < 0.0010) but did not in CS (from 2.8 ± 1.4 to 4.1 ± 1.9 AU; p = 0.6275; ES = 1.24 CS vs. control after match). Accordingly, CS use during 2 soccer matches with 72-hour recovery reduces perceived muscle soreness in the second match and increases higher-speed match running performance
Physiological and enzymatic changes in rice seeds stored at low temperatures
This study aimed to evaluate the effect of low temperatures on the physiological and enzymatic changes of rice seeds. The seeds were packed in airtight chambers and maintained at temperatures of 8 and -50°C for periods of 15, 30 , 45, 60, 75 and 90 days. The same procedure was adopted for the control treatment with the seeds kept at a temperature of 25°C. The seeds were evaluated regarding germination test; seedling emergency; emergency speed index; length and dry weight of radicle; and seedling of shoot. The activity of amylase and total protein content were also evaluated. The temperatures of 8 and -50°C significantly influenced the physiological quality and the enzyme amylase activity of rice seeds, resulting in higher germination, seedling emergence and enzyme activity. The temperature is a promising alternative for the maintenance of physiological quality and enzymatic activity of rice seeds during storage. Key words: Oryza sativa L., enzymatic activity, physiological quality, storage.Abbreviation: ESI, Emergence speed index; PVP, polyvinylpyrrolidone
Aortic valve replacement with different types of prosthesis. Are there differences in the outcomes during hospital phase?
Objective: To analyze intraoperative data and possible differences in clinical evolution during postoperative hospital phase for aortic valve replacement surgery using different types of prosthesis. Methods: Analysis of 60 patients divided into three groups. Valve replacement with bioprosthesis (20), mechanical prosthesis (20) and homologous valve (20). The mean age was 51.1, 60% were male and 40% female patients; 86.7% were in NYHA II or III; 63.3% presented arterial hypertension and 18.3% had diabetes. Aetiology of valve disease was degenerative for 39%, rheumatic for 36% and endocardits for 15%. Results: The hospital mortality was 5%; there were no differences in the incidence of septical or cardiogenic intensive care, neither for total time in intensive care and mechanical ventilation. However, there was statistical differences as regards the cardiopulmonary bypass total time (P=0.02) and the aortic clamping time (P<0.0001) unfavorable to homograft valve group. The ward admission time was greater for mechanical valve group (P=0.05) as well as for total admission time, but without statistical significance. It was observed that patients with preoperative hematocrit smaller than 38.1% used 2.73 units of blood components, and with postoperative hematocrit smaller than 32% used 1,79 units of blood components. Echocardiography control showed minimal evolutional differences. Conclusion: The use of different types of prosthesis for this study does not cause differences in the results of postoperative hospital phase. The use of homograft valve is a feasible option with good clinical applicability23453454
Numerical Simulation of Nacelle Flowfield for Counter-Rotating Open Rotor Propellers
This paper summarizes the development of a tool for designing axisymmetric nacelles for counter-rotating open rotor (CROR) engines, based on predefined geometries, global input relations and one-dimensional perfect gas equations. A nacelle geometry was generated to match the flight conditions and base dimensions of the Airbus AI-PX7 CROR propeller. Furthermore, the 3D turbulent flowfield around the nacelle was evaluated via Computational Fluid Dynamics (CFD) for four different angles of attack: 0\ub0, 4\ub0, 6\ub0 and 8\ub0. The computations were performed for the nacelle without the propellers as a first analysis. The formation of shock waves, boundary layer separation and inlet flow distortion were the main parameters of the CFD study. The nacelle design was considered to be successful as a preliminary approach, since, even for the highest angle of attack, no critical conditions for the engine performance were detected
Probing the role of grain boundaries in single Cu nanoparticle oxidation by in situ plasmonic scattering
Grain boundaries determine physical properties of bulk materials including ductility, diffusivity, and electrical conductivity. However, the role of grain boundaries in nanostructures and nanoparticles is much less understood, despite the wide application of nanoparticles in nanophotonics, nanoelectronics, and heterogeneous catalysis. Here, we investigate the role of high-angle grain boundaries in the oxidation of Cu nanoparticles, using a combination of in situ single particle plasmonic nanoimaging and postmortem transmission electron microscopy image analysis, together with ab initio and classical electromagnetic calculations. We find an initial growth of a 5-nm-thick Cu2O shell on all nanoparticles, irrespective of different grain morphologies. This insensitivity of the Cu2O shell on the grain morphology is rationalized by extraction of Cu atoms from the metal lattice being the rate limiting step, as proposed by density functional theory calculations. Furthermore, we find that the change in optical scattering intensity measured from the individual particles can be deconvoluted into one contribution from the oxide layer growth and one contribution that is directly proportional to the grain boundary density. The latter contribution signals accumulation of Cu vacancies at the grain boundaries, which, as corroborated by calculations of the optical scattering, leads to increased absorption losses and thus a decrease of the scattering, thereby manifesting the role of grain boundaries as vacancy sinks and nuclei for Kirkendall void formation at a later stage of the oxidation process
Purifying Selection in Deeply Conserved Human Enhancers Is More Consistent than in Coding Sequences
(c) 2014 De Silva et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited
- …