11,980 research outputs found
Surface effects on nanowire transport: numerical investigation using the Boltzmann equation
A direct numerical solution of the steady-state Boltzmann equation in a
cylindrical geometry is reported. Finite-size effects are investigated in large
semiconducting nanowires using the relaxation-time approximation. A nanowire is
modelled as a combination of an interior with local transport parameters
identical to those in the bulk, and a finite surface region across whose width
the carrier density decays radially to zero. The roughness of the surface is
incorporated by using lower relaxation-times there than in the interior.
An argument supported by our numerical results challenges a commonly used
zero-width parametrization of the surface layer. In the non-degenerate limit,
appropriate for moderately doped semiconductors, a finite surface width model
does produce a positive longitudinal magneto-conductance, in agreement with
existing theory. However, the effect is seen to be quite small (a few per cent)
for realistic values of the wire parameters even at the highest practical
magnetic fields. Physical insights emerging from the results are discussed.Comment: 15 pages, 7 figure
Determining the phonon DOS from specific heat measurements via maximum entropy methods
The maximum entropy and reverse Monte-Carlo methods are applied to the
computation of the phonon density of states (DOS) from heat capacity data. The
approach is introduced and the formalism is described. Simulated data is used
to test the method, and its sensitivity to noise. Heat capacity measurements
from diamond are used to demonstrate the use of the method with experimental
data. Comparison between maximum entropy and reverse Monte-Carlo results shows
the form of the entropy used here is correct, and that results are stable and
reliable. Major features of the DOS are picked out, and acoustic and optical
phonons can be treated with the same approach. The treatment set out in this
paper provides a cost-effective and reliable method for studies of the phonon
properties of materials.Comment: Reprint to improve access. 10 pages, 6 figure
Extent of pollution in planet-bearing stars
(abridged) Search for planets around main-sequence (MS) stars more massive
than the Sun is hindered by their hot and rapidly spinning atmospheres. This
obstacle has been sidestepped by radial-velocity surveys of those stars on
their post-MS evolutionary track (G sub-giant and giant stars). Preliminary
observational findings suggest a deficiency of short-period hot Jupiters around
the observed post MS stars, although the total fraction of them with known
planets appears to increase with their mass. Here we consider the possibility
that some very close- in gas giants or a population of rocky planets may have
either undergone orbital decay or been engulfed by the expanding envelope of
their intermediate-mass host stars. If such events occur during or shortly
after those stars' main sequence evolution when their convection zone remains
relatively shallow, their surface metallicity can be significantly enhanced by
the consumption of one or more gas giants. We show that stars with enriched
veneer and lower-metallicity interior follow slightly modified evolution tracks
as those with the same high surface and interior metallicity. As an example, we
consider HD149026, a marginal post MS 1.3 Msun star. We suggest that its
observed high (nearly twice solar) metallicity may be confined to the surface
layer as a consequence of pollution by the accretion of either a planet similar
to its known 2.7-day-period Saturn-mass planet, which has a 70 Mearth compact
core, or a population of smaller mass planets with a comparable total amount of
heavy elements. It is shown that an enhancement in surface metallicity leads to
a reduction in effective temperature, in increase in radius and a net decrease
in luminosity. The effects of such an enhancement are not negligible in the
determinations of the planet's radius based on the transit light curves.Comment: 25 pages, 8 figures, submitted to Ap
Einstein Cluster Alignments Revisited
We have examined whether the major axes of rich galaxy clusters tend to point
toward their nearest neighboring cluster. We have used the data of Ulmer,
McMillan, and Kowalski, who used position angles based on X-ray morphology. We
also studied a subset of this sample with updated positions and distances from
the MX Northern Abell Cluster Survey (for rich clusters () with well
known redshifts). A Kolmogorov-Smirnov (KS) test showed no significant signal
for nonrandom angles on any scale Mpc. However, refining the
null hypothesis with the Wilcoxon rank-sum test, we found a high confidence
signal for alignment. Confidence levels increase to a high of 99.997% as only
near neighbors which are very close are considered. We conclude there is a
strong alignment signal in the data, consistent with gravitational instability
acting on Gaussian perturbations.Comment: Minor revisions. To be published in Ap
Gravitational quasinormal modes for Anti-de Sitter black holes
Quasinormal mode spectra for gravitational perturbations of black holes in
four dimensional de Sitter and anti-de Sitter space are investigated. The
anti-de Sitter case is relevant to the ADS-CFT correspondence in superstring
theory. The ADS-CFT correspondence suggests a prefered set of boundary
conditions.Comment: 12 pages, 6 figures in ReVTe
Federating distributed clinical data for the prediction of adverse hypotensive events
The ability to predict adverse hypotensive events, where a patient's arterial blood pressure drops to abnormally low (and dangerous) levels, would be of major benefit to the fields of primary and secondary health care, and especially to the traumatic brain injury domain. A wealth of data exist in health care systems providing information on the major health indicators of patients in hospitals (blood pressure, temperature, heart rate, etc.). It is believed that if enough of these data could be drawn together and analysed in a systematic way, then a system could be built that will trigger an alarm predicting the onset of a hypotensive event over a useful time scale, e.g. half an hour in advance. In such circumstances, avoidance measures can be taken to prevent such events arising. This is the basis for the Avert-IT project (http://www.avert-it.org), a collaborative EU-funded project involving the construction of a hypotension alarm system exploiting Bayesian neural networks using techniques of data federation to bring together the relevant information for study and system development
A Requirement-centric Approach to Web Service Modeling, Discovery, and Selection
Service-Oriented Computing (SOC) has gained considerable popularity for implementing Service-Based Applications (SBAs) in a flexible\ud
and effective manner. The basic idea of SOC is to understand users'\ud
requirements for SBAs first, and then discover and select relevant\ud
services (i.e., that fit closely functional requirements) and offer\ud
a high Quality of Service (QoS). Understanding users requirements\ud
is already achieved by existing requirement engineering approaches\ud
(e.g., TROPOS, KAOS, and MAP) which model SBAs in a requirement-driven\ud
manner. However, discovering and selecting relevant and high QoS\ud
services are still challenging tasks that require time and effort\ud
due to the increasing number of available Web services. In this paper,\ud
we propose a requirement-centric approach which allows: (i) modeling\ud
users requirements for SBAs with the MAP formalism and specifying\ud
required services using an Intentional Service Model (ISM); (ii)\ud
discovering services by querying the Web service search engine Service-Finder\ud
and using keywords extracted from the specifications provided by\ud
the ISM; and(iii) selecting automatically relevant and high QoS services\ud
by applying Formal Concept Analysis (FCA). We validate our approach\ud
by performing experiments on an e-books application. The experimental\ud
results show that our approach allows the selection of relevant and\ud
high QoS services with a high accuracy (the average precision is\ud
89.41%) and efficiency (the average recall is 95.43%)
Connected and disconnected quark contributions to hadron spin
By introducing an external spin operator to the fermion action, the quark
spin fractions of hadrons are determined from the linear response of the hadron
energies using the Feynman-Hellmann (FH) theorem. At our SU(3)-flavour
symmetric point, we find that the connected quark spin fractions are
universally in the range 55-70\% for vector mesons and octet and decuplet
baryons. There is an indication that the amount of spin suppression is quite
sensitive to the strength of SU(3) breaking. We also present first preliminary
results applying the FH technique to calculations of quark-line disconnected
contributions to hadronic matrix elements of axial and tensor operators. At the
SU(3)-flavour symmetric point we find a small negative contribution to the
nucleon spin from disconnected quark diagrams, while the corresponding tensor
matrix elements are consistent with zero.Comment: 7 pages, 5 figures, 32nd International Symposium on Lattice Field
Theor
Cosmic Censorship: As Strong As Ever
Spacetimes which have been considered counter-examples to strong cosmic
censorship are revisited. We demonstrate the classical instability of the
Cauchy horizon inside charged black holes embedded in de Sitter spacetime for
all values of the physical parameters. The relevant modes which maintain the
instability, in the regime which was previously considered stable, originate as
outgoing modes near to the black hole event horizon. This same mechanism is
also relevant for the instability of Cauchy horizons in other proposed
counter-examples of strong cosmic censorship.Comment: 4 pages RevTeX style, 1 figure included using epsfi
Lunar lander conceptual design
This paper is a first look at the problems of building a lunar lander to support a small lunar surface base. A series of trade studies was performed to define the lander. The initial trades concerned choosing number of stages, payload mass, parking orbit altitude, and propellant type. Other important trades and issues included plane change capability, propellant loading and maintenance location, and reusability considerations. Given a rough baseline, the systems were then reviewed. A conceptual design was then produced. The process was carried through only one iteration. Many more iterations are needed. A transportation system using reusable, aerobraked orbital transfer vehicles (OTV's) is assumed. These OTV's are assumed to be based and maintained at a low Earth orbit (LEO) space station, optimized for transportation functions. Single- and two-stage OTV stacks are considered. The OTV's make the translunar injection (TLI), lunar orbit insertion (LOI), and trans-Earth injection (TEI) burns, as well as midcourse and perigee raise maneuvers
- …