Impactor flux and cratering on Ceres and Vesta: Implications for the early Solar System

We study the impactor flux and cratering on Ceres and Vesta caused by the collisional and dynamical evolution of the asteroid Main Belt. We develop a statistical code based on a well-tested model for the simultaneous evolution of the Main Belt and NEA size distributions. This code includes catastrophic collisions and noncollisional removal processes such as the Yarkovsky effect and the orbital resonances. The model assumes that the dynamical depletion of the early Main Belt was very strong, and owing to that, most Main Belt comminution occurred when its dynamical structure was similar to the present one. Our results indicate that the number of D > 1 km Main Belt asteroids striking Ceres and Vesta over the Solar System history are approximately 4 600 and 1 100 respectively. The largest Main Belt asteroids expected to have impacted Ceres and Vesta had diameters of 71.7 km and 21.1 km. The number of D > 0.1 km craters on Ceres is \sim 3.4 \times 10^8 and 6.2 \times 10^7 on Vesta. The number of craters with D > 100 km are 47 on Ceres and 8 on Vesta. Our study indicates that the D = 460 km crater observed on Vesta had to be formed by the impact of a D \sim 66.2 km projectile, which has a probability of occurr \sim 30% over the Solar System history. If significant discrepancies between our results about the cratering on Ceres and Vesta and data obtained from the Dawn Mission were found, they should be linked to a higher degree of collisional evolution during the early Main Belt and/or the existence of the late heavy bombardment. An increase in the collisional activity in the early phase may be provided for an initial configuration of the giant planets consistent with, for example, the Nice model. From this, the Dawn Mission would be able to give us clues about the initial configuration of the early Solar System and its subsequent dynamical evolution.Comment: Accepted for publication in Astronomy and Astrophysic

How Much Transparency is Too Much? A Moment-to-Moment Analysis of Viewer Comfort in Response to Animal Slaughter Videos

The Glass Walls project is a series of videos created by the American Meat Institute that works to create increased transparency regarding agricultural industry practices surrounding animal slaughter and carcass fabrication. To assess the impact of the increased transparency presented in these videos, this study examined consumer response to sampled portions of these videos using a novel measurement approach to agricultural communications, continuous response measurement or “dial testing.” Two samples of college students who differed in their level of agricultural involvement provided continuous ratings of perceived comfort while viewing the two videos. Findings indicated that participants with higher agricultural involvement reported less discomfort with the material being presented. Further, critical moments within the videos that elicited a strong uncomfortable response were identified through this novel measurement approach. These moments elicited strong responses, regardless of viewers’ level of agricultural involvement. Results suggested that attempts at increased transparency may elicit discomfort from the consumer. Therefore, practitioners and researchers should seek to develop ways to present the same material, but in a way that creates less discomfort for the audience. In addition to the findings of this study, details regarding the use and need of continuous response measurement in agricultural communications are included

The contamination of the surface of Vesta by impacts and the delivery of the dark material

The Dawn spacecraft observed the presence of dark material, which in turn proved to be associated with OH and H-rich material, on the surface of Vesta. The source of this dark material has been identified with the low albedo asteroids, but it is still a matter of debate whether the delivery of the dark material is associated with a few large impact events, to micrometeorites or to the continuous, secular flux of impactors on Vesta. The continuous flux scenario predicts that a significant fraction of the exogenous material accreted by Vesta should be due to non-dark impactors likely analogous to ordinary chondrites, which instead represent only a minor contaminant in the HED meteorites. We explored the continuous flux scenario and its implications for the composition of the vestan regolith, taking advantage of the data from the Dawn mission and the HED meteorites. We used our model to show that the stochastic events scenario and the micrometeoritic flux scenario are natural consequences of the continuous flux scenario. We then used the model to estimate the amounts of dark and hydroxylate materials delivered on Vesta since the LHB and we showed how our results match well with the values estimated by the Dawn mission. We used our model to assess the amount of Fe and siderophile elements that the continuous flux of impactors would mix in the vestan regolith: concerning the siderophile elements, we focused our attention on the role of Ni. The results are in agreement with the data available on the Fe and Ni content of the HED meteorites and can be used as a reference frame in future studies of the data from the Dawn mission and of the HED meteorites. Our model cannot yet provide an answer to the fate of the missing non-carbonaceous contaminants, but we discuss possible reasons for this discrepancy.Comment: 31 pages, 7 figures, 4 tables. Accepted for publication on the journal ICARUS, "Dark and Bright Materials on Vesta" special issu

Rare case of coronary to pulmonary vein fistula with coronary steal phenomenon

Coronary artery fistulas are abnormal connections between coronary artery territories and cardiac chambers or major vessels, most of them are congenital. Patients with coronary artery fistula can be asymptomatic or present with different symptoms like angina. Cardiac computed tomography (CT) is one of the best modalities for diagnosis. We present an elderly patient that presented with angina symptoms, non invasive stress test was positive for ischemic heart disease, coronary angiogram could not reveal any obstructive lesions, but an abnormal branch of the left descending coronary artery (LAD), cardiac CT showed fistula that connect left anterior descending coronary artery to left superior pulmonary vein. Our case is extremely rare as most of the reported cases were fistulas between LAD and pulmonary artery, but in our case the fistula between LAD and left superior pulmonary vein. In addition, our patients\u27 symptoms resolved with anti-ischemic medical treatment without any surgical intervention

Lunar scout missions: Galileo encounter results and application to scientific problems and exploration requirements

The Lunar Scout Missions (payload: x-ray fluorescence spectrometer, high-resolution stereocamera, neutron spectrometer, gamma-ray spectrometer, imaging spectrometer, gravity experiment) will provide a global data set for the chemistry, mineralogy, geology, topography, and gravity of the Moon. These data will in turn provide an important baseline for the further scientific exploration of the Moon by all-purpose landers and micro-rovers, and sample return missions from sites shown to be of primary interest from the global orbital data. These data would clearly provide the basis for intelligent selection of sites for the establishment of lunar base sites for long-term scientific and resource exploration and engineering studies. The two recent Galileo encounters with the Moon (December, 1990 and December, 1992) illustrate how modern technology can be applied to significant lunar problems. We emphasize the regional results of the Galileo SSI to show the promise of geologic unit definition and characterization as an example of what can be done with the global coverage to be obtained by the Lunar Scout Missions

Integrated engineering environments for large complex products

An introduction is given to the Engineering Design Centre at the University of Newcastle upon Tyne, along with a brief explanation of the main focus towards large made-to-order products. Three key areas of research at the Centre, which have evolved as a result of collaboration with industrial partners from various sectors of industry, are identified as (1) decision support and optimisation, (2) design for lifecycle, and (3) design integration and co-ordination. A summary of the unique features of large made-to-order products is then presented, which includes the need for integration and co-ordination technologies. Thus, an overview of the existing integration and co-ordination technologies is presented followed by a brief explanation of research in these areas at the Engineering Design Centre. A more detailed description is then presented regarding the co-ordination aspect of research being conducted at the Engineering Design Centre, in collaboration with the CAD Centre at the University of Strathclyde. Concurrent Engineering is acknowledged as a strategy for improving the design process, however design coordination is viewed as a principal requirement for its successful implementation. That is, design co-ordination is proposed as being the key to a mechanism that is able to maximise and realise any potential opportunity of concurrency. Thus, an agentoriented approach to co-ordination is presented, which incorporates various types of agents responsible for managing their respective activities. The co-ordinated approach, which is implemented within the Design Co-ordination System, includes features such as resource management and monitoring, dynamic scheduling, activity direction, task enactment, and information management. An application of the Design Co-ordination System, in conjunction with a robust concept exploration tool, shows that the computational design analysis involved in evaluating many design concepts can be performed more efficiently through a co-ordinated approach

Magnetic Quantum Dot: A Magnetic Transmission Barrier and Resonator

We study the ballistic edge-channel transport in quantum wires with a magnetic quantum dot, which is formed by two different magnetic fields B^* and B_0 inside and outside the dot, respectively. We find that the electron states located near the dot and the scattering of edge channels by the dot strongly depend on whether B^* is parallel or antiparallel to B_0. For parallel fields, two-terminal conductance as a function of channel energy is quantized except for resonances, while, for antiparallel fields, it is not quantized and all channels can be completely reflected in some energy ranges. All these features are attributed to the characteristic magnetic confinements caused by nonuniform fields.Comment: 4 pages, 4 figures, to be published in Physical Review Letter

Future aspects of renal transplantation

New and exciting advances in renal transplantation are continuously being made, and the horizons for organ transplantation are bright and open. This article reviews only a few of the newer advances that will allow renal transplantation to become even more widespread and successful. The important and exciting implications for extrarenal organ transplantation are immediately evident. © 1988 Springer-Verlag

Self-similarity and novel sample-length-dependence of conductance in quasiperiodic lateral magnetic superlattices

We study the transport of electrons in a Fibonacci magnetic superlattice produced on a two-dimensional electron gas modulated by parallel magnetic field stripes arranged in a Fibonacci sequence. Both the transmission coefficient and conductance exhibit self-similarity and the six-circle property. The presence of extended states yields a finite conductivity at infinite length, that may be detected as an abrupt change in the conductance as the Fermi energy is varied, much as a metal-insulator transition. This is a unique feature of transport in this new kind of structure, arising from its inherent two-dimensional nature.Comment: 9 pages, 5 figures, revtex, important revisions made. to be published in Phys. Rev.

Electronic structure of nuclear-spin-polarization-induced quantum dots

We study a system in which electrons in a two-dimensional electron gas are confined by a nonhomogeneous nuclear spin polarization. The system consists of a heterostructure that has non-zero nuclei spins. We show that in this system electrons can be confined into a dot region through a local nuclear spin polarization. The nuclear-spin-polarization-induced quantum dot has interesting properties indicating that electron energy levels are time-dependent because of the nuclear spin relaxation and diffusion processes. Electron confining potential is a solution of diffusion equation with relaxation. Experimental investigations of the time-dependence of electron energy levels will result in more information about nuclear spin interactions in solids