96 research outputs found

    Who will benefit more from low-dose alteplase in acute ischemic stroke?

    Get PDF
    Objectives: Controversy persists over the benefits of low-dose versus standard-dose intravenous alteplase for the treatment of acute ischemic stroke. We sought to determine individual patient factors that contribute to the risk–benefit balance of low-dose alteplase treatment. Methods: Observational study using data from the Enhanced Control of Hypertension and Thrombolysis Stroke Study (ENCHANTED), an international, randomized, open-label, blinded-endpoint trial that assessed low-dose (0.6 mg/kg) versus standard-dose (0.9 mg/kg) intravenous alteplase in acute ischemic stroke patients. Logistic regression models were used to estimate the benefit of good functional outcome (scores 0 or 1 on the modified Rankin scale at 90 days) and risk (symptomatic intracerebral hemorrhage), under both regimens for individual patients. The net advantage for low-dose, relative to standard-dose, alteplase was calculated by dividing excess benefit by excess risk according to a combination of patient characteristics. The algorithms were externally validated in a nationwide acute stroke registry database in South Korea. Results: Patients with an estimated net advantage from low-dose alteplase, compared with without, were younger (mean age of 66 vs. 75 years), had lower systolic blood pressure (148 vs. 160 mm Hg), lower National Institute of Health Stroke Scale score (median of 8 vs. 16), and no atrial fibrillation (10.3% vs. 97.4%), diabetes mellitus (19.2% vs. 22.4%), or premorbid symptoms (defined by modified Rankin scale = 1) (16.3% vs. 37.8%). Conclusion: Use of low-dose alteplase may be preferable in acute ischemic stroke patients with a combination of favorable characteristics, including younger age, lower systolic blood pressure, mild neurological impairment, and no atrial fibrillation, diabetes mellitus, or premorbid symptoms.</p

    Chemiluminescence determination of surfactant Triton X-100 in environmental water with luminol-hydrogen peroxide system

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>The rapid, simple determination of surfactants in environmental samples is essential because of the extensive use and its potential as contaminants. We describe a simple, rapid chemiluminescence method for the direct determination of the non-ionic surfactant Triton X-100 (polyethylene glycol tert-octylphenyl ether) in environmental water samples. The optimized experimental conditions were selected, and the mechanism of the Luminol-H<sub>2</sub>O<sub>2</sub>-Triton X-100 chemiluminesence system was also studied.</p> <p>Results</p> <p>The novel chemiluminescence method for the determination of non-ionic surfactant Triton X-100 was based on the phenomenon that Triton X-100 greatly enhanced the CL signal of the luminol-H<sub>2</sub>O<sub>2 </sub>system. The alkaline medium of luminol and the pH value obviously affected the results. Luminol concentration and hydrogen peroxide concentration also affected the results. The optimal conditions were: Na<sub>2</sub>CO<sub>3 </sub>being the medium, pH value 12.5, luminol concentration 1.0 × 10<sup>-4 </sup>mol L<sup>-1</sup>, H<sub>2</sub>O<sub>2 </sub>concentration 0.4 mol L<sup>-1</sup>. The possible mechanism was studied and proposed.</p> <p>Conclusion</p> <p>Under the optimal conditions, the standard curve was drawn up and quotas were evaluated. The linear range was 2 × 10<sup>-4 </sup>g·mL<sup>-1</sup>-4 × 10<sup>-2 </sup>g·mL<sup>-1 </sup>(w/v), and the detection limit was 3.97 × 10<sup>-5 </sup>g·mL<sup>-1 </sup>Triton X-100 (w/v). The relative standard deviation was less than 4.73% for 2 × 10<sup>-2 </sup>g·mL<sup>-1 </sup>(w/v) Triton X-100 (n = 7). This method has been applied to the determination of Triton X-100 in environmental water samples. The desirable recovery ratio was between 96%–102% and the relative standard deviation was 2.5%–3.3%. The luminescence mechanism was also discussed in detail based on the fluorescence spectrum and the kinetic curve, and demonstrated that Triton X-100-luminol-H<sub>2</sub>O<sub>2 </sub>was a rapid reaction.</p

    Influence of packing density and surface roughness of vertically-aligned carbon nanotubes on adhesive properties of gecko-inspired mimetics.

    Get PDF
    We have systematically studied the macroscopic adhesive properties of vertically aligned nanotube arrays with various packing density and roughness. Using a tensile setup in shear and normal adhesion, we find that there exists a maximum packing density for nanotube arrays to have adhesive properties. Too highly packed tubes do not offer intertube space for tube bending and side-wall contact to surfaces, thus exhibiting no adhesive properties. Likewise, we also show that the surface roughness of the arrays strongly influences the adhesion properties and the reusability of the tubes. Increasing the surface roughness of the array strengthens the adhesion in the normal direction, but weakens it in the shear direction. Altogether, these results allow progress toward mimicking the gecko's vertical mobility.The authors acknowledge funding from the EC project Technotubes.This is the accepted manuscript. The final version is available at http://pubs.acs.org/doi/abs/10.1021/am507822b

    Degradation of Potassium Rock by Earthworms and Responses of Bacterial Communities in Its Gut and Surrounding Substrates after Being Fed with Mineral

    Get PDF
    BACKGROUND: Earthworms are an ecosystem's engineers, contributing to a wide range of nutrient cycling and geochemical processes in the ecosystem. Their activities can increase rates of silicate mineral weathering. Their intestinal microbes usually are thought to be one of the key drivers of mineral degradation mediated by earthworms,but the diversities of the intestinal microorganisms which were relevant with mineral weathering are unclear. METHODOLOGY/PRINCIPAL FINDINGS: In this report, we show earthworms' effect on silicate mineral weathering and the responses of bacterial communities in their gut and surrounding substrates after being fed with potassium-bearing rock powder (PBRP). Determination of water-soluble and HNO(3)-extractable elements indicated some elements such as Al, Fe and Ca were significantly released from mineral upon the digestion of earthworms. The microbial communities in earthworms' gut and the surrounding substrates were investigated by amplified ribosomal DNA restriction analysis (ARDRA) and the results showed a higher bacterial diversity in the guts of the earthworms fed with PBRP and the PBRP after being fed to earthworms. UPGMA dendrogram with unweighted UniFrac analysis, considering only taxa that are present, revealed that earthworms' gut and their surrounding substrate shared similar microbiota. UPGMA dendrogram with weighted UniFrac, considering the relative abundance of microbial lineages, showed the two samples from surrounding substrate and the two samples from earthworms' gut had similarity in microbial community, respectively. CONCLUSIONS/SIGNIFICANCE: Our results indicated earthworms can accelerate degradation of silicate mineral. Earthworms play an important role in ecosystem processe since they not only have some positive effects on soil structure, but also promote nutrient cycling of ecosystem by enhancing the weathering of minerals

    Genome-wide identification and expression profiling of auxin response factor (ARF) gene family in maize

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Auxin signaling is vital for plant growth and development, and plays important role in apical dominance, tropic response, lateral root formation, vascular differentiation, embryo patterning and shoot elongation. Auxin Response Factors (ARFs) are the transcription factors that regulate the expression of auxin responsive genes. The <it>ARF </it>genes are represented by a large multigene family in plants. The first draft of full maize genome assembly has recently been released, however, to our knowledge, the <it>ARF </it>gene family from maize (<it>ZmARF </it>genes) has not been characterized in detail.</p> <p>Results</p> <p>In this study, 31 maize (<it>Zea mays </it>L.) genes that encode ARF proteins were identified in maize genome. It was shown that maize <it>ARF </it>genes fall into related sister pairs and chromosomal mapping revealed that duplication of <it>ZmARFs </it>was associated with the chromosomal block duplications. As expected, duplication of some <it>ZmARFs </it>showed a conserved intron/exon structure, whereas some others were more divergent, suggesting the possibility of functional diversification for these genes. Out of these 31 <it>ZmARF </it>genes, 14 possess auxin-responsive element in their promoter region, among which 7 appear to show small or negligible response to exogenous auxin. The 18 <it>ZmARF </it>genes were predicted to be the potential targets of small RNAs. Transgenic analysis revealed that increased miR167 level could cause degradation of transcripts of six potential targets (<it>ZmARF3</it>, <it>9</it>, <it>16</it>, <it>18</it>, <it>22 </it>and <it>30</it>). The expressions of maize <it>ARF </it>genes are responsive to exogenous auxin treatment. Dynamic expression patterns of <it>ZmARF </it>genes were observed in different stages of embryo development.</p> <p>Conclusions</p> <p>Maize <it>ARF </it>gene family is expanded (31 genes) as compared to <it>Arabidopsis </it>(23 genes) and rice (25 genes). The expression of these genes in maize is regulated by auxin and small RNAs. Dynamic expression patterns of <it>ZmARF </it>genes in embryo at different stages were detected which suggest that maize <it>ARF </it>genes may be involved in seed development and germination.</p

    COSORE: A community database for continuous soil respiration and other soil‐atmosphere greenhouse gas flux data

    Get PDF
    Globally, soils store two to three times as much carbon as currently resides in the atmosphere, and it is critical to understand how soil greenhouse gas (GHG) emissions and uptake will respond to ongoing climate change. In particular, the soil‐to‐atmosphere CO2 flux, commonly though imprecisely termed soil respiration (RS), is one of the largest carbon fluxes in the Earth system. An increasing number of high‐frequency RS measurements (typically, from an automated system with hourly sampling) have been made over the last two decades; an increasing number of methane measurements are being made with such systems as well. Such high frequency data are an invaluable resource for understanding GHG fluxes, but lack a central database or repository. Here we describe the lightweight, open‐source COSORE (COntinuous SOil REspiration) database and software, that focuses on automated, continuous and long‐term GHG flux datasets, and is intended to serve as a community resource for earth sciences, climate change syntheses and model evaluation. Contributed datasets are mapped to a single, consistent standard, with metadata on contributors, geographic location, measurement conditions and ancillary data. The design emphasizes the importance of reproducibility, scientific transparency and open access to data. While being oriented towards continuously measured RS, the database design accommodates other soil‐atmosphere measurements (e.g. ecosystem respiration, chamber‐measured net ecosystem exchange, methane fluxes) as well as experimental treatments (heterotrophic only, etc.). We give brief examples of the types of analyses possible using this new community resource and describe its accompanying R software package

    Highly efficient protein capture and enzyme reactor beds based on ultra-high-aspect- Ratio nanostructures (uharns)

    No full text
    Demonstrated here is a unique, and previously unreported, template-assisted polymerization pattern transfer method for the tailor-made fabrication of ultra-high-aspect-ratio (up to 1600:1) nanostructures (nanopillars) integrated into polymer-based MEMS devices. UHARN pillars are readily surface modified with proteins and aptamers via resist-free patterning methods to afford enzyme reactors and protein capture beds with unprecedented surface-to-volume ratios (from 1 × 104 cm-1 to up to 6 × 104 cm-1 versus ∼500 for open channels), resulting in rapid enzyme consumption of substrates and high efficiency capture of target analytes. Copyright © 2005 by the Transducer Research Foundation, Inc
    corecore