Study and design of a cryogenic propellant acquisition system

The development of an acquisition system for supplying subcooled liquid hydrogen and liquid oxygen under in-orbit conditions is discussed. The system will be applied to the integrated cryogenic feed requirements for space systems such as a space shuttle cryogenic auxiliary propulsion system (APS) and main propulsion for an advanced spacecraft propulsion module (ASPM). Concepts that use the favorable surface tension characteristics of fine mesh screens are emphasized. The specific objectives of the program are: (1) to evolve conceptual designs for candidate acquisition systems, (2) to formulate the analytical models needed to analyze the systems, and (3) to generate parametric data on overall candidate system performance, characteristics, and operational features in sufficient depth to establish critical design problems and criteria to support a sound system design and evaluation

Study and design of cryogenic propellant acquisition systems. Volume 2: Supporting experimental program

Areas of cryogenic fuel systems were identified where critical experimental information was needed either to define a design criteria or to establish the feasibility of a design concept or a critical aspect of a particular design. Such data requirements fell into three broad categories: (1) basic surface tension screen characteristics; (2) screen acquisition device fabrication problems; and (3) screen surface tension device operational failure modes. To explore these problems and to establish design criteria where possible, extensive laboratory or bench test scale experiments were conducted. In general, these proved to be quite successful and, in many instances, the test results were directly used in the system design analyses and development. In some cases, particularly those relating to operational-type problems, areas requiring future research were identified, especially screen heat transfer and vibrational effects

Study and design of cryogenic propellant acquisition systems. Volume 1: Design studies

An in-depth study and selection of practical propellant surface tension acquisition system designs for two specific future cryogenic space vehicles, an advanced cryogenic space shuttle auxiliary propulsion system and an advanced space propulsion module is reported. A supporting laboratory scale experimental program was also conducted to provide design information critical to concept finalization and selection. Designs using localized pressure isolated surface tension screen devices were selected for each application and preliminary designs were generated. Based on these designs, large scale acquisition prototype hardware was designed and fabricated to be compatible with available NASA-MSFC feed system hardware

A Qualitative Impact Evaluation of the First Love Yourself (FLY) Women’s Support Group

Research has shown that social support groups not only have significant effects on the physical and mental health of individuals, but can also be used as predictors of health outcomes. It is, therefore, important that social workers and other public health professionals are aware of the social support groups that exist in communities so as to find ways to utilize these to meet health needs. The study aims to explore the First Love Yourself (FLY) group, an empowerment-based support group specifically designed to meet the needs of Healthy Start consumers, parents and consortium members. A qualitative analysis of the data gathered from this focus group study yielded several key themes. While participants described finding other community resources helpful, they reported having no other outlet for confidential self-expression and connection to peers other than the FLY group. Group members also reported having improved self-esteem, relationships with their children, partners, and family, and ability to cope as a result of participation in the group. Participants further described gaining knowledge and learning skills that were helpful. This included learning parenting, communication, stress and anger management, budgeting, goal-setting and coping skills and techniques. Finally, qualitative analysis of the data gained from the focus group with participants and the group leader revealed the presence of all 11 curative factors described by Yalom (2005). The primary areas for improvement noted by the group and its leader were related to the frequency of group meetings. Both audiences indicated that additional sessions would be beneficial

Changing Northern Hemisphere storm tracks in an ensemble of IPCC climate change simulations

Winter storm-track activity over the Northern Hemisphere and its changes in a greenhouse gas scenario (the Special Report on Emission Scenarios A1B forcing) are computed from an ensemble of 23 single runs from 16 coupled global climate models (CGCMs). All models reproduce the general structures of the observed climatological storm-track pattern under present-day forcing conditions. Ensemble mean changes resulting from anthropogenic forcing include an increase of baroclinic wave activity over the eastern North Atlantic, amounting to 5%–8% by the end of the twenty-first century. Enhanced activity is also found over the Asian continent and over the North Pacific near the Aleutian Islands. At high latitudes and over parts of the subtropics, activity is reduced. Variations of the individual models around the ensemble average signal are not small, with a median of the pattern correlation near r = 0.5. There is, however, no evidence for a link between deviations in present-day climatology and deviations with respect to climate change

Neutron capture on \u3csup\u3e130\u3c/sup\u3eSn during r-process freeze-out

We examine the role of neutron capture on 130Sn during r-process freeze-out in the neutrino-driven wind environment of the core-collapse supernova. We find that the global r-process abundance pattern is sensitive to the magnitude of the neutron capture cross section of 130Sn. The changes to the abundance pattern include not only a relative decrease in the abundance of 130Sn and an increase in the abundance of 131Sn, but also a shift in the distribution of material in the rare earth and third peak regions. © 2009 IOP Publishing Ltd

Erratum: Measurement of d+ Be 7 cross sections for big-bang nucleosynthesis (Physical Review Letters (2019) 122 (182701) DOI: 10.1103/PhysRevLett.122.182701)

The cross sections of nuclear reactions between the radioisotope Be7 and deuterium, a possible mechanism of reducing the production of mass-7 nuclides in big-bang nucleosynthesis, were measured at center-of-mass energies between 0.2 and 1.5 MeV. The measured cross sections are dominated by the (d,a) reaction channel, towards which prior experiments were mostly insensitive. A new resonance at 0.36(5) MeV with a strength of ωγ=1.7(5) keV was observed inside the relevant Gamow window. Calculations of nucleosynthesis outcomes based on the experimental cross section show that the resonance reduces the predicted abundance of primordial Li7, but not sufficiently to solve the primordial lithium problem. (Figure Presented)

Measurement of d+7d + ^7Be cross sections for Big-Bang nucleosynthesis

The cross sections of nuclear reactions between the radioisotope $^7$Be and deuterium, a possible mechanism of reducing the production of mass-7 nuclides in Big-Bang nucleosynthesis, were measured at center-of-mass energies between 0.2 MeV and 1.5 MeV. The measured cross sections are dominated by the $(d,\alpha)$ reaction channel, towards which prior experiments were mostly insensitive. A new resonance at 0.36(5)~MeV with a strength of $\omega\gamma$ = 1.7(5)~keV was observed inside the relevant Gamow window. Calculations of nucleosynthesis outcomes based on the experimental cross section show that the resonance reduces the predicted abundance of primordial $^7$Li, but not sufficiently to solve the primordial lithium problem.Comment: 6 pages, 6 figure