Early growth performances of various seed sources of black (Prunus serotina Erhr.) and wild cherry (Prunus avium L.) seedlings on low and high elevation sites in the western Black Sea Region of Turkey

The growth performances of one-year old seedlings of various black cherry (BC) and wild cherry (WC) seed sources (SSs) that were planted on low elevation sites (LES) and high elevation sites (HES) in the western Black Sea Region (BSR) of Turkey were assessed one and five years after planting (YAP). Significance between and within-species variations were found for seedling growth. On species basis, WC was superior to BC for seedling groundline diameter and height growth for the low elevation sites(LES) of one and five years after planting (YAP), whereas no substantial survival and growth differences were found between the species for the high elevation sites (HES) of five YAP. Generally, seedlings averaged a greater survival on the LES, when compared with those on the HES. Local WC SSs (Tefen, Yayla and Dirgine) demonstrated an enhanced seedling survival and growth on LES than the other SSs. Unlike the LES results, a collection of BC (Michigan 1 and Ukraine) and WC SSs (Dirgine, Germany, and Tefen) displayed the best seedling growth over five years. The HES seedlings frequently experienced diebacks and forking due to heavy snow fall and wildlife browsing. Selection of the local WC SSs was vital for the LES. However, BC SSs may present a potential for planting on the HES with harsher environmental conditions.Keywords: Black cherry, provenance test, seedling growth and survival, wild cherry

Experimental analysis of refrigerated truck thermal behaviour

Paper presented to the 10th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Florida, 14-16 July 2014.This study mainly focuses on experimental investigation of ceiling-slot ventilated enclosures for determining the airflow and thermal characteristics. The experimental prototype has the dimensions of 8.33 m (length) x 2.50 m (height) x 2.46 m (width) and the cooled air is injected into the container through a half-width slot positioned at the centre of front surface and close to the ceiling. The prototype is positioned inside of a climatic test chamber having dimensions of 14 m (length) x 5 m (width) x 6.5 m (height). The temperature and the relative humidity of the test chamber may be varied within limits of (- 20°C and +50°C), and (5% and 95%) respectively. The air velocity at the slot exit is varied by changing the fan speed so that two different Reynolds numbers 4.3x105 and 7.86x105 are studied in the analysis. In experiments, the system at specified inside, outside and airflow conditions is approximately run for two hours to establish steady-state conditions. In recording data, the system data is divided into two groups: 1. The cooling unit data that includes refrigerant side volumetric flow rate, the pressure and temperature at the inlet and outlet of compressor, condenser and evaporator. Additionally, temperature and volumetric flow rate of air through the condenser, and the fuel consumption of the engine are also recorded. 2. The container data covers air velocity at the slot exit, and a total of 110 thermocouples measure the surface temperatures of all surfaces (inside and outside) of the container and local temperature variation of the airflow. Measurements carried out at both sides (air side and refrigerant side) to validate the data with an accuracy band ±6.5% of the air side measurements. The thermal performance of ventilation in the container is measured by a non-dimensional temperature distribution, θx at a particular cross-section. As a result of measured data, conventional COP of the system and f COP based on fuel consumption rate are also presented.dc201

Long-range potential fluctuations and 1/f noise in hydrogenated amorphous silicon

We present a microscopic theory of the low-frequency voltage noise (known as "1/f" noise) in micrometer-thick films of hydrogenated amorphous silicon. This theory traces the noise back to the long-range fluctuations of the Coulomb potential produced by deep defects, thereby predicting the absolute noise intensity as a function of the distribution of defect activation energies. The predictions of this theory are in very good agreement with our own experiments in terms of both the absolute intensity and the temperature dependence of the noise spectra.Comment: 8 pages, 3 figures, several new parts and one new figure are added, but no conceptual revision

Functionalized Poly(3-hexylthiophene)s via Lithium–Bromine Exchange

Poly(3-hexylthiophene) (P3HT) is one of the most extensively investigated conjugated polymers and has been employed as the active material in many devices including field-effect transistors, organic photovoltaics and sensors. As a result, methods to further tune the properties of P3HT are desirable for specific applications. Herein, we report a facile postpolymerization modification strategy to functionalize the 4-position of commercially available P3HT in two simple steps–bromination of the 4-position of P3HT (Br–P3HT) followed by lithium−bromine exchange and quenching with an electrophile. We achieved near quantitative lithium–bromine exchange with Br–P3HT, which requires over 100 thienyl lithiates to be present on a single polymer chain. The lithiated-P3HT is readily combined with functional electrophiles, resulting in P3HT derivatives with ketones, secondary alcohols, trimethylsilyl (TMS) group, fluorine, or an azide at the 4-position. We demonstrated that the azide-modified P3HT could undergo Cu-catalyzed or Cu-free click chemistry, significantly expanding the complexity of the structures that can be appended to P3HT using this method.National Science Foundation (U.S.) (ECCS-0939514

New Hybrid Properties of TiO2 Nanoparticles Surface Modified With Catecholate Type Ligands

Surface modification of nanocrystalline TiO2 particles (45 Å) with bidentate benzene derivatives (catechol, pyrogallol, and gallic acid) was found to alter optical properties of nanoparticles. The formation of the inner-sphere charge–transfer complexes results in a red shift of the semiconductor absorption compared to unmodified nanocrystallites. The binding structures were investigated by using FTIR spectroscopy. The investigated ligands have the optimal geometry for chelating surface Ti atoms, resulting in ring coordination complexes (catecholate type of binuclear bidentate binding–bridging) thus restoring in six-coordinated octahedral geometry of surface Ti atoms. From the Benesi–Hildebrand plot, the stability constants at pH 2 of the order 103 M−1 have been determined

Recent advances in Pichia pastoris as host for heterologous expression system for lipases : a review

The production of heterologous lipases is one of the most promising strategies to increase the productivity of the bioprocesses and to reduce costs, with the final objective that more industrial lipase applications could be implemented. In this chapter, an overview of the new success in synthetic biology, with traditional molecular genetic techniques and bioprocess engineering in the last 5 years in the cell factory Pichia pastoris, the most promising host system for heterologous lipase production, is presented. The goals get on heterologous Candida antarctica, Rhizopus oryzae, and Candida rugosa lipases, three of the most common lipases used in biocatalysis, are showed. Finally, new cell factories producing heterologous lipases are presented

Effectiveness and safety of opicapone in Parkinson's disease patients with motor fluctuations: The OPTIPARK open-label study

BACKGROUND: The efficacy and safety of opicapone, a once-daily catechol-O-methyltransferase inhibitor, have been established in two large randomized, placebo-controlled, multinational pivotal trials. Still, clinical evidence from routine practice is needed to complement the data from the pivotal trials. METHODS: OPTIPARK (NCT02847442) was a prospective, open-label, single-arm trial conducted in Germany and the UK under clinical practice conditions. Patients with Parkinson’s disease and motor fluctuations were treated with opicapone 50 mg for 3 (Germany) or 6 (UK) months in addition to their current levodopa and other antiparkinsonian treatments. The primary endpoint was the Clinician’s Global Impression of Change (CGI-C) after 3 months. Secondary assessments included Patient Global Impressions of Change (PGI-C), the Unified Parkinson’s Disease Rating Scale (UPDRS), Parkinson’s Disease Questionnaire (PDQ-8), and the Non-Motor Symptoms Scale (NMSS). Safety assessments included evaluation of treatment-emergent adverse events (TEAEs) and serious adverse events (SAEs). RESULTS: Of the 506 patients enrolled, 495 (97.8%) took at least one dose of opicapone. Of these, 393 (79.4%) patients completed 3 months of treatment. Overall, 71.3 and 76.9% of patients experienced any improvement on CGI-C and PGI-C after 3 months, respectively (full analysis set). At 6 months, for UK subgroup only (n = 95), 85.3% of patients were judged by investigators as improved since commencing treatment. UPDRS scores at 3 months showed statistically significant improvements in activities of daily living during OFF (mean ± SD change from baseline: − 3.0 ± 4.6, p < 0.0001) and motor scores during ON (− 4.6 ± 8.1, p < 0.0001). The mean ± SD improvements of − 3.4 ± 12.8 points for PDQ-8 and -6.8 ± 19.7 points for NMSS were statistically significant versus baseline (both p < 0.0001). Most of TEAEs (94.8% of events) were of mild or moderate intensity. TEAEs considered to be at least possibly related to opicapone were reported for 45.1% of patients, with dyskinesia (11.5%) and dry mouth (6.5%) being the most frequently reported. Serious TEAEs considered at least possibly related to opicapone were reported for 1.4% of patients. CONCLUSIONS: Opicapone 50 mg was effective and generally well-tolerated in PD patients with motor fluctuations treated in clinical practice. TRIAL REGISTRATION: Registered in July 2016 at clinicaltrials.gov (NCT02847442)