Sfermion Precision Measurements at a Linear Collider

At future e+- e- linear colliders, the event rates and clean signals of scalar fermion production - in particular for the scalar leptons - allow very precise measurements of their masses and couplings and the determination of their quantum numbers. Various methods are proposed for extracting these parameters from the data at the sfermion thresholds and in the continuum. At the same time, NLO radiative corrections and non-zero width effects have been calculated in order to match the experimental accuracy. The substantial mixing expected for the third generation sfermions opens up additional opportunities. Techniques are presented for determining potential CP-violating phases and for extracting tan(beta) from the stau sector, in particular at high values. The consequences of possible large mass differences in the stop and sbottom system are explored in dedicated analyses.Comment: Expanded version of contributions to the proceedings of ICHEP'02 (Amsterdam) and LCWS 2002 (Jeju Island

Eutrophication and macroalgal blooms in temperate and tropical coastal waters: Nutrient enrichment experiments with Ulva spp.

Receiving coastal waters and estuaries are among the most nutrient-enriched environments on earth, and one of the symptoms of the resulting eutrophication is the proliferation of opportunistic, fast-growing marine seaweeds. Here, we used a widespread macroalga often involved in blooms, Ulva spp., to investigate how supply of nitrogen (N) and phosphorus (P), the two main potential growth-limiting nutrients, influence macroalgal growth in temperate and tropical coastal waters ranging from low- to high-nutrient supplies. We carried out N and P enrichment field experiments on Ulva spp. in seven coastal systems, with one of these systems represented by three different subestuaries, for a total of nine sites. We showed that rate of growth of Ulva spp. was directly correlated to annual dissolved inorganic nitrogen (DIN) concentrations, where growth increased with increasing DIN concentration. Internal N pools of macroalgal fronds were also linked to increased DIN supply, and algal growth rates were tightly coupled to these internal N pools. The increases in DIN appeared to be related to greater inputs of wastewater to these coastal waters as indicated by high δ15N signatures of the algae as DIN increased. N and P enrichment experiments showed that rate of macroalgal growth was controlled by supply of DIN where ambient DIN concentrations were low, and by P where DIN concentrations were higher, regardless of latitude or geographic setting. These results suggest that understanding the basis for macroalgal blooms, and management of these harmful phenomena, will require information as to nutrient sources, and actions to reduce supply of N and P in coastal waters concerned.Fil: Teichberg, Mirta. Leibniz Center For Tropical Marine Research; AlemaniaFil: Fox, Sophia E.. Marine Biological Laboratory; Estados UnidosFil: Olsen, Ylva S.. Bangor University; Reino UnidoFil: Valiela, Ivan. Marine Biological Laboratory; Estados UnidosFil: Martinetto, Paulina Maria del Rosario. Universidad Nacional de Mar del Plata; ArgentinaFil: Iribarne, Oscar Osvaldo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mar del Plata. Instituto de Investigaciones Marinas y Costeras. Universidad Nacional de Mar del Plata. Facultad de Ciencias Exactas y Naturales. Instituto de Investigaciones Marinas y Costeras; ArgentinaFil: Muto, Elizabeti Yuriko. Universidade de Sao Paulo; BrasilFil: Petti, Monica A.V.. Universidade de Sao Paulo; BrasilFil: Corbisier, Thaïs N.. Universidade de Sao Paulo; BrasilFil: Soto-Jiménez, Martín. Universidad Nacional Autónoma de México; MéxicoFil: Páez-Osuna, Federico. Universidad Nacional Autónoma de México; MéxicoFil: Castro, Paula. University Of Coimbra; BrasilFil: Freitas, Helena. University Of Coimbra; BrasilFil: Zitelli, Andreina. Università Iuav Di Venezia; ItaliaFil: Cardinaletti, Massimo. Gruppo Veritas; ItaliaFil: Tagliapietra, Davide. Consiglio Nazionale delle Ricerche; Itali

Two-Loop Helicity Amplitudes for Quark-Quark Scattering in QCD and Gluino-Gluino Scattering in Supersymmetric Yang-Mills Theory

We present the two-loop QCD helicity amplitudes for quark-quark and quark-antiquark scattering. These amplitudes are relevant for next-to-next-to-leading order corrections to (polarized) jet production at hadron colliders. We give the results in the `t Hooft-Veltman and four-dimensional helicity (FDH) variants of dimensional regularization and present the scheme dependence of the results. We verify that the finite remainder, after subtracting the divergences using Catani's formula, are in agreement with previous results. We also provide the amplitudes for gluino-gluino scattering in pure N=1 supersymmetric Yang-Mills theory. We describe ambiguities in continuing the Dirac algebra to D dimensions, including ones which violate fermion helicity conservation. The finite remainders after subtracting the divergences using Catani's formula, which enter into physical quantities, are free of these ambiguities. We show that in the FDH scheme, for gluino-gluino scattering, the finite remainders satisfy the expected supersymmetry Ward identities.Comment: arXiv admin note: substantial text overlap with arXiv:hep-ph/030416

Two-Loop Helicity Amplitudes for Quark-Gluon Scattering in QCD and Gluino-Gluon Scattering in Supersymmetric Yang-Mills Theory

We present the two-loop QCD helicity amplitudes for quark-gluon scattering, and for quark-antiquark annihilation into two gluons. These amplitudes are relevant for next-to-next-to-leading order corrections to (polarized) jet production at hadron colliders. We give the results in the `t Hooft-Veltman and four-dimensional helicity (FDH) variants of dimensional regularization. The transition rules for converting the amplitudes between the different variants are much more intricate than for the previously discussed case of gluon-gluon scattering. Summing our two-loop expressions over helicities and colors, and converting to conventional dimensional regularization, gives results in complete agreement with those of Anastasiou, Glover, Oleari and Tejeda-Yeomans. We describe the amplitudes for 2 to 2 scattering in pure N=1 supersymmetric Yang-Mills theory, obtained from the QCD amplitudes by modifying the color representation and multiplicities, and verify supersymmetry Ward identities in the FDH scheme.Comment: 77 pages. v2: corrected errors in eqs. (3.7) and (3.8) for one-loop assembly; remaining results unaffecte

Two-magnon Raman scattering in insulating cuprates: Modifications of the effective Raman operator

Calculations of Raman scattering intensities in spin 1/2 square-lattice Heisenberg model, using the Fleury-Loudon-Elliott theory, have so far been unable to describe the broad line shape and asymmetry of the two magnon peak found experimentally in the cuprate materials. Even more notably, the polarization selection rules are violated with respect to the Fleury-Loudon-Elliott theory. There is comparable scattering in $B_{1g}$ and $A_{1g}$ geometries, whereas the theory would predict scattering in only $B_{1g}$ geometry. We review various suggestions for this discrepency and suggest that at least part of the problem can be addressed by modifying the effective Raman Hamiltonian, allowing for two-magnon states with arbitrary total momentum. Such an approach based on the Sawatzsky-Lorenzana theory of optical absorption assumes an important role of phonons as momentum sinks. It leaves the low energy physics of the Heisenberg model unchanged but substantially alters the Raman line-shape and selection rules, bringing the results closer to experiments.Comment: 7 pages, 6 figures, revtex. Contains some minor revisions from previous versio

A Real Space Description of Field Induced Melting in the Charge Ordered Manganites: II. the Disordered Case

We study the effect of A site disorder on magnetic field induced melting of charge order (CO) in half doped manganites using a Monte-Carlo technique. Strong A-site disorder destroys CO even without an applied field. At moderate disorder, the zero field CO state survives but has several intriguing features in its field response. Our spatially resolved results track the broadening of the field melting transition due to disorder and explain the unusual dependence of the melting scales on bandwidth and disorder. In combination with our companion paper on field melting of charge order in clean systems we provide an unified understanding of CO melting across all half doped manganites.Comment: 9 pages, pdflatex, 10 embedded png fig

Dried brewers grains in growing rabbits: nutritional value and effects on performance

[EN] Two assays were carried out to determine i) the nutritional value of dried brewers’ grains and ii) the effects of inclusion of this ingredient in growing rabbit diets on animal performance and economic performance of the breeding unit. In the digestibility assay, a total of 28 male rabbits were distributed in 2 groups differing in the diet offered to animals: a reference diet (35.51% neutral detergent fibre and 16.50% crude protein [CP]) and a test diet (60% of reference diet and 40% of dried brewers grains). The dried brewers’ grain contained 37.9% of CP and 3371 kcal digestible energy/kg dry matter. In the performance study, 80 weaned rabbits (40 males and 40 females) were allotted at 40 d of age to 5 groups differing in the inclusion levels of dried brewers’ grains (0, 7, 14, 21 and 28%) from 40 d to 90 d of age. Inclusion of dried brewers’ grains did not affect the live weight at 90 d, the feed intake between 40 d and 90 d or the dressing percentage of rabbits (on average 223 g, 96 g/d and 51.3%, respectively). There was no effect of diet on the meat quality parameters (69.5% water holding capacity, 25.6% cooking loss, 3.4 kg/cm2 Warner-Bratzler shear force and pH 5.70) and inclusion levels above 14% reduced the feed cost (–18%; P<0.001), while inclusion above 21% improved net income (+32%; P<0.001). In conclusion, these results suggest that the use of dried brewers’ grains in diets for growing rabbits could improve the economic performance of the production system without impairing the animals’ performance.Lima, P.; Watanabe, P.; Cândido, R.; Ferreira, A.; Vieira, A.; Rodrigues, B.; Nascimento, G.... (2017). Dried brewers grains in growing rabbits: nutritional value and effects on performance. World Rabbit Science. 25(3):251-260. doi:10.4995/wrs.2017.6813.SWORD251260253Albuquerque, D. M. N., Lopes, J. B., Klein Junior, M. H., Merval, R. R., Silva, F. E. S., & Teixeira, M. P. F. (2011). Resíduo desidratado de cervejaria para suínos em terminação. Arquivo Brasileiro de Medicina Veterinária e Zootecnia, 63(2), 465-472. doi:10.1590/s0102-09352011000200026AOAC International. 2005. Official methods of analysis of Association Official Analytical Chemists International. AOAC, Arlington VA. USA.Briganó, M. V., Pacheco, G. D., Bridi, A. M., Oba, A., Fonseca, N. A. N., & Silva, C. A. da. (2008). Desempenho e características de carcaça de suínos submetidos a diferentes programas de restrição alimentar na fase dos 30 aos 118 kg. Revista Brasileira de Zootecnia, 37(8), 1398-1404. doi:10.1590/s1516-35982008000800009De Blas, J. C., Rodriguez, C. A., Bacha, F., Fernandez, R., & Abad-Guamán, R. (2015). Nutritive value of co-products derived from olivecake in rabbit feeding. World Rabbit Science, 23(4), 255. doi:10.4995/wrs.2015.4036Etchu K.A., Humbu M.E., Ndamukong K.J.N., Agbor E.B. 2012. Effect of varying levels of brewers' dried grain on the growth performance of weaner rabbits (Oryctolagus Cuniculus). Greener J. Agric. Sci., 2: 237-245.Fazano A.R.T., Zinsly C.F., Mattos W.R.S., Packer I.H. 1986. Digestibilidade e valor biológico da proteína da levedura seca (Saccharomyces spp.) e do farelo de soja para coelhos. Boletim de Indústria Animal, 46: 185-191.Lounaouci-Ouyaed G., Lakabi-ioualitene D., Berchiche M., Lebas F. 2008. Field beans and brewers grain as protein source for growing rabbits in Algeria: first results on growth and carcass quality. Nutrition and Digestive Physiology. In: 9th World Rabbit Congress, June 10-13, Verona, Italy. 723-728.Matterson L.D., Potter L.M., Stutz M.W., Singsen E.P. 1965. The metabolizable energy of feed ingredients for chickens. Storrs: University of Connecticut; Agricultural Experiment Station Research Report, 11: 11.National Research Council. 2007. Nutrient requirements of small ruminants: sheep, goats, cervids, and New World camelids. Washington, D.C.: National Academic Press, 292.Partridge G., Wyatt C. 1995. More flexibility with new generation of enzymes. World Poultry,11: 17-21.SAS 2000. SAS/STAT User's Guide (Release 6.12). SAS Inst. Inc., Cary NC, EUA.Villamide, M. J. (1996). Methods of energy evaluation of feed ingredients for rabbits and their accuracy. Animal Feed Science and Technology, 57(3), 211-223. doi:10.1016/0377-8401(95)00855-

Rheological and Textural Analyses

LA/P/0140/2020Biobased raw materials like natural polysaccharides are increasingly sought by the cosmetic industry for their valuable properties. Such biodegradable and usually non-cytotoxic biopolymers are commonly used in skin-care products as rheological modifiers, bioemulsifiers and/or bioactive ingredients. FucoPol is a natural polysaccharide with reported biocompatibility, emulsion-forming and stabilizing capacity, shear-thinning behavior and bioactivity (e.g., antioxidant capacity, wound healing ability) that potentiate its utilization in skin-care products. In this study, olive oil and α-tocopherol containing emulsions were stabilized with FucoPol. Although the presence of α-tocopherol negatively impacted the emulsions’ stability, it increased their emulsification index (EI). Moreover, FucoPol outperformed the commercial emulsifier Sepigel® 305, under the tested conditions, with higher EI and higher stability under storage for 30 days. The formulation of FucoPol-based emulsions with olive oil and α-tocopherol was studied by Response Surface Methodology (RSM) that allowed the definition of the ingredients’ content to attain high emulsification. The RSM model established that α-tocopherol concentration had no significant impact on the EI within the tested ranges, with optimal emulsification for FucoPol concentration in the range 0.7–1.2 wt.% and olive oil contents of 20–30 wt.%. Formulations with 25 wt.% olive oil and either 0.5 or 2.0 wt.% α-tocopherol were emulsified with 1.0 wt.% or 0.7 wt.% FucoPol, respectively, resulting in oil-in-water (O/W) emulsions. The emulsions had similar shear-thinning behavior, but the formulation with higher FucoPol content displayed higher apparent viscosity, higher consistency, as well as higher firmness, adhesiveness and cohesiveness, but lower spreadability. These findings show FucoPol’s high performance as an emulsifier for olive oil/α-tocopherol, which are supported by an effective impact on the physicochemical and structural characteristics of the emulsions. Hence, this natural polysaccharide is a potential alternative to other emulsifiers.publishersversionpublishe

Environmental assessment of industrial production of microalgal biodiesel in central-south Chile

Biofuels from microalgae have the potential to replace fossil fuels, without competing with other products derived from crops. This study aims to perform a cradle-to-gate Life Cycle Assessment of the industrial production of microalgal biodiesel, using an autochthonous Chilean Phaeodactylum tricornutum strain, considering 1 MJ of biodiesel as the functional unit. For the compilation of the Life Cycle Inventory, real experimental data were obtained from the pilot-scale cultivation in a photobioreactor (PBR) module located in the city of Concepción, in Chile. The scale-up to the industrial plant considers that PBR modules are of the same size as those used in the pilot-scale. The Life Cycle Impacts Analysis considered the ReCiPe 2016 Endpoint (H) V1.00 method. Results show that the whole process contributes to a total of 5.74 kgCO2eq per MJ of biodiesel produced. PBR construction materials and energy consumption are the main contributors to the life cycle environmental impacts. The sensitivity analysis shows that energy consumption, water reuse and transportation distance of seawater from ocean to the industrial plant are the critical parameters that most affect the overall environmental performance of the system. The rate of water reuse is particularly critical to the global warming potential. Results also show that the valorization of co-products is an important aspect to improve the environmental performance of microalgal biodiesel production. Therefore, this study supports the decision-making process in biofuel production to promote the development of sustainable pilot and large-scale algae-based industry.publishe

Characterization of the Thermostable Biosurfactant Produced by Burkholderia thailandensis DSM 13276

Funding Information: Technology: 31961133015; Shandong University: 31961133014). C.V.G., A.E. and A.T.R. acknowledge FCT I.P. for the Ph.D. grants 2021.05798.BD, 2021.05014.BD and 2020.06470.BD, respectively. Funding Information: ThTeh ethgelrymcoalli pstoapbeilpittyid oef bthioesuBr. ftahcatialanntdseencsriestbediobsuyrBfaucrtkahnotl dweraisa ethvaailluanatdeedn sbisyD exSpMos1i3n2g7 6 thwe absiodpeomlyomnsetrr aitne danto apquosesoeusss svoalluutaiobnle tsou raf atecme-apcetriavteuprer oopfe 1r2ti1e s°,Cnainm aenly ,aautloowclaCvMe (C0.9a8nd bar) for 20 min. Interestingly, the treated solution maintained its shear-thinning behavior, with a slight increase in the flow behavior index value (0.46) compared to the untre◦ ated biosurfactant solution (0.44) (refer to Figure S4 for supporting information on fitting the power law model). The thermally treated biosurfactant also maintained a surface tension value of 40.36 ± 0.5 mN/m, which was identical to that of the untreated solution (40.31 ± 0.agent26 mNin/mfood), thus conand/orfirmcosmeticing its prthermoducts/pral stabocessing,ility. and for bioremediation. The emulsifying ability of the treated biosurfactant, on the other hand, was negatively affected, with a reduction in the EA to 50.5 ± 0.9%, which is around half of the value observed for the non-treated biosurfactant (100.0 ± 0.0%). Different biosurfactants (e.g., glAyucothliopridCso)n atrlisbousthioonws:eCdoan scleipgthuta dliezcartieoans,eC i.nV.tGh.e, eF.mF.ualnsdifyCi.nAg.Vc.aTp.;amciettyhoadftoelroghye,aCt .tVre.Ga.t,mAe.Tn.tR ., at similar temperatures [64]. Nevertheless, the value is still within the range reported for good EA (≥50%) [59]. Moreover, Triton X-100 also suffered a similar reduction in its emulsification ability, as the EA of the emulsions stabilized with the autoclaved compound also reduced from 43.9 ± 2.1% to 33.4 ± 5.2%. These results underline the potential of the B. thIa.Pil.a, nindetnhseisscboipoesuorfftahcetapnrot jfeocrts uUseID, fPo/r0e4x37a8m/p20le20, ianntdheU fIDooBd/ 0i4n3d7u8/st2r0y2,0 inofwthheicRhestheaercthemUpneitr-on atAuprepslieadreMeolleevcuatlaerdBdiouscriienngcepsr—oUceCsIsBiInOgaonrd tthhee fpirnoajelcpt rLoAd/uPc/t0 i1s40c/o2n0s2u0mofetdh.e Associate Laboratory Institute for Health and Bioeconomy—i4HB, and by the European Union’s Horizon 2020 research and 4. Coninnovcalustionioprnos gram through Project Bio Innovation of a Circular Economy for Plastics (BioICEP), under The glycolipopeptide biosurfactant secreted by Burkholderia thailandensis DSM 13276 numbers: Institute of Microbiology, Chinese Academy of Sciences: 31961133016; Beijing Institute of was demonstrated to possess valuable surface-active properties, namely, a low CMC and high EA for almond and sunflower oils, and for benzene. Moreover, the biosurfactant showed good thermostability, with a thermal degradation temperature above 200 °C, and the ability to maintain stable rheological and surface-active properties, as well as good EA Publisher Copyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland.Biosurfactants synthesized by microorganisms represent safe and sustainable alternatives to the use of synthetic surfactants, due to their lower toxicity, better biodegradability and biocompatibility, and their production from low-cost feedstocks. In line with this, the present study describes the physical, chemical, and functional characterization of the biopolymer secreted by the bacterium Burkholderia thailandensis DSM 13276, envisaging its validation as a biosurfactant. The biopolymer was found to be a glycolipopeptide with carbohydrate and protein contents of 33.1 ± 6.4% and 23.0 ± 3.2%, respectively. Galactose, glucose, rhamnose, mannose, and glucuronic acid were detected in the carbohydrate moiety at a relative molar ratio of 4:3:2:2:1. It is a high-molecular-weight biopolymer (1.0×107Da) with low polydispersity (1.66), and forms aqueous solutions with shear-thinning behavior, which remained after autoclaving. The biopolymer has demonstrated a good emulsionstabilizing capacity towards different hydrophobic compounds, namely, benzene, almond oil, and sunflower oil. The emulsions prepared with the biosurfactant, as well as with its autoclaved solution, displayed high emulsification activity (>90% and ~50%, respectively). Moreover, the almond and sunflower oil emulsions stabilized with the biosurfactant were stable for up to 4 weeks, which further supports the potential of this novel biopolymer for utilization as a natural bioemulsifier.publishersversionpublishe