The CosmicWatch Desktop Muon Detector: a self-contained, pocket sized particle detector

The CosmicWatch Desktop Muon Detector is a self-contained, hand-held cosmic ray muon detector that is valuable for astro/particle physics research applications and outreach. The material cost of each detector is under $100 and it takes a novice student approximately four hours to build their first detector. The detectors are powered via a USB connection and the data can either be recorded directly to a computer or to a microSD card. Arduino- and Python-based software is provided to operate the detector and an online application to plot the data in real-time. In this paper, we describe the various design features, evaluate the performance, and illustrate the detectors capabilities by providing several example measurements.Comment: 11 pages, 8 figure

Surface Engineering for Phase Change Heat Transfer: A Review

Among numerous challenges to meet the rising global energy demand in a sustainable manner, improving phase change heat transfer has been at the forefront of engineering research for decades. The high heat transfer rates associated with phase change heat transfer are essential to energy and industry applications; but phase change is also inherently associated with poor thermodynamic efficiencies at low heat flux, and violent instabilities at high heat flux. Engineers have tried since the 1930's to fabricate solid surfaces that improve phase change heat transfer. The development of micro and nanotechnologies has made feasible the high-resolution control of surface texture and chemistry over length scales ranging from molecular levels to centimeters. This paper reviews the fabrication techniques available for metallic and silicon-based surfaces, considering sintered and polymeric coatings. The influence of such surfaces in multiphase processes of high practical interest, e.g., boiling, condensation, freezing, and the associated physical phenomena are reviewed. The case is made that while engineers are in principle able to manufacture surfaces with optimum nucleation or thermofluid transport characteristics, more theoretical and experimental efforts are needed to guide the design and cost-effective fabrication of surfaces that not only satisfy the existing technological needs, but also catalyze new discoveries

Patients’ Radiation Doses During the Implantation of Stents in Carotid, Renal, Iliac, Femoral and Popliteal Arteries

AbstractObjectives and DesignThe aim of the study was to document the radiation doses to patients during the implantation of stents in various arteries and to discuss potential reasons for prolongation of radiological procedures.Materials and MethodsMeasurements of air kerma (Gy) and dose–area product (Gy cm2) (DAP) were carried out simultaneously on a sample of 345 patients, who underwent different interventional radiological procedures involving angioplasty with stenting of 73 carotid (21.5%), 22 renal (6.5%), 160 iliac (45%), 63 femoral (18.6%) and 27 popliteal (7.9%) arteries.ResultsThe highest mean air kerma values for fluoroscopy and exposure were found for renal angioplasty (340 and 420 mGy, respectively). With regard to total DAP values, the highest were obtained for renal (148 Gy cm2) and iliac/The Inter-Society Consensus for Management of Peripheral Arterial Disease (TASC) II C (199 Gy cm2) stent implantation. The lowest values were for carotid (53 Gy cm2), iliac/TASC II A (6.3 Gy cm2) and femoral/TASC II A (53 Gy cm2) arteries. For 3.5% of the patients, the air kerma was between 1 and 1.5 Gy and for 1.5%, it was between 1.5 and 2 Gy.ConclusionsIn procedures performed on the arteries of the lower limbs, a significantly higher dose was received by patients with TASC II C lesions. With regard to the number of stents implanted, the total DAP value was 50% higher for simultaneous three-stent implantation than for one or two stents

Surface engineering for phase change heat transfer: A review

Owing to advances in micro- and nanofabrication methods over the last two decades, the degree of sophistication with which solid surfaces can be engineered today has caused a resurgence of interest in the topic of engineering surfaces for phase change heat transfer. This review aims at bridging the gap between the material sciences and heat transfer communities. It makes the argument that optimum surfaces need to address the specificities of phase change heat transfer in the way that a key matches its lock. This calls for the design and fabrication of adaptive surfaces with multiscale textures and non-uniform wettability. Among numerous challenges to meet the rising global energy demand in a sustainable manner, improving phase change heat transfer has been at the forefront of engineering research for decades. The high heat transfer rates associated with phase change heat transfer are essential to energy and industry applications; but phase change is also inherently associated with poor thermodynamic efficiency at low heat flux, and violent instabilities at high heat flux. Engineers have tried since the 1930s to fabricate solid surfaces that improve phase change heat transfer. The development of micro and nanotechnologies has made feasible the high-resolution control of surface texture and chemistry over length scales ranging from molecular levels to centimeters. This paper reviews the fabrication techniques available for metallic and silicon-based surfaces, considering sintered and polymeric coatings. The influence of such surfaces in multiphase processes of high practical interest, e.g., boiling, condensation, freezing, and the associated physical phenomena are reviewed. The case is made that while engineers are in principle able to manufacture surfaces with optimum nucleation or thermofluid transport characteristics, more theoretical and experimental efforts are needed to guide the design and cost-effective fabrication of surfaces that not only satisfy the existing technological needs, but also catalyze new discoverie

Search for astronomical neutrinos from blazar TXS 0506+056 in super-kamiokande

We report a search for astronomical neutrinos in the energy region from several GeV to TeV in the direction of the blazar TXS 0506+056 using the Super-Kamiokande detector following the detection of a 100 TeV neutrinos from the same location by the IceCube collaboration. Using Super-Kamiokande neutrino data across several data samples observed from 1996 April to 2018 February we have searched for both a total excess above known backgrounds across the entire period as well as localized excesses on smaller timescales in that interval. No significant excess nor significant variation in the observed event rate are found in the blazar direction. Upper limits are placed on the electron- and muon-neutrino fluxes at the 90% confidence level as 6.0 × 10−7 and 4.5 × 10−7–9.3 × 10−10 [erg cm−2 s−1], respectively

Theia: an advanced optical neutrino detector

New developments in liquid scintillators, high-efficiency, fast photon detectors, and chromatic photon sorting have opened up the possibility for building a large-scale detector that can discriminate between Cherenkov and scintillation signals. Such a detector could reconstruct particle direction and species using Cherenkov light while also having the excellent energy resolution and low threshold of a scintillator detector. Situated deep underground, and utilizing new techniques in computing and reconstruction, this detector could achieve unprecedented levels of background rejection, enabling a rich physics program spanning topics in nuclear, high-energy, and astrophysics, and across a dynamic range from hundreds of keV to many GeV. The scientific program would include observations of low- and high-energy solar neutrinos, determination of neutrino mass ordering and measurement of the neutrino CP-violating phase δ, observations of diffuse supernova neutrinos and neutrinos from a supernova burst, sensitive searches for nucleon decay and, ultimately, a search for neutrinoless double beta decay, with sensitivity reaching the normal ordering regime of neutrino mass phase space. This paper describes Theia, a detector design that incorporates these new technologies in a practical and affordable way to accomplish the science goals described above

Evolutionary winners are ecological losers among oceanic island plants

Aim Adaptive radiation, in which successful lineages proliferate by exploiting untapped niche space, provides a popular but potentially misleading characterization of evolution on oceanic islands. Here we analyse the respective roles of members of in situ diversified vs. non-diversified lineages in shaping the main ecosystems of an archipelago to explore the relationship between evolutionary and ecological ‘success’. Location Canary Islands. Taxon Vascular plants. Methods We quantified the abundance/rarity of the native flora according to the geographical range (number of islands where present and geographical extent of the range), habitat breadth (climatic niche) and local abundance (cover) using species distribution data based on 500 × 500 m grid cells and 2000 vegetation inventories located all over the archipelago. Results Species of diversified lineages have significantly smaller geographic ranges, narrower climatic niches and lower local abundances than those of non-diversified lineages. Species rarity increased with the degree of diversification. The diversified Canarian flora is mainly comprised by shrubs. At both archipelagic and island level, the four core ecosystems (Euphorbia scrub, thermophilous woodlands, laurel forest and pine forest) were dominated by non-diversified lineages species, with diversified lineages species providing <25% cover. Species of diversified lineages, although constituting 54% of the archipelagic native flora, were only abundant in two rare ecosystems: high mountain scrub and rock communities. Main conclusions Radiated species, endemic products of in situ speciation, are mostly rare in all three rarity axes and typically do not play an important role in structuring plant communities on the Canaries. The vegetation of the major ecosystem types is dominated by plants representing non-diversified lineages (species that derive from immigration and accumulation), while species of evolutionarily successful lineages are abundant only in marginal habitats and could, therefore, be considered ecological losers. Within this particular oceanic archipelago, and we posit within at least some others, evolutionary success in plants is accomplished predominantly at the margins.publishedVersio