Fabrication, characterization and implementation of thermo resistive TiCu(N,O) thin films in a polymer injection mold

This paper presents the development of metallic thermoresistive thin film, providing an innovative solution to dynamically control the temperature during the injection molding process of polymeric parts. The general idea was to tailor the signal response of the nitrogen- and oxygen-doped titanium-copper thin film (TiCu(N,O))-based transducers, in order to optimize their use in temperature sensor devices. The results reveal that the nitrogen or oxygen doping level has an evident effect on the thermoresistive response of TiCu(N,O) films. The temperature coefficient of resistance values reached 2.29 × 10−2 °C−1, which was almost six times higher than the traditional platinum-based sensors. In order to demonstrate the sensing capabilities of thin films, a proof-of-concept experiment was carried out, integrating the developed TiCu(N,O) films with the best response in an injection steel mold, connected to a data acquisition system. These novel sensor inserts proved to be sensitive to the temperature evolution during the injection process, directly in contact with the polymer melt in the mold, demonstrating their possible use in real operation devices where temperature profiles are a major parameter, such as the injection molding process of polymeric parts.This work was supported by the project SAM—Smart Active Mold (contract ANI—33/SI/2015) by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UID/FIS/04650/2019, and from the Basque Government Industry Department under the ELKARTEK and HAZITEK programs

Prevalence, incidence and distribution of citrus variegated chlorosis in Bahia, Brazil

Citrus variegated chlorosis (CVC) is one of the most important diseases for Brazilian citriculture. It is caused by Xylella fastidiosa subsp. pauca, a xylem limited, cycadelid and budwood transmitted bacterium. In Bahia, the second most important citrus region in Brazil, CVC has been present since 1997. Our objectives were to characterize the regional spatial pattern of CVC and to establish a relationship between epidemiological variables and horticultural practices, as well as to evaluate whether control measures used so far have been effective and, based on that, to conceive suitable control measures. A series of surveys were performed in two regions of Bahia State (Recôncavo Baiano and Litoral Norte), along with a survey of horticultural and control practices associated with sampled groves. CVC was restricted to Litoral Norte region, especially to three municipalities along the border between Bahia and Sergipe States. The mean CVC incidence in these municipalities followed a gradient, higher in the countryside and decreasing along the coast. Presence and dissemination of CVC was related to poor nursery practices, a massive use of a susceptible orange variety, and an extreme concentration of orange groves in high incidence municipalities, as well as to the absence of specific CVC control. Considering that CVC was not found in Recôncavo Baiano, this region could be considered a "CVC free zone" by the local government. Copyright by the Brazilian Phytopathological Society.EC/ICA4-CT-2001-10005CNPqFAPES

Structural mechanical simulation to optimize the sensor arm geometry to be implemented on cranial remodeling orthosis

For the treatment of moderate and severe cases of deformational plagiocephaly, an asymmetrical deformation of the skull, a cranial remodeling orthosis (CRO) is used. For the development of a new CRO concept, a pressure sensor grid is placed inside the orthosis that will allow the monitoring of excessive pressures and incorrect CRO positioning throughout the treatment. To implement the sensor grid in the CRO, high mobility of the sensor arms structure that joins the several sensors of this grid is required, however, it is intended that this procedure does not damage the printed copper tracks on the sensor structure. In this study, computer simulations were performed to optimize the sensor arm structure geometry, minimizing undesirable mechanical behavior in the sensor structure when subjected to tensile forces and displacements applied during its placement in the CRO. It was observed that the different sensor arm structures geometries have different effects on the mechanical behavior of the sensor structure when subjected to tensile forces and tensile displacement. The zigzag curve geometry presents the best performance based on high mobility without intense strain on the structure that could damage the printed copper tracks.511F-603F-4B30 | Francisco MirandaN/

Germline MUTYH (MYH) mutations in portuguese individuals with multiple colorectal adenomas

Germinal mutations in the base excision repair (BER) gene MUTYH (MYH) have recently been described in association with predisposition to multiple colorectal adenomas and cancer. In contrast to the classic dominant condition of familial adenomatous polyposis (FAP) due to germinal mutations in the APC gene, the MYH polyposis is an autosomal recessive disease. The identification of individuals affected by MYH polyposis brings new and important implications for the diagnostic, screening, genetic counseling, follow up and therapeutic options in these patients. In this study, screening for germinal mutations in the MYH gene was performed in 53 Portuguese individuals with multiple colorectal adenomas or classic adenomatous polyposis, in whom no mutation had been identified in the APC gene. The results revealed the presence of biallelic germline MYH mutations in 21 patients. In addition, we here report 3 mutations (c.340T>C [p.Y114H]; c.503G>A [p.R168H]; and c.1186_1187insGG [p.E396fsX437]) which, to our knowledge, have not been previously described. © 2004 Wiley-Liss, Incinfo:eu-repo/semantics/publishedVersio

Reaching the Hard-to-Reach: A Probability Sampling Method for Assessing Prevalence of Driving under the Influence after Drinking in Alcohol Outlets

Drinking alcoholic beverages in places such as bars and clubs may be associated with harmful consequences such as violence and impaired driving. However, methods for obtaining probabilistic samples of drivers who drink at these places remain a challenge – since there is no a priori information on this mobile population – and must be continually improved. This paper describes the procedures adopted in the selection of a population-based sample of drivers who drank at alcohol selling outlets in Porto Alegre, Brazil, which we used to estimate the prevalence of intention to drive under the influence of alcohol. The sampling strategy comprises a stratified three-stage cluster sampling: 1) census enumeration areas (CEA) were stratified by alcohol outlets (AO) density and sampled with probability proportional to the number of AOs in each CEA; 2) combinations of outlets and shifts (COS) were stratified by prevalence of alcohol-related traffic crashes and sampled with probability proportional to their squared duration in hours; and, 3) drivers who drank at the selected COS were stratified by their intention to drive and sampled using inverse sampling. Sample weights were calibrated using a post-stratification estimator. 3,118 individuals were approached and 683 drivers interviewed, leading to an estimate that 56.3% (SE = 3,5%) of the drivers intended to drive after drinking in less than one hour after the interview. Prevalence was also estimated by sex and broad age groups. The combined use of stratification and inverse sampling enabled a good trade-off between resource and time allocation, while preserving the ability to generalize the findings. The current strategy can be viewed as a step forward in the efforts to improve surveys and estimation for hard-to-reach, mobile populations

Cuidados biomédicos de saúde em Angola e na Companhia de Diamantes de Angola, c. 1910-1970

Pretende-se caracterizar a prestação de cuidados biomédicos em Angola durante a atividade da Companhia de Diamantes de Angola. Uma análise comparativa de políticas e práticas de saúde pública de vários atores coloniais, como os serviços de saúde da Companhia, sua congénere do Estado e outras empresas coloniais, revelará diferenças de investimento na saúde, isto é, instalações e pessoal de saúde, e tratamentos. Este escrutínio bem como as condições de vida iluminarão o carácter idiossincrático e central dos serviços de saúde da Companhia em termos de morbimortalidade em Angola, e a centralidade destes para as representações de um império cuidador