Revue sur l'enlèvement des métaux des effluents par adsorption sur la sciure et les écorces de bois

Les résidus de transformation du bois tels les écorces et la sciure de bois ont été largement étudiés depuis quelques années pour leur propriété d'adsorption et d'enlèvement des métaux toxiques contenus dans les effluents contaminés. En ce qui concerne la sciure de bois, les recherches répertoriées ont porté principalement sur l'utilisation du sapin rouge, du manga, du tilleul, de l'épinette, du pin, du cèdre, du teck, de l'akamatsu et du buna. Pour ce qui est des écorces de bois, plusieurs espèces ont été étudiées, notamment les écorces de pin, de chêne et d'épinette. La présente revue fait le point sur les performances de ces différents adsorbants peu coûteux pour l'adsorption des principaux métaux contaminants (Cd, Cr, Cu, Hg, Ni, Pb et Zn). Les points discutés portent sur les méthodes de préparation (lavage, séchage et tamisage) et de traitement chimique de l'adsorbant (traitement acide ou basique, traitement à la formaldéhyde, phosphatation, carboxylation, sulfoéthylation, carboxyméthylation, etc.), les conditions opératoires utilisées lors de l'adsorption, les modèles thermodynamiques, cinétiques et autres applicables au couple adsorbant-adsorbat, l'effet des principaux paramètres opératoires (temps de contact, pH de traitement, température, concentration d'adsorbant, taille des particules, etc.), les principes et les mécanismes impliqués dans l'élimination des contaminants métalliques par les adsorbants présentés.Wood industry by-products such as barks and sawdusts have been widely studied in recent years for their property of metal adsorption and metal removal from contaminated effluents. Concerning the utilization of sawdusts, many researchers have studied metal adsorption on material from species such as red fir, mango, lime, pine, cedar, teak, Japanese red pine and Japanese beech. As regards wood barks, several species were studied, in particular pine, oak and spruce. The present review gives a progress report on the efficiency of these various inexpensive materials for the adsorption of different metals (Cd, Cr, Cu, Hg, Ni, Pb and Zn). The points discussed relate to the preparation methods (washing, drying, screening) and the chemical treatments of the adsorbents (acid or base treatment, formaldehyde treatment, phosphatation, carboxylation, sulfoethylation, carboxymethylation, etc.). We also consider the operating conditions used during adsorption, the thermodynamic, kinetic and other models applicable to the adsorbent-adsorbate couple, the effect of the operational parameters (time of contact, pH, temperature, adsorbent concentration, particle size, etc.), as well as the principles and mechanisms involved in metal removal by the adsorbents.The accumulation of organic or inorganic matter at the solid-liquid interface is the basis of almost all surface reactions. Adsorption is often a process described in terms of isotherms, which represent the relationship between the concentration of a solute in solution and the quantity adsorbed at the surface at constant temperature. The isotherms are often used to establish the maximum adsorption capacity of a given adsorbent for metals. Langmuir and Freundlich isotherms are the most frequently used and their models are presented in this review.Knowledge of adsorption parameters is essential for understanding the adsorption mechanisms involved. Usually, the maximum adsorption capacity for sawdusts and barks is reached after one hour. The pH of the ambient water is a very important parameter because it affects the metal adsorption capacities. For most of the metals studied, the adsorption capacity increases when the pH increases. The opposite effect is observed for metals involved in an anionic complex (Cr, Se, Pt, Au). Metal adsorption efficiency also improves with increases in substrate concentration because there are more available adsorption sites. Metal adsorption is affected by an another important factor, the particle size. In effect, a smaller size particle increases the specific surface and improves the adsorption capacity. The presence of anions in the effluent doesn't appear to have a great effect on adsorption results with sawdusts. However, some anions were reported to have an influence on the metal adsorption capacities of barks. In the case of a metal mixture, the presence of one metal may influence, compete or exclude the recovery of another metal from the solution.Sawdusts contain lignin, cellulose, tannin and protein. Wood tannin likely serves as a primary adsorption site for divalent cations. The application of chemical treatments on sawdusts could modify the lignin functional groups. Other studies regarding the participation of major components of barks (lignin, carbohydrate and protein) in the adsorption process revealed the involvement of amine and carboxyl functional groups. The proposed mechanism involves an ion-exchange process. This phenomenon suggests that cationic exchange is the active mechanism for some wood species, in agreement with the work of some researchers.Currently, only a few industries use plant biomass to eliminate metals in wastewater. To encourage industries to use this biotechnology, research has to be oriented towards the cheapest and most competitive process rather than the current and conventional process. Forest waste products are produced in large quantities in several countries. They constitute easily-available resources of low cost. Future research in this field should be focused on cheap new chemical treatments to apply to by-products to improve their adsorption capacities

Immobilisation of electrochemically active bacteria on screen-printed electrodes for rapid in situ toxicity biosensing

Microbial biosensors can be an excellent alternative to classical methods for toxicity monitoring, which are time-consuming and not sensitive enough. However, bacteria typically connect to electrodes through biofllm formation, leading to problems due to lack of uniformity or long device production times. A suitable immobilisation technique can overcome these challenges. Still, they may respond more slowly than biofllm-based electrodes because bacteria gradually adapt to electron transfer during biofllm formation. In this study, we propose a controlled and reproducible way to fabricate bacteria-modified electrodes. The method consists of an immobilisation step using a cellulose matrix, followed by an electrode polarization in the presence of ferricyanide and glucose. Our process is short, reproducible and led us to obtain ready-to-use electrodes featuring a high-current response. An excellent shelf-life of the immobilised electrochemically active bacteria was demonstrated for up to one year. After an initial 50% activity loss in the first month, no further declines have been observed over the following 11 months. We implemented our bacteria-modified electrodes to fabricate a lateral flow platform for toxicity monitoring using formaldehyde (3%). Its addition led to a 59% current decrease approximately 20 min after the toxic input. The methods presented here offer the ability to develop a high sensitivity, easy to produce, and long shelf life bacteria-based toxicity detectors. (C) 2020 The Author(s). Published by Elsevier B.V. on behalf of Chinese Society for Environmental Sciences, Harbin Institute of Technology, Chinese Research Academy of Environmental Sciences

Reading between Eye Saccades

Background: Skilled adult readers, in contrast to beginners, show no or little increase in reading latencies as a function of the number of letters in words up to seven letters. The information extraction strategy underlying such efficiency in word identification is still largely unknown, and methods that allow tracking of the letter information extraction through time between eye saccades are needed to fully address this question. Methodology/Principal Findings: The present study examined the use of letter information during reading, by means of the Bubbles technique. Ten participants each read 5,000 five-letter French words sampled in space-time within a 200 ms window. On the temporal dimension, our results show that two moments are especially important during the information extraction process. On the spatial dimension, we found a bias for the upper half of words. We also show for the first time that letter positions four, one, and three are particularly important for the identification of five-letter words. Conclusions/Significance: Our findings are consistent with either a partially parallel reading strategy or an optimal serial reading strategy. We show using computer simulations that this serial reading strategy predicts an absence of a wordlength effect for words from four- to seven letters in length. We believe that the Bubbles technique will play an importan

Deuteron life-time in hot and dense nuclear matter near equilibrium

We consider deuteron formation in hot and dense nuclear matter close to equilibrium and evaluate the life-time of the deuteron fluctuations within the linear response theory. To this end we derive a generalized linear Boltzmann equation where the collision integral is related to equilibrium correlation functions. In this framework we then utilize finite temperature Green functions to evaluate the collision integrals. The elementary reaction cross section is evaluated within the Faddeev approach that is suitably modified to reflect the properties of the surrounding hot and dense matter.Comment: 15 pages, 5 figure

Infinite square-well, trigonometric P\"oschl-Teller and other potential wells with a moving barrier

Using mainly two techniques, a point transformation and a time dependent supersymmetry, we construct in sequence several quantum infinite potential wells with a moving barrier. We depart from the well known system of a one-dimensional particle in a box. With a point transformation, an infinite square-well potential with a moving barrier is generated. Using time dependent supersymmetry, the latter leads to a trigonometric P\"oschl-Teller potential with a moving barrier. Finally, a confluent time dependent supersymmetry transformation is implemented to generate new infinite potential wells, all of them with a moving barrier. For all systems, solutions of the corresponding time dependent Schr\"odinger equation fulfilling boundary conditions are presented in a closed form

Climate change and habitat fragmentation drive the occurrence of Borrelia burgdorferi, the agent of Lyme disease, at the northeastern limit of its distribution

Lyme borreliosis is rapidly emerging in Canada, and climate change is likely a key driver of the northern spread of the disease in North America. We used field and modeling approaches to predict the risk of occurrence of Borrelia burgdorferi, the bacteria causing Lyme disease in North America. We combined climatic and landscape variables to model the current and future (2050) potential distribution of the black-legged tick and the white-footed mouse at the northeastern range limit of Lyme disease and estimated a risk index for B. burgdorferi from these distributions. The risk index was mostly constrained by the distribution of the white-footed mouse, driven by winter climatic conditions. The next factor contributing to the risk index was the distribution of the black-legged tick, estimated from the temperature. Landscape variables such as forest habitat and connectivity contributed little to the risk index. We predict a further northern expansion of B. burgdorferi of approximately 250-500 km by 2050 - a rate of 3.5-11 km per year - and identify areas of rapid rise in the risk of occurrence of B. burgdorferi. Our results will improve understanding of the spread of Lyme disease and inform management strategies at the most northern limit of its distribution.Julie A. Simon, Robby R. Marrotte, Nathalie Desrosiers, Jessica Fiset, Jorge Gaitan, Andrew Gonzalez, Jules K. Koffi, Francois-Joseph Lapointe, Patrick A. Leighton, Lindsay R. Lindsay, Travis Logan, Francois Milord, Nicholas H. Ogden, Anita Rogic, Emilie Roy-Dufresne, Daniel Suter, Nathalie Tessier, and Virginie Millie

Comparing dogs and great apes in their ability to visually track object transpositions

Knowing that objects continue to exist after disappearing from sight and tracking invisible object displacements are two basic elements of spatial cognition. The current study compares dogs and apes in an invisible transposition task. Food was hidden under one of two cups in full view of the subject. After that both cups were displaced, systematically varying two main factors, whether cups were crossed during displacement and whether the cups were substituted by the other cup or instead cups were moved to new locations. While the apes were successful in all conditions, the dogs had a strong preference to approach the location where they last saw the reward, especially if this location remained filled. In addition, dogs seem to have especial difficulties to track the reward when both containers crossed their path during displacement. These results confirm the substantial difference that exists between great apes and dogs with regard to mental representation abilities required to track the invisible displacements of objects

An intercomparison of remote sensing river discharge estimation algorithms from measurements of river height, width, and slope

The Surface Water and Ocean Topography (SWOT) satellite mission planned for launch in 2020 will map river elevations and inundated area globally for rivers >100 m wide. In advance of this launch, we here evaluated the possibility of estimating discharge in ungauged rivers using synthetic, daily ‘‘remote sensing’’ measurements derived from hydraulic models corrupted with minimal observational errors. Five discharge algorithms were evaluated, as well as the median of the five, for 19 rivers spanning a range of hydraulic and geomorphic conditions. Reliance upon a priori information, and thus applicability to truly ungauged reaches, varied among algorithms: one algorithm employed only global limits on velocity and depth, while the other algorithms relied on globally available prior estimates of discharge. We found at least one algorithm able to estimate instantaneous discharge to within 35% relative root-mean-squared error (RRMSE) on 14/16 nonbraided rivers despite out-of-bank flows, multichannel planforms, and backwater effects. Moreover, we found RRMSE was often dominated by bias; the median standard deviation of relative residuals across the 16 nonbraided rivers was only 12.5%. SWOT discharge algorithm progress is therefore encouraging, yet future efforts should consider incorporating ancillary data or multialgorithm synergy to improve results

Arrhythmogenic mechanisms in the isolated perfused hypokalaemic murine heart

AIM: Hypokalaemia is associated with a lethal form of ventricular tachycardia (VT), torsade de pointes, through pathophysiological mechanisms requiring clarification. METHODS: Left ventricular endocardial and epicardial monophasic action potentials were compared in isolated mouse hearts paced from the right ventricular epicardium perfused with hypokalaemic (3 and 4 mm [K(+)](o)) solutions. Corresponding K(+) currents were compared in whole-cell patch-clamped epicardial and endocardial myocytes. RESULTS: Hypokalaemia prolonged epicardial action potential durations (APD) from mean APD(90)s of 37.2 ± 1.7 ms (n = 7) to 58.4 ± 4.1 ms (n =7) and 66.7 ± 2.1 ms (n = 11) at 5.2, 4 and 3 mm [K(+)](o) respectively. Endocardial APD(90)s correspondingly increased from 51.6 ± 1.9 ms (n = 7) to 62.8 ± 2.8 ms (n = 7) and 62.9 ± 5.9 ms (n = 11) giving reductions in endocardial–epicardial differences, ΔAPD(90), from 14.4 ± 2.6 to 4.4 ± 5.0 and −3.4 ± 6.0 ms respectively. Early afterdepolarizations (EADs) occurred in epicardia in three of seven spontaneously beating hearts at 4 mm [K(+)](o) with triggered beats followed by episodes of non-sustained VT in nine of 11 preparations at 3 mm. Programmed electrical stimulation never induced arrhythmic events in preparations perfused with normokalemic solutions yet induced VT in two of seven and nine of 11 preparations at 4 and 3 mm [K(+)](o) respectively. Early outward K(+) current correspondingly fell from 73.46 ± 8.45 to 61.16±6.14 pA/pF in isolated epicardial but not endocardial myocytes (n = 9) (3 mm [K(+)](o)). CONCLUSIONS: Hypokalaemic mouse hearts recapitulate the clinical arrhythmogenic phenotype, demonstrating EADs and triggered beats that might initiate VT on the one hand and reduced transmural dispersion of repolarization reflected in ΔAPD(90) suggesting arrhythmogenic substrate on the other