Silicic volcanism on Mars evidenced by tridymite in high-SiO2 sedimentary rock at Gale crater

Tridymite, a SiO2 mineral that crystallizes at low pressures and high temperatures (>870 °C) from high-SiO2 materials, was detected at high concentrations in a sedimentary mudstone in Gale crater, Mars. Mineralogy and abundance were determined by X-ray diffraction using the Chemistry and Mineralogy instrument on the Mars Science Laboratory rover Curiosity. Terrestrial tridymite is commonly associated with silicic volcanism where high temperatures and high-silica magmas prevail, so this occurrence is the first in situ mineralogical evidence for martian silicic volcanism. Multistep processes, including high-temperature alteration of silica-rich residues of acid sulfate leaching, are alternate formation pathways for martian tridymite but are less likely. The unexpected discovery of tridymite is further evidence of the complexity of igneous petrogenesis on Mars, with igneous evolution to high-SiO2 compositions

Silicic volcanism on Mars evidenced by tridymite in high-SiO_2 sedimentary rock at Gale crater

Tridymite, a low-pressure, high-temperature (>870 °C) SiO_2 polymorph, was detected in a drill sample of laminated mudstone (Buckskin) at Marias Pass in Gale crater, Mars, by the Chemistry and Mineralogy X-ray diffraction instrument onboard the Mars Science Laboratory rover Curiosity. The tridymitic mudstone has ∼40 wt.% crystalline and ∼60 wt.% X-ray amorphous material and a bulk composition with ∼74 wt.% SiO_2 (Alpha Particle X-Ray Spectrometer analysis). Plagioclase (∼17 wt.% of bulk sample), tridymite (∼14 wt.%), sanidine (∼3 wt.%), cation-deficient magnetite (∼3 wt.%), cristobalite (∼2 wt.%), and anhydrite (∼1 wt.%) are the mudstone crystalline minerals. Amorphous material is silica-rich (∼39 wt.% opal-A and/or high-SiO_2 glass and opal-CT), volatile-bearing (16 wt.% mixed cation sulfates, phosphates, and chlorides−perchlorates−chlorates), and has minor TiO_2 and Fe_2O_3T oxides (∼5 wt.%). Rietveld refinement yielded a monoclinic structural model for a well-crystalline tridymite, consistent with high formation temperatures. Terrestrial tridymite is commonly associated with silicic volcanism, and detritus from such volcanism in a “Lake Gale” catchment environment can account for Buckskin’s tridymite, cristobalite, feldspar, and any residual high-SiO_2 glass. These cogenetic detrital phases are possibly sourced from the Gale crater wall/rim/central peak. Opaline silica could form during diagenesis from high-SiO_2 glass, as amorphous precipitated silica, or as a residue of acidic leaching in the sediment source region or at Marias Pass. The amorphous mixed-cation salts and oxides and possibly the crystalline magnetite (otherwise detrital) are primary precipitates and/or their diagenesis products derived from multiple infiltrations of aqueous solutions having variable compositions, temperatures, and acidities. Anhydrite is post lithification fracture/vein fill

The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste

In the past few decades, synthetic fibers are been used widely in the field of sound absorption due to their superior characteristics such as durable and chemical resistant. However, there are several disadvantages of synthetic fibers such as non-biodegradability and hazards to the health of human. In this research, the natural sound absorber from cogon grass was investigated. The objective of the research was to evaluate the performance of cogon grass physical characteristics on its acoustical behavior, to evaluate the effect of sodium hydroxide (NaOH) treatment times on physical and acoustical characteristics of cogon grass, to investigate the decay effects after it was left over for twelve months and lastly to compare and verify the acoustical results with theoretical models based on (Delany-Bazley and Miki Model). The measurement of acoustical characteristics which are sound absorption coefficient (SAC) and noise reduction coefficient (NRC) were done by using impedance tube method (ITM). The samples of cogon grass were tested in a way of the untreated and treated with NaOH in varied soaked hours which are one, two, three, four and five hours. Scanning electron microscope (SEM) and density kit were used to investigate physical characteristics. The research confirmed that physical characteristics of tortuosity and airflow resistivity values tend to increase with the increment of treatment times, but the density and porosity tend to decrease. Untreated samples were tested with varied thicknesses of 10, 20, 30, 40 and 50mm. The results show SAC value increases when the thickness of the sample was increased. Treated samples results show the least treated sample (1 hour) reached the maximum SAC value and indicated the highest value of NRC which is 0.50. The results also show a reduction in sound absorption value after the samples were left for twelve months. Verification parts demonstrated that Delany-Bazley and Miki Model can predict approximately pattern compared with ITM results because of the theoretical models are developed by a simple empirical model approach. Overall, cogon grass samples have the good characteristics to be an acoustic material component

Supplemental Online Material for 'Comparison of the Murchison CM2 and Allende CV3 Chondrites'

Supplemental Online Material for 'Comparison of the Murchison CM2 and Allende CV3 Chondrites

Mineralogy, Provenance, and Diagenesis of a Potassic Basaltic Sandstone on Mars: CheMin X-Ray Diffraction of the Windjana Sample (Kimberley Area, Gale Crater)

The Windjana drill sample, a sandstone of the Dillinger member (Kimberley formation, Gale Crater, Mars), was analyzed by CheMin X-ray diffraction (XRD) in the MSL Curiosity rover. From Rietveld refinements of its XRD pattern, Windjana contains the following: sanidine (21% weight, approximately Or(sub 95)); augite (20%); magnetite (12%); pigeonite; olivine; plagioclase; amorphous and smectitic material (approximately 25%); and percent levels of others including ilmenite, fluorapatite, and bassanite. From mass balance on the Alpha Proton X-ray Spectrometer (APXS) chemical analysis, the amorphous material is Fe rich with nearly no other cations-like ferrihydrite. The Windjana sample shows little alteration and was likely cemented by its magnetite and ferrihydrite. From ChemCam Laser-Induced Breakdown Spectrometer (LIBS) chemical analyses, Windjana is representative of the Dillinger and Mount Remarkable members of the Kimberley formation. LIBS data suggest that the Kimberley sediments include at least three chemical components. The most K-rich targets have 5.6% K2O, approximately 1.8 times that of Windjana, implying a sediment component with greater than 40% sanidine, e.g., a trachyte. A second component is rich in mafic minerals, with little feldspar (like a shergottite). A third component is richer in plagioclase and in Na2O, and is likely to be basaltic. The K-rich sediment component is consistent with APXS and ChemCam observations of K-rich rocks elsewhere in Gale Crater. The source of this sediment component was likely volcanic. The presence of sediment from many igneous sources, in concert with Curiosity's identifications of other igneous materials (e.g.,mugearite), implies that the northern rim of Gale Crater exposes a diverse igneous complex, at least as diverse as that found in similar-age terranes on Earth