Validity and reliability of methods for the detection of secondary caries around amalgam restorations in primary teeth

Secondary caries has been reported as the main reason for restoration replacement. The aim of this in vitro study was to evaluate the performance of different methods - visual inspection, laser fluorescence (DIAGNOdent), radiography and tactile examination - for secondary caries detection in primary molars restored with amalgam. Fifty-four primary molars were photographed and 73 suspect sites adjacent to amalgam restorations were selected. Two examiners evaluated independently these sites using all methods. Agreement between examiners was assessed by the Kappa test. To validate the methods, a caries-detector dye was used after restoration removal. The best cut-off points for the sample were found by a Receiver Operator Characteristic (ROC) analysis, and the area under the ROC curve (Az), and the sensitivity, specificity and accuracy of the methods were calculated for enamel (D2) and dentine (D3) thresholds. These parameters were found for each method and then compared by the McNemar test. The tactile examination and visual inspection presented the highest inter-examiner agreement for the D2 and D3 thresholds, respectively. The visual inspection also showed better performance than the other methods for both thresholds (Az = 0.861 and Az = 0.841, respectively). In conclusion, the visual inspection presented the best performance for detecting enamel and dentin secondary caries in primary teeth restored with amalgam

Evaluation of the dental structure loss produced during maintenance and replacement of occlusal amalgam restorations

The aim of this in vitro study was to evaluate four different approaches to the decision of changing or not defective amalgam restorations in first primary molar teeth concerning the loss of dental structure. Ditched amalgam restorations (n = 11) were submitted to four different treatments, as follows: Control group - polishing and finishing of the restorations were carried out; Amalgam group - the ditched amalgam restorations were replaced by new amalgam restorations; Composite resin group - the initial amalgam restorations were replaced by composite resin restorations; Flowable resin group - the ditching around the amalgam restorations was filled with flowable resin. Images of the sectioned teeth were made and the area of the cavities before and after the procedures was determined by image analysis software to assess structural loss. The data were submitted to ANOVA complemented by the Student Newman Keuls test (p < 0.05). The cavities in all the groups presented significantly greater areas after the procedures. However, the amalgam group showed more substantial dental loss. The other three groups presented no statistically significant difference in dental structure loss after the re-treatments. Thus, replacing ditched amalgam restorations by other similar restorations resulted in a significant dental structure loss while maintaining them or replacing them by resin restorations did not result in significant loss

Differences in responses to the Oral Health Impact Profile (OHIP14) used as a questionnaire or in an interview

The objective of this study was to compare the completion rates and performance of the Brazilian version of the Oral Health Impact Profile (OHIP14) when applied as an interview or in its original self-reported form. A convenience sample of 74 adult patients was selected in a Dental Clinic (University of Araras, Brazil). One examiner administered the instrument in both formats to participants with an interval of 2 weeks between each administration. Data about dental health condition and socioeconomic status were collected and associated with total OHIP14 scores in both formats using linear regression analyses. No differences were found in the total scores and in each subscale of the OHIP14 according to the form of administration. Higher values of completion were found in the interview format. More severe impacts were recorded in the interview format than in the questionnaire format. Higher values of total OHIP-14 scores in both formats were related to the presence of dental caries. Total OHIP14 scores were not influenced by the method of administration. However, the use of the OHIP14 in the questionnaire format may result in lower completion rates and loss of data

Dye-enhanced laser fluorescence detection on natural caries lesions in primary teeth

Objective: This study aimed to investigate the association of two fluorescent dyes and Laser Fluorescence (LF) device in detecting smooth and occlusal natural caries in primary teeth in vitro.Methods: Measurements were performed with the LF and with LF associated with tetrakis (N-methylpyridyl)porphyrin (LF TMPyP) and protoporphyrin IX (LF PPIX) in 72 smooth (63 primary molars) and 134 occlusal sites (81 primary molars). For validation, surfaces were sectioned and sections obtained were evaluated under stereomicroscope. Smooth surfaces were also evaluated using polarized light microscopy and Knoop microhardness. For both smooth and occlusal surfaces, ROC analyses were performed, and sensitivities, specificities and accuracies were assessed. In smooth surfaces, Pearson’s correlation coefficients between LF values and lesions hardness or lesions depth were calculated.Results: LF TMPyP presented higher correlation with hardness and lesion depth than other methods in smooth surfaces. No differences were observed in other parameters among the methods, in both smooth and occlusal surfaces.Relevance: The LF TMPyP might improve performance in quantifying smooth-surface caries lesions in primary teeth. However, the sensitivity is improved at D2 (caries extending into inner half of the enamel but not to amelodentinal junction) threshold when using PPIX in smooth caries lesions. The association of LF with fluorescent dyes does not improve the performance on occlusal caries

Contact with Fluoride-Releasing Restorative Materials Can Arrest Simulated Approximal Caries Lesion

Previous studies have suggested that the presence of white-spot lesion is very probable when adjacent surface is affected by cavitated lesions. This study evaluated the potential of different fluoride-releasing restorative materials in arresting enamel white-spot lesions in approximal surface in contact with them, in vitro (I) and in situ (II). White-spot lesions were formed in 240 primary enamel specimens via pH-cycling. They were put in contact with cylindrical blocks of 6 materials (n=20): composite resin, 2 high-viscous glass ionomer cements (HVGIC), resin-modified GIC, resin-modified nanoionomer, and polyacid-modified resin. In both studies I and II, these settings were designed to simulate the contact point between the restoration and simulated approximal lesion. For study I, they were subjected to a new pH-cycling cariogenic challenge for 7 or 14 days (n=10). For study II, a randomized double-blind in situ design was conducted in two phases (7/14 days) to promote cariogenic challenge. At the end of both studies, specimens were collected for mineral analysis by cross-sectional microhardness. Higher mineral loss was observed for lesions in contact with resin (p<0.001). HVGICs were the most efficient in preventing mineral loss, whereas other materials presented an intermediate behavior. It is concluded that fluoride-releasing materials can moderately reduce white-spot lesions progression, and HVGIC can arrest enamel lesion in approximal surface in contact with them

Impact of pulpectomy versus tooth extraction in children's oral health-related quality of life: A randomized clinical trial

AIM: The aim of this randomized clinical trial was to compare the impact of two management options for primary molars with pulp necrosis (pulpectomy or extraction) on children's oral health-related quality of life (OHRQoL). DESIGN: A total of 100 children aged 3-5 years with at least one necrotic primary molar were selected and randomized into the study groups. The Brazilian version of early childhood oral health impact scale (B-ECOHIS) was completed by the parent proxy reports at baseline and after 4, 8 and 12 months. Differences between the trial groups were assessed through bootstrap linear regression for B-ECOHIS scores, logistic regression for dental pain self-reports and anxiety scores (α = 5%). RESULTS: The mean (SD) B-ECOHIS scores at baseline and after 12 months were 17.7 (6.5) and 3.0 (4.0) in the pulpectomy group and 18.8 (7.7) and 7.9 (7.7) in the extraction group. Both treatments significantly improved OHRQoL, but tooth extraction group showed higher scores in total B-ECOHIS (p < .001) and most domains, indicating lower OHRQoL. Furthermore, higher anxiety levels were reported for dental extraction compared to pulpectomy (OR = 2.52; p = .008). CONCLUSION: Pulpectomy resulted in an improved OHRQoL scores after 12 months when compared to tooth extraction and should be considered as the treatment of choice for necrotic primary molars

A Virtual 3D Dynamic Model of Caries Lesion Progression as a Learning Object for Caries Detection Training and Teaching: Video Development Study

BACKGROUND: In the last decade, 3D virtual models have been used for educational purposes in the health sciences, specifically for teaching human anatomy and pathology. These models provide an opportunity to didactically visualize key spatial relations that can be poorly understood when taught by traditional educational approaches. Caries lesion detection is a crucial process in dentistry that has been reported to be difficult to learn. One especially difficult aspect is linking clinical characteristics of the different severity stages with their histological features, which is fundamental for treatment decision-making. OBJECTIVE: This project was designed to develop a virtual 3D digital model of caries lesion formation and progression to aid the detection of lesions at different severity stages as a potential complement to traditional lectures. METHODS: Pedagogical planning, including identification of objectives, exploration of the degree of difficulty of caries diagnosis-associated topics perceived by dental students and lecturers, review of the literature regarding key concepts, and consultation of experts, was performed prior to constructing the model. An educational script strategy was created based on the topics to be addressed (dental tissues, biofilm stagnation areas, the demineralization process, caries lesion progression on occlusal surfaces, clinical characteristics related to different stages of caries progression, and histological correlations). Virtual 3D models were developed using the Virtual Man Project and refined using multiple 3D software applications. In the next phase, computer graphic modelling and previsualization were executed. After that, the video was revised and edited based on suggestions. Finally, explanatory subtitles were generated, the models were textured and rendered, and voiceovers in 3 languages were implemented. RESULTS: We developed a 6-minute virtual 3D dynamic video in 3 languages (English, Spanish, and Brazilian Portuguese) intended for dentists and dental students to support teaching and learning of caries lesion detection. The videos were made available on YouTube; to date, they have received more than 100,000 views. CONCLUSIONS: Complementary pedagogical tools are valuable to support cariology education. This tool will be further tested in terms of utility and usability as well as user satisfaction in achieving the proposed objectives in specific contexts

Latex allergy in dentistry: clinical cases report

Generally natural rubber latex (NRL) allergy is detected after some exposition to the material. As NRL is com- monly found in different materials used daily in dental clinic, the allergy can be manifested in the pediatric dentistry clinic. The first clinical manifestation can be smooth but also severe, therefore it is important to know different manifestations and how to prevent them. Objective: Report two clinical cases of natural rubber latex allergy in children and to present the safety measures that must be taken during clinical assistance, as using metallic saliva ejector, vinyl gloves for the treatment procedures and as an option to rubber dam. Cases Report: Case 1- Patient presented body swellings after contact with latex. Case 2- Patient presented skin eruptions and urticaria after contact with balloons suggesting possible NRL allergy. Conclusions: The precautions must always be taken during the dental treatment of natural rubber latex allergic patients in order to achieve satisfactory results by avoiding dermatitis or even anaphylactic shock

Choosing the Criteria for Clinical Evaluation of Composite Restorations: An Analysis of Impact on Reliabilty and Treatment Decision

Objective: To assess the reproducibility of two clinical criteria for the evaluation of restorations in primary teeth and the impact on treatment decision. Material and Methods: A cross-sectional study was performed selecting 71 resin-based composite restorations placed in primary molars of children who had sought dental treatment at a dental school. Two trained examiners evaluated independently the restorations using modified FDI and USPHS criteria. All restorations were assessed separately with each system in random order to avoid memory bias. Kappa statistics were used to determine inter-examiner reliability considering each parameter of both criteria and score final about treatment decision. McNemar test was used to compare the treatment decision with two criteria. The significance level was set at 5%. Results: Kappa values ranged from 0.28 to 0.93 with USPHS and 0.28 to 0.88 with FDI, considering each parameter separately. Inter- examiner agreement for treatment decision was excellent for both criteria (Kappa: 0.85-0.90). For clinical decision-making, no difference between criteria was found, irrespective of examiner. Conclusion: Low inter- examiner agreement for evaluation of each parameter of USPHS and FDI criteria does not reflect on reproducibility for treatment decision. Both criteria may be suitable for evaluation of composite restorations in primary teeth