958 research outputs found

    Normal Heat Conduction in a Chain with Weak Interparticle Anharmonic Potential

    Full text link
    We analytically study heat conduction in a chain with interparticle interaction V(x)=lambda[1-cos(x)] and harmonic on-site potential. We start with each site of the system connected to a Langevin heat bath, and investigate the case of small coupling for the interior sites in order to understand the behavior of the system with thermal reservoirs at the boundaries only. We study, in a perturbative analysis, the heat current in the steady state of the one-dimensional system with weak interparticle potential. We obtain an expression for the thermal conductivity, compare the low and high temperature regimes, and show that, as we turn off the couplings with the interior heat baths, there is a "phase transition:'' the Fourier's law holds only at high temperatures

    A checklist of chromosome numbers and karyotypes of Amazonian freshwater fishes

    Get PDF
    Une liste des nombres de chromosomes de 211 espèces de poisson du bassin amazonien est présentée. Ces espèces, appartenant à 5 ordres, sont caractérisées par une grande variabilité du nombre de chromosomes (2n = 22 à 2n = 134), par la présence de chromosomes sexuels et de polymorphisme chromosomique chez certaines espèces, et enfin par une grande spécificité des bandes C et des sites des régions de l'organisateur du nucléole. (Résumé d'auteur

    Portable parallel kernels for high-speed beamforming in synthetic aperture ultrasound imaging

    Get PDF
    In medical ultrasound, synthetic aperture (SA) imaging is well-considered as a novel image formation technique for achieving superior resolution than that offered by existing scanners. However, its intensive processing load is known to be a challenging factor. To address such a computational demand, this paper proposes a new parallel approach based on the design of OpenCL signal processing kernels that can compute SA image formation in real-time. We demonstrate how these kernels can be ported onto different classes of parallel processors, namely multi-core CPUs and GPUs, whose multi-thread computing resources are able to process more than 250 fps. Moreover, they have strong potential to support the development of more complex algorithms, thus increasing the depth range of the inspected human volume and the final image resolution observed by the medical practitioner.published_or_final_versio

    On the Evaluation of Energy-Efficient Deep Learning Using Stacked Autoencoders on Mobile GPUs

    Get PDF
    Over the last years, deep learning architectures have gained attention by winning important international detection and classification challenges. However, due to high levels of energy consumption, the need to use low-power devices at acceptable throughput performance is higher than ever. This paper tries to solve this problem by introducing energy efficient deep learning based on local training and using low-power mobile GPU parallel architectures, all conveniently supported by the same high-level description of the deep network. Also, it proposes to discover the maximum dimensions that a particular type of deep learning architecture—the stacked autoencoder—can support by finding the hardware limitations of a representative group of mobile GPUs and platforms.info:eu-repo/semantics/publishedVersio

    Otimização do processo de obtenção e tratamento de dados de clientes telecontados

    Get PDF
    A conjuntura energética global espelha o enorme desafio de responder à crescente necessidade energética com a utilização crescente de fontes de energia renováveis. Tendo em conta a dependência atual em fontes de energia tradicionais, e considerando a emissão reduzida de poluentes e o baixo custo do gás natural, o papel desta fonte de energia é fundamental na transição para um cenário energético mais limpo. Em Portugal, o sistema de gás natural é recente e a tendência é para um aumento de consumo. Decorrente da liberalização do mercado de gás natural, face à necessidade de disponibilizar informação aos consumidores e atingir uma melhor relação com os consumos, surgiram os sistemas de telecontagem. Estes sistemas de medição são capazes de integrar a recolha, processamento e transmissão de dados, e gerar um vasto conjunto de informação útil a análises. Com a quantidade de informação gerada, o presente trabalho pretende otimizar o processo de obtenção e tratamento de dados de clientes telecontados de uma organização, promovendo a monitorização e a automatização da decisão do processo para efeitos de análise e faturação. Inicialmente, o estudo procurava analisar o processo original e caracterizar o mesmo no que diz respeito às ineficiências das regras de validação implementadas e às falhas globais do processo. De seguida, foi necessário otimizar o fluxo de dados, e desenvolver e implementar uma solução que permitisse realizar um tratamento diário e constante aos dados, com base em condições favoráveis à disponibilização de relatórios auxiliares ao processo de decisão. Primeiramente, de forma a cumprir com o objetivo inicial, foi realizada uma contextualização à telecontagem e de toda a arquitetura do sistema de medição que lhe é inerente, de forma a compreender e analisar o processo original. De seguida, derivado do estudo realizado a processos de tratamento de dados, regras impostas e metodologias presentes na indústria, o diagrama de fluxo foi elaborado e a solução para a ferramenta estabelecida em Microsoft Excel©, com recurso à linguagem Visual Basic for Applications (VBA). Com o desenvolvimento de algoritmos capazes de validar e estimar os dados, foi possível identificar clientes validados e gerar relatórios que fomentaram a faturação com base em consumos reais e antecipação de anomalias. Com o propósito de perceber o sucesso da implementação da ferramenta foi calculado o rácio entre os clientes validados e invalidados. O rácio máximo de 18,42, atingido com o processo atual, comparativamente ao rácio máximo de 3,13, atingido com o processo anterior, permite concluir que o processo de obtenção e tratamento de dados foi otimizado.The global energy situation reflects the enormous challenge of meeting the growing energy need with the increased use of renewable energy sources. Given the current dependence on traditional energy sources, and considering the reduced emission of pollutants and the low cost of natural gas, the role of this energy source is crucial in the transition to a cleaner energy scenario. In Portugal, the natural gas system is recent and the trend is towards an increase in consumption. As a result of the liberalisation of the natural gas market, given the need to provide information to consumers and achieve a better relationship with consumption, telemetering systems have emerged. These measurement systems are capable of integrating the collection, processing and transmission of data, and generate a vast set of information useful for analysis. With the amount of generated information, this work aims to optimise the process of obtaining and processing data from telemetry customers of an organisation, promoting the monitoring and automation of the process decision for the purposes of analysis and invoicing. Initially, the study sought to analyse the original process and characterise it regarding the inefficiencies of the implemented validation rules and the overall process failures. It was then necessary to optimise the data flow, and to develop and implement a solution that would enable the daily and constant processing of the data, based on conditions favourable to the availability of reports auxiliary to the decision-making process. Firstly, in order to meet the initial objective, the telemetering and the entire architecture of the measurement system that is inherent to it were contextualised, in order to understand and analyse the original process. Then, derived from the study carried out on data treatment processes, imposed rules and methodologies present in the industry, the flow diagram was prepared and the solution for the tool was established in Microsoft Excel©, using the Visual Basic for Applications (VBA) language. With the development of algorithms capable of validating and estimating the data, it was possible to identify validated customers and generate reports that promoted invoicing based on real consumption and anticipation of anomalies. In order to understand the success of the implementation of the tool, the ratio between validated and invalidated customers was calculated. The maximum ratio of 18.42, reached with the current process, compared to the maximum ratio of 3.13, reached with the previous process, allows concluding that the process of obtaining and processing data was optimised

    ESTRATÉGIAS DE TROCA PARA SEGUNDO IMUNOBIOLÓGICO NA ARTRITE REUMATOIDE: RESULTADOS DO REGISTRO BRASILEIRO DE AGENTES IMUNOBIOLÓGICOS EM DOENÇAS REUMÁTICAS BIOBADABRASIL

    Get PDF
    OBJETIVOS: Comparar as diferentes estratégias de troca para a segunda Terapia Imunobiológica (TIB) na Artrite Reumatoide (AR), do registro BIOBADABRASIL. MÉTODOS: Coorte de base populacional incluindo 1.109 pacientes com AR que preencheram os critérios classificatórios da American College of Rheumatology / European League Against Rheumatism (ACR/EULAR) 2010 e que iniciaram a primeira TIB. Os pacientes foram acompanhados em até 7 anos, no período de janeiro de 2009 até dezembro de 2015. Foram consideradas as variáveis sexo, idade, duração da doença, Disease Activity Score 28 (DAS 28), além de tratamentos concomitantes, que também foram avaliados. Foram aplicados testes Kaplan-Meier, Qui-Quadrado, Kruskal-Wallis, Wilcoxon-Mann-Whitney e análise de regressão de Cox. As drogas Golimumabe (GOLI) e Certolizumabe (CERTO) foram excluídas da análise de sobrevida em função da pequena amostra. RESULTADOS: Da amostra estudada, 85% dos pacientes eram mulheres com idade média de 50 anos e 11 anos de diagnóstico. O Fator Reumatoide (FR) positivo do grupo foi de 87%, DAS 28 de 5,36 ±1,35, 76% estavam em uso de corticoide e 71% foram avaliados em uso de Metotrexate (MTX). Noventa e um porcento iniciaram agente Anti-fator de Necrose Tumoral (Anti-TNF), nas seguintes proporções: Adalimumabe (ADA) 33% (370), Infliximabe (INF) 32 % (356), Etanercepte (ETA) 23% (258), Rituximabe (RTX) 4% (48), Tocilizumabe (TOCI) 3% (35), Golimumabe(GOLI) 2% (19), Abatacepte (ABA), 1% (14) e Certolizumabe (CERTO) 1% (9). No primeiro tratamento, a sobrevida foi maior para o grupo de não anti-TNF (58,50 ± 3,46 e 95%CI 51,71 65,28) que o grupo de anti-TNF (53,43 ± 1,21 e 95%CI 51,05 55,77), p=0,042. O Tocilimumabe (TOCI) apresentou maior sobrevida (57,22 ± 4,57 e 95%CI 48,27 66,17) quando comparado ao grupo dos antiTNF (53,41±1,21 95%CI 51,05 55,77) e p=0,023. Apenas 32,28% (358) trocaram para um segundo IB (Imunobiológico). Destes, 65,92% (236) mudaram de anti-TNF para anti-TNF (ETA=105, ADA=83, INF=33, outros anti-TNF=15); 27,93% (100) trocaram de anti-TNF para não anti-TNF (RTX=38, TOCI=32, ABA=30) e um menor número de apenas 6,13% (22) mudaram de não anti-TNF para outra classe. Em função da pequena amostra, GOLI e CERTO foram excluídos da segunda análise de sobrevida. A melhor estratégia de troca foi de anti-TNF para não-anti-TNF: 50,72 ± 3 meses (CI 95% 44,84-56,60) vs 44,67±2,46 meses (CI 95% 39,85-49,49) p=0,010. Apesar de usarem menos corticoide e terem maior DAS 28 no início do tratamento, os pacientes que migraram de anti TNF para TOCI apresentaram melhor sobrevida (55,80 ± 4,74 IC 95% 46,51,65,09 meses, p=0,029) comparado ao ETA (50,06 ±3,61 IC 95% 42,99-57,14), RTX (47,75 ± 4,93 IC 95% 38,10-57,40), ABA (44,89±5,94 IC 95% 33,25-56,53), ADA (39,45±3,89 IC 95% 31,83-47,08) e INF (34,43±4,65 IC 95% 25,31-43,55). O principal motivo da troca do primeiro IB foi por ineficácia ou perda de eficácia (64%, n = 216), seguido de efeitos adversos (26%, n=87) e outros motivos (10%, n = 33). Quando o motivo da troca se deu por evento adverso, a melhor alternativa foi observada com a troca para um agente não anti- TNF com 50,29 ± 4,93 meses (95%IC=40,62 59,95) vs 43,23 ± 4,22 meses (95%IC= 34,96 51,51) , p=0,038. CONCLUSÃO: Os agentes anti-TNF são as drogas mais prescritas no registro brasileiro BIOBADABRASIL como primeira e segunda TIB. A opção por um agente não anti TNF como primeira TIB foi a melhor alternativa. A Troca de anti-TNF para não anti-TNF também representou a melhor opção. TOCI mostrou melhor sobrevida como segundo IB. O principal motivo da troca ocorreu por ineficácia ou perda de eficácia. Quando o motivo da troca foi evento adverso , optar por um agente não anti-TNF foi melhor alternativa. Palavras-chave: Artrite reumatoide. Terapia biológica. Sobrevida. Troca. Anti TNF. Não Anti-TNF, Tocilizumabe

    As artes de fazer currículo de educação física com o cotidiano da escola experimental de Vitória/ES: os contextos, os atores e as invenções.

    Get PDF
    As artes de fazer currículo de educação física com o cotidiano da escola experimental de Vitória/ES: os contextos, os atores e as invenções

    Sistema para desinfestar substratos para producao de mudas utilizando-se vapor de agua.

    Get PDF
    bitstream/item/109247/1/Sistema-para-desinfestar-substratos-para-producao-de-mudas-utilizando-se-vapor-de-agua.pd

    EVALUATION OF THE EFFECTS OF ILLUMINATION, TEMPERATURE AND PAINTING FINISH IN PSP TECHNIQUE

    Get PDF
    This paper reports the results of global pressure measurements on a NACA0012 profile, obtained with the Pressure Sensitive Paint technique (PSP), and compares them with conventional pressure tap measurements with the purpose of analyzing the influence of parameters as illumination efficiency and temperature variation of the air flow in the accuracy of the PSP experimental results. The experimental measurements were conducted in the Pilot Transonic Wind Tunnel (TTP) of the Instituto de Aeronáutica e Espaço (IAE) for Mach number values of 0.4, 0.6 and 0.8. The experiments showed that in a carefully prepared experiment, under appropriated operational conditions, and rigorous adjustments of the PSP components, the obtained results can be accurate. Moreover, even when the influence of temperature is significant and the illumination condition is not ideal, it was possible to estimate well the impact caused in the pressure distribution over the model surface

    Desenvolvimento de um sistema para desinfestacao de substratos para producao de mudas, utilizando vapor de agua.

    Get PDF
    bitstream/item/109208/1/Desenvolvimento-de-um-sistema.pd
    corecore