Mechanisms for photon sorting based on slit-groove arrays

Mechanisms for one-dimensional photon sorting are theoretically studied in the framework of a couple mode method. The considered system is a nanopatterned structure composed of two different pixels drilled on the surface of a thin gold layer. Each pixel consists of a slit-groove array designed to squeeze a large fraction of the incident light into the central slit. The Double-Pixel is optimized to resolve two different frequencies in the near infrared. This system shows a high transmission efficiency and a small crosstalk. Its response is found to strongly depend on the effective area shared by overlapping pixels. Three different regimes for the process of photon sorting are identified and the main physical trends underneath in such regimes are unveiled. Optimal efficiencies for the photon sorting are obtained for a moderate number of grooves that overlap with grooves of the neighbor pixel. Results could be applied to optical and infrared detectors.Comment: 12 pages, 4 figure

Transmittance of a subwavelength aperture flanked by a finite groove array \\ placed near the focus of a conventional lens

One-dimensional light harvesting structures illuminated by a conventional lens are studied in this paper. Our theoretical study shows that high transmission efficiencies are obtained when the structure is placed near the focal plane of the lens. The considered structure is a finite slit-groove array (SGA) with a given number of grooves that are symmetrically distributed with respect to a central slit. The SGA is nano-patterned on an opaque metallic film. It is found that a total transmittance of 80% is achieved even for a single slit when (i) Fabry-Perot like modes are excited inside the slit and (ii) the effective cross section of the aperture becomes of the order of the full width at half maximum of the incident beam. A further enhancement of 8% is produced by the groove array. The optimal geometry for the groove array consists of a moderate number of grooves ($\geq 4$) at either side of the slit, separated by a distance of half the incident wavelength $\lambda$. Grooves should be deeper (with depth $\geq \lambda/4$) than those typically reported for plane wave illumination in order to increase their individual scattering cross section.Comment: 7 pages, 6 figure

Optimal light harvesting structures at optical and infrared frequencies

One-dimensional light harvesting structures with a realistic geometry nano-patterned on an opaque metallic film are optimized to render high transmission efficiencies at optical and infrared frequencies. Simple design rules are developed for the particular case of a slit-groove array with a given number of grooves that are symmetrically distributed with respect to a central slit. These rules take advantage of the hybridization of Fabry-Perot modes in the slit and surface modes of the corrugated metal surface. Same design rules apply for optical and infrared frequencies. The parameter space of the groove array is also examined with a conjugate gradient optimization algorithm that used as a seed the geometries optimized following physical intuition. Both uniform and nonuniform groove arrays are considered. The largest transmission enhancement, with respect to a uniform array, is obtained for a chirped groove profile. Such enhancement is a function of the wavelength. It decreases from 39% in the optical part of the spectrum to 15% at the long wavelength infrared.Comment: 13 pages, 5 figure

Mechanisms for photon sorting based on slit-groove arrays

Mechanisms for one-dimensional photon sorting are theoretically studied in the framework of a coupled-mode method. The considered system is a nanopatterned structure composed of two different pixels drilled on the surface of a thin gold layer. Each pixel consists of a slit-groove array designed to squeeze a large fraction of the incident light into the central slit. The Double-Pixel is optimized to resolve two different frequencies in the near infrared. This system shows high transmission efficiencies and a small crosstalk. It is found that the response of the system strongly depends on the effective area shared by overlapping pixels. According to such degree of overlap, photon sorting can be achieved within three different regimes, which are discussed in detail. Optimal photon-sorting efficiencies are obtained for a moderate number of grooves that overlap with grooves of the neighbor pixel. These results could be applied to both optical and infrared detectors.The authors gratefully acknowledge financial support by European Projects EC FP7-ICT PLAISIR Project Ref. 247991, the Spanish Ministry of Science and Innovation project MAT2011-28581-C02-02, and the CUD project Ref. 2013-13.Peer Reviewe

Symmetries in Classical Field Theory

The multisymplectic description of Classical Field Theories is revisited, including its relation with the presymplectic formalism on the space of Cauchy data. Both descriptions allow us to give a complete scheme of classification of infinitesimal symmetries, and to obtain the corresponding conservation laws.Comment: 70S05; 70H33; 55R10; 58A2

Caracterización química y cuantificación del rendimiento de extracción de pigmento en siete accesiones mexicanas de Bixa orellana

Achiote (Bixa orellana) is a plant used for obtaining a natural dye rich on carotenoids (mainly bixin and norbixin); it is also the plant species with the highest content of tocotrienols in nature. In the present work, the pigment extraction yield of seven Mexican accessions of Bixa orellana was quantified. Also color parameters and content of tocotrienols, tocopherols, norbixin, bixin, total phenolic compounds and antioxidant capacity were evaluated in the corresponding annatto extracts. The highest percentage of pigment extraction yield was obtained with KOH (4.84%). Accessions 43 (L*= 4.01 ± 0.79, C*= 7.33 ± 1.07, h= 25.76 ± 6.35) and 50 (L*= 3.17 ± 0.64, C*= 6.81 ± 0.53, h= 26.41 ± 4.41) had the lowest color values, meaning these accessions had a darker and redder color. Four accessions showed the highest content of bixin: accession 48 (3.1%), 45 (2.6%) 43 (2.4%) and 47 (2.2%). Accession 50 had showed the highest content of total phenolic compounds and of tocotrienols (T3), mainly the isoform δ-T3 (5.03 ± 0.64 mg g−1 Seed Dry Weight), as well as the highest antioxidant capacity.El achiote (Bixa orellana) es una planta utilizada para obtener un colorante natural rico en carotenoides (principalmente bixina y norbixina); además, es la especie vegetal con el mayor contenido de tocotrienoles. En este trabajo, se determinó el rendimiento de extracción de pigmento de siete accesiones mexicanas de Bixa orellana. También se evaluaron los parámetros de color y el contenido de tocotrienoles, tocoferoles, norbixina, bixina, compuestos fenólicos totales y la capacidad antioxidante en extractos de annato. El mayor porcentaje de rendimiento de extracción de pigmento fue obtenido con KOH (4.847905%). Las accesiones 43 (L*= 4.01 ± 0.79, C*= 7.33 ± 1.07, h= 25.76 ± 6.35) y 50 (L*= 3.17 ± 0.64, C*= 6.81 ± 0.53, h= 26.41 ± 4.41) presentaron los valores más bajos de los párametros de color, lo que significa que estas accesiones tuvieron un color más oscuro y más rojo. Cuatro accesiones mostraron el mayor contenido de bixina: accesión 48 (3.1%), 45 (2.6%) 43 (2.4%) and 47 (2.2%). La accession 50 mostró el mayor contenido de compuestos fenólicos totales y de tocotrienoles (T3), principalmente la isoforma δ-T3 (5.03 ± 0.64 mg g-1 Peso Seco), así como también la mayor capacidad antioxidante.Fil: Raddatz Mota, D.. Universidad Autónoma Metropolitana; MéxicoFil: Pérez Flores, L. J.. Universidad Autónoma Metropolitana; MéxicoFil: Carrari, Fernando Oscar. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; ArgentinaFil: Insani, Ester Marina. Instituto Nacional de Tecnología Agropecuaria. Centro de Investigación en Ciencias Veterinarias y Agronómicas. Instituto de Biotecnología; ArgentinaFil: Asis, Ramón. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Córdoba. Centro de Investigaciones en Bioquímica Clínica e Inmunología; ArgentinaFil: Mendoza Espinoza, J. A.. Universidad Nacional Autónoma de México; MéxicoFil: Díaz de León Sánchez, F.. Universidad Autónoma Metropolitana; MéxicoFil: Rivera Cabrera, F.. Universidad Autónoma Metropolitana; Méxic

The influence of cell size on the mechanical properties of nanocellular PMMA

Solid-state foaming experiments are conducted on three grades of polymethyl methacrylate (PMMA). Nanocellular PMMA foams are manufactured with an average cell size ranging from 20 nm to 84 nm and a relative density between 0.37 and 0.5. For benchmarking purposes, additional microcellular PMMA foams with an average cell size close to 1 µm and relative density close to that of the nanocellular foams are manufactured. Uniaxial compression tests and single edge notch bend tests are conducted on the PMMA foams. The measured Young’s modulus and yield strength of the PMMA foams are independent of cell size whereas the fracture toughness of the PMMA foam increases with decreasing average cell size from the micron range to the nanometer range.Financial assistance from MINECO, FEDER, UE (MAT2015-69234-R), the Junta of Castile and Leon (VA275P18) and Spanish Ministry of Science, Innovation and Universities (RTI2018-098749-B-I00) are gratefully acknowledged. Financial support from FPU grant FPU14/02050 (V. Bernardo) from the Spanish Ministry of Education and Junta of Castile and Leon grant (J. Martín-de León) are gratefully acknowledged. Financial support from SABIC and the EPSRC award 1611305 (F. Van Loock), and the ERC project MULTILAT (N. A. Fleck) are acknowledged too

A theoretical study of acrylonitrile adsorption on Si(001)

The present work is a comparative study of possible adsorption structures of the conjugated molecule acrylonitrile on Si(001) employing the state of the art pseudopotential method, within a generalized gradient approximation to the density functional theory. In the recent literature it is proposed the interaction of acrylonitrile with Si(001) through a cycloaddition reaction of the cyano group, in competition with the bounding of the two outer atoms of the molecule skeleton with the Si dimer in cross-dimer and cross-trench geometries; between other geometries like which correspond the reaction of the C = C bond with a Si dimer. Starting from a large number of configurations our calculations favor the planar cycloaddition through the terminal N and C atoms on the Si dimer. In this way we explain the electronic and vibrational features obtained experimentally

Acaricide resistance of Rhipicephalus (Boophilus) microplus in State of Mato Grosso do Sul, Brazil.

This study was conducted to obtain an epidemiological view of acaricide resistance in populations of Rhipicephalus (Boophilus) microplus in the State of Mato Grosso do Sul. Twenty-four tick samples were collected from municipalities in the State where farmers had reported concerns about resistance to or failure of tick control. These ticks were subjected to in vitro resistance detection assays using the adult immersion test (AIT). The efficacy of alpha-cypermethrin, cypermethrin and amitraz treatments on samples collected throughout the State was generally poor. AIT showed efficacy ≥ 90% from the use of DDVP + chlorfenvinphos) (20 out of 21 municipalities), dichlorvos + cypermethrin (10 out of 16 municipalities) and cypermethrin + citronella + chlorpyrifos + piperonyl butoxide (20 out of 21 municipalities). PCR assays were used to detect the presence of pyrethroid resistance-associated sodium channel gene mutation. Larvae from three different populations that had previously been diagnosed as pyrethroid-resistant, through AIT, were evaluated. The PCR assays showed that the pyrethroid resistance-associated gene mutation was absent from these three populations. This study confirms that the emergence of resistance is a constant challenge for the livestock industry, and that development of resistance continues to be a major driver for new antiparasitic drugs to be developed