Solid-state foaming experiments are conducted on three grades of polymethyl methacrylate (PMMA). Nanocellular PMMA foams are manufactured with an average cell size ranging from 20 nm to 84 nm and a relative density between 0.37 and 0.5. For benchmarking purposes, additional microcellular PMMA foams with an average cell size close to 1 µm and relative density close to that of the nanocellular foams are manufactured. Uniaxial compression tests and single edge notch bend tests are conducted on the PMMA foams. The measured Young’s modulus and yield strength of the PMMA foams are independent of cell size whereas the fracture toughness of the PMMA foam increases with decreasing average cell size from the micron range to the nanometer range.Financial assistance from MINECO, FEDER, UE (MAT2015-69234-R), the Junta of Castile and Leon (VA275P18) and Spanish Ministry of Science, Innovation and Universities (RTI2018-098749-B-I00) are gratefully acknowledged. Financial support from FPU grant FPU14/02050 (V. Bernardo) from the Spanish Ministry of Education and Junta of Castile and Leon grant (J. Martín-de León) are gratefully acknowledged. Financial support from SABIC and the EPSRC award 1611305 (F. Van Loock), and the ERC project MULTILAT (N. A. Fleck) are acknowledged too
