First result with AMBER+FINITO on the VLTI: The high-precision angular diameter of V3879 Sgr

Our goal is to demonstrate the potential of the interferometric AMBER instrument linked with the Very Large Telescope Interferometer (VLTI) fringe-tracking facility FINITO to derive high-precision stellar diameters. We use commissioning data obtained on the bright single star V3879 Sgr. Locking the interferometric fringes with FINITO allows us to record very low contrast fringes on the AMBER camera. By fitting the amplitude of these fringes, we measure the diameter of the target in three directions simultaneously with an accuracy of 25 micro-arcseconds. We showed that V3879 Sgr has a round photosphere down to a sub-percent level. We quickly reached this level of accuracy because the technique used is independent from absolute calibration (at least for baselines that fully span the visibility null). We briefly discuss the potential biases found at this level of precision. The proposed AMBER+FINITO instrumental setup opens several perspectives for the VLTI in the field of stellar astrophysics, like measuring with high accuracy the oblateness of fast rotating stars or detecting atmospheric starspots

A search for molecules in damped Lyman-alpha absorbers occulting millimetre-loud quasars

We have used the SEST 15-metre and Onsala 20-metre telescopes to perform deep (r.m.s. >~ 30 mJy) integrations of various molecular rotational transitions towards damped Lyman-alpha absorption systems (DLAs) known to occult millimetre-loud quasars. We have observed 6 new systems and improved the existing limits for 11 transitions. These limits may be approaching the sensitivities required to detect new systems and we present a small number of candidate systems which we believe warrant further observation.Comment: 7 pages, 1 PS figure, 4 tables. Accepted by A&

AMBER/VLTI interferometric observations of the recurrent Nova RS Ophiuchii 5.5 days after outburst

International audienceAims.We report on spectrally dispersed interferometric AMBER/VLTI observations of the recurrent nova RS Oph five days after the discovery of its outburst on 2006 Feb. 12. Methods: Using three baselines ranging from 44 to 86 m, and a spectral resolution of λ/δλ=1500, we measured the extension of the milliarcsecond-scale emission in the K band continuum and in the Brγ and He I 2.06 μm lines, allowing us to get an insight into the kinematics of the line forming regions. The continuum visibilities were interpreted by fitting simple geometric models consisting of uniform and Gaussian ellipses, ring and binary models. The visibilities and differential phases in the Brγ line were interpreted using skewed ring models aiming to perform a limited parametric reconstruction of the extension and kinematics of the line forming region. Results: The limited uv coverage does not allow discrimination between filled models (uniform or Gaussian ellipses) and rings. Binary models are discarded because the measured closure phase in the continuum is close to zero. The visibilities in the lines are at a low level compared to their nearby continuum, consistent with a more extended line forming region for He I 2.06 μm than Brγ. The ellipse models for the continuum and for the lines are highly flattened (b/a˜0.6) and share the same position angle (PA˜140°). Their typical Gaussian extensions are 3.1×1.9 mas, 4.9×2.9 mas and 6.3×3.6 mas for the continuum, Brγ and He I 2.06 μm lines, respectively. Two radial velocity fields are apparent in the Brγ line: a slow expanding ring-like structure (v_rad≤1800 km s-1), and a fast structure extended in the E-W direction (v_rad˜ 2500{-}3000 km s-1), a direction that coincides with the jet-like structure seen in the radio. These results confirm the basic fireball model, contrary to the conclusions of other interferometric observations conducted by Monnier et al. (2006a, ApJ, 647, L127). Based on observations collected at the European Southern Observatory, Paranal, Chile, within the programme 276.D-5049

Catching the radio flare in CTA 102 I. Light curve analysis

Context: The blazar CTA 102 (z=1.037) underwent a historical radio outburst in April 2006. This event offered a unique chance to study the physical properties of the jet. Aims: We used multifrequency radio and mm observations to analyze the evolution of the spectral parameters during the flare as a test of the shock-in-jet model under these extreme conditions. Methods: For the analysis of the flare we took into account that the flaring spectrum is superimposed on a quiescent spectrum. We reconstructed the latter from archival data and fitted a synchrotron self-absorbed distribution of emission. The uncertainties of the derived spectral parameters were calculated using Monte Carlo simulations. The spectral evolution is modeled by the shock-in-jet model, and the derived results are discussed in the context of a geometrical model (varying viewing angle) and shock-shock interaction. Results: The evolution of the flare in the turnover frequency-turnover flux density plane shows a double peak structure. The nature of this evolution is dicussed in the frame of shock-in-jet models. We discard the generation of the double peak structure in the turnover frequency-turnover flux density plane purely based on geometrical changes (variation of the Doppler factor). The detailed modeling of the spectral evolution favors a shock-shock interaction as a possible physical mechanism behind the deviations from the standard shock-in-jet model.Comment: 15 pages, 12 figure

A search for periodicity in the light curves of selected blazars

We present an analysis of multifrequency light curves of the sources 2223-052 (3C 446), 2230+114 (CTA 102), and 2251+158 (3C 454.3), which had shown evidence of quasi-periodic activity. The analysis made use of data from the University of Michican Radio Astronomy Observatory (USA) at 4.8, 8, and 14.5 GHz, as well as the Metsahovi Radio Astronomy Observatory (Finland) at 22 and 37 GHz. Application of two different methods (the discrete autocorrelation function and the method of Jurkevich) both revealed evidence for periodicity in the flux variations of these sources at essentially all frequencies. The periods derived for at least two of the sources -- 2223-052 and 2251+158-- are in good agreement with the time interval between the appearance of successive VLBI components. The derived periods for 2251+158 (P = 12.4 yr and 2223-052 (P = 5.8 yr) coincide with the periods found earlier by other authors based on optical light curves.Comment: 27 pages, 11 figures, accepted for publication in Astronomy Report

Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations

In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1±0.9mas and 66±15° respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc

Near-Infrared interferometry of Eta Carinae with high spatial and spectral resolution using the VLTI and the AMBER instrument

We present the first NIR spectro-interferometry of the LBV Eta Carinae. The K band observations were performed with the AMBER instrument of the ESO Very Large Telescope Interferometer using three 8.2m Unit Telescopes with baselines from 42 to 89m. The aim of this work is to study the wavelength dependence of Eta Car's optically thick wind region with a high spatial resolution of 5 mas (11 AU) and high spectral resolution. The medium spectral resolution observations (R=1,500) were performed in the wavelength range around both the HeI 2.059 micron and the Br gamma 2.166 micron emission lines, the high spectral resolution observations (R=12,000) only in the Br gamma line region. In the K-band continuum, a diameter of 4.0 +/-0.2 mas (Gaussian FWHM, fit range 28-89m) was measured for Eta Car's optically thick wind region. If we fit Hillier et al. (2001) model visibilities to the observed AMBER visibilities, we obtain 50 % encircled-energy diameters of 4.2, 6.5 and 9.6mas in the 2.17 micron continuum, the HeI, and the Br gamma emission lines, respectively. In the continuum near the Br gamma line, an elongation along a position angle of 120+/-15 degrees was found, consistent with previous VLTI/VINCI measurements by van Boekel et al. (2003). We compare the measured visibilities with predictions of the radiative transfer model of Hillier et al. (2001), finding good agreement. Furthermore, we discuss the detectability of the hypothetical hot binary companion. For the interpretation of the non-zero differential and closure phases measured within the Br gamma line, we present a simple geometric model of an inclined, latitude-dependent wind zone. Our observations support theoretical models of anisotropic winds from fast-rotating, luminous hot stars with enhanced high-velocity mass loss near the polar regions.Comment: 22 pages, 14 figures, 2 tables; A&A in pres

Interferometric data reduction with AMBER/VLTI. Principle, estimators, and illustration

This is the author accepted manuscript. The final version is available from EDP Sciences via the DOI in this record.Aims. In this paper, we present an innovative data reduction method for single-mode interferometry. It has been specifically developed for the AMBER instrument, the three-beam combiner of the Very Large Telescope Interferometer, but it can be derived for any single-mode interferometer. Methods. The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the instrument in order to obtain the calibration matrix that builds the linear relationship between the interferogram and the interferometric observable, which is the complex visibility. Once the calibration procedure has been performed, the signal processing appears to be a classical least-square determination of a linear inverse problem. From the estimated complex visibility, we derive the squared visibility, the closure phase, and the spectral differential phase. Results. The data reduction procedures have been gathered into the so-called amdlib software, now available for the community, and are presented in this paper. Furthermore, each step in this original algorithm is illustrated and discussed from various on-sky observations conducted with the VLTI, with a focus on the control of the data quality and the effective execution of the data reduction procedures. We point out the present limited performances of the instrument due to VLTI instrumental vibrations which are difficult to calibrate.The AMBER project4 was founded by the French Centre National de la Recherche Scientifique (CNRS), the Max Planck Institute für Radioastronomie (MPIfR) in Bonn, the Osservatorio Astrofisico di Arcetri (OAA) in Firenze, the French Region “Provence Alpes Côte D’Azur” and the European Southern Observatory (ESO). The CNRS funding has been made through the Institut National des Sciences de l’Univers (INSU) and its Programmes Nationaux (ASHRA, PNPS, PNP). The OAA co-authors acknowledge partial support from MIUR grants to the Arcetri Observatory: A LBT interferometric arm, and analysis of VLTI interferometric data and From Stars to Planets: accretion, disk evolution and planet formation and from INAF grants to the Arcetri Observatory Stellar and Extragalactic Astrophysics with Optical Interferometry. C. Gil work was supported in part by the Fundação para a Ciência e a Tecnologia through project POCTI/CTE-AST/55691/2004 from POCTI, with funds from the European program FEDER