134 research outputs found
Large amplitude tip/tilt estimation by geometric diversity for multiple-aperture telescopes
A novel method nicknamed ELASTIC is proposed for the alignment of
multiple-aperture telescopes, in particular segmented telescopes. It only needs
the acquisition of two diversity images of an unresolved source, and is based
on the computation of a modified, frequency-shifted, cross-spectrum. It
provides a polychromatic large range tip/tilt estimation with the existing
hardware and an inexpensive noniterative unsupervised algorithm. Its
performance is studied and optimized by means of simulations. They show that
with 5000 photo-electrons/sub-aperture/frame and 1024x1024 pixel images,
residues are within the capture range of interferometric phasing algorithms
such as phase diversity. The closed-loop alignment of a 6 sub-aperture mirror
provides an experimental demonstration of the effectiveness of the method.
Author accepted version. Final version is Copyright 2017 Optical Society of
America. One print or electronic copy may be made for personal use only.
Systematic reproduction and distribution, duplication of any material in this
paper for a fee or for commercial purposes, or modifications of the content of
this paper are prohibited.Comment: Final version:
https://www.osapublishing.org/josaa/abstract.cfm?uri=josaa-34-8-127
Cophasage des pupilles d'un télescope multi-pupilles
- La mise en phase, ou cophasage, des pupilles d'un télescope Multi-pupilles nécessite la connaissance des aberrations différentielles de piston entre les pupilles. Un premier estimateur simple de piston peut être obtenu par analyse directe de la Fonction de Transfert Optique. Nous présentons ici la dérivation d'un second estimateur par une approche Moindres Carrés, et nous comparons les performances des deux estimateurs
Off-Axis Nulling Transfer Function Measurement: A First Assessment
We want to study a polychromatic inverse problem method with nulling interferometers to obtain information on the structures of the exozodiacal light. For this reason, during the first semester of 2013, thanks to the support of the consortium PERSEE, we launched a campaign of laboratory measurements with the nulling interferometric test bench PERSEE, operating with 9 spectral channels between J and K bands. Our objective is to characterise the transfer function, i.e. the map of the null as a function of wavelength for an off-axis source, the null being optimised on the central source or on the source photocenter. We were able to reach on-axis null depths better than 10(exp 4). This work is part of a broader project aiming at creating a simulator of a nulling interferometer in which typical noises of a real instrument are introduced. We present here our first results
GRAVITY: getting to the event horizon of Sgr A*
We present the second-generation VLTI instrument GRAVITY, which currently is
in the preliminary design phase. GRAVITY is specifically designed to observe
highly relativistic motions of matter close to the event horizon of Sgr A*, the
massive black hole at center of the Milky Way. We have identified the key
design features needed to achieve this goal and present the resulting
instrument concept. It includes an integrated optics, 4-telescope, dual feed
beam combiner operated in a cryogenic vessel; near infrared wavefront sensing
adaptive optics; fringe tracking on secondary sources within the field of view
of the VLTI and a novel metrology concept. Simulations show that the planned
design matches the scientific needs; in particular that 10 microarcsecond
astrometry is feasible for a source with a magnitude of K=15 like Sgr A*, given
the availability of suitable phase reference sources.Comment: 13 pages, 11 figures, to appear in the conference proceedings of SPIE
Astronomical Instrumentation, 23-28 June 2008, Marseille, Franc
Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations
In this work, we present the first AMBER observations, of the Wolf-Rayet and
O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the
telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered
spectrally dispersed visibilities, as well as differential and closure phases,
with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret
these data in the context of a binary system with unresolved components,
neglecting in a first approximation the wind-wind collision zone flux
contribution. We show that the AMBER observables result primarily from the
contribution of the individual components of the WR+O binary system. We discuss
several interpretations of the residuals, and speculate on the detection of an
additional continuum component, originating from the free-free emission
associated with the wind-wind collision zone (WWCZ), and contributing at most
to the observed K-band flux at the 5% level. The expected absolute separation
and position angle at the time of observations were 5.1±0.9mas and
66±15° respectively. However, we infer a separation of
3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus
implies that the binary system lies at a distance of 368+38-13 pc, in agreement
with recent spectrophotometric estimates, but significantly larger than the
Hipparcos value of 258+41-31 pc
Near-Infrared interferometry of Eta Carinae with high spatial and spectral resolution using the VLTI and the AMBER instrument
We present the first NIR spectro-interferometry of the LBV Eta Carinae. The K
band observations were performed with the AMBER instrument of the ESO Very
Large Telescope Interferometer using three 8.2m Unit Telescopes with baselines
from 42 to 89m. The aim of this work is to study the wavelength dependence of
Eta Car's optically thick wind region with a high spatial resolution of 5 mas
(11 AU) and high spectral resolution. The medium spectral resolution
observations (R=1,500) were performed in the wavelength range around both the
HeI 2.059 micron and the Br gamma 2.166 micron emission lines, the high
spectral resolution observations (R=12,000) only in the Br gamma line region.
In the K-band continuum, a diameter of 4.0 +/-0.2 mas (Gaussian FWHM, fit range
28-89m) was measured for Eta Car's optically thick wind region. If we fit
Hillier et al. (2001) model visibilities to the observed AMBER visibilities, we
obtain 50 % encircled-energy diameters of 4.2, 6.5 and 9.6mas in the 2.17
micron continuum, the HeI, and the Br gamma emission lines, respectively. In
the continuum near the Br gamma line, an elongation along a position angle of
120+/-15 degrees was found, consistent with previous VLTI/VINCI measurements by
van Boekel et al. (2003). We compare the measured visibilities with predictions
of the radiative transfer model of Hillier et al. (2001), finding good
agreement. Furthermore, we discuss the detectability of the hypothetical hot
binary companion. For the interpretation of the non-zero differential and
closure phases measured within the Br gamma line, we present a simple geometric
model of an inclined, latitude-dependent wind zone. Our observations support
theoretical models of anisotropic winds from fast-rotating, luminous hot stars
with enhanced high-velocity mass loss near the polar regions.Comment: 22 pages, 14 figures, 2 tables; A&A in pres
Focal plane wavefront sensing on SUBARU/SCExAO
Focal plane wavefront sensing is an elegant solution for wavefront sensing since near-focal images of any source taken by a detector show distortions in the presence of aberrations. Non-Common Path Aberrations and the Low Wind Effect both have the ability to limit the achievable contrast of the finest coronagraphs coupled with the best extreme adaptive optics systems. To correct for these aberrations, the Subaru Coronagraphic Extreme Adaptive Optics instrument hosts many focal plane wavefront sensors using detectors as close to the science detector as possible. We present seven of them and compare their implementation and efficiency on SCExAO. This work will be critical for wavefront sensing on next generation of extremely large telescopes that might present similar limitations
PEGASE: a free flying interferometer for the spectroscopy of giant exo-planets
This paper presents a summary of the phase-0 performed in 2005 for the Pegase mission. The main scientific goal is the spectroscopy of hot Jupiters (Pegasides) and brown dwarfs from 2.5 to 5 μm. The mission can extend to the exploration of the inner part of protoplanetary disks, the study of dust clouds around AGN,. The instrument is basically a two-aperture (D=40 cm) interferometer composed of two siderostats and one beam-combiner. The formation is linear and orbits around L2, pointing in the anti-solar direction within a +/-30° cone. The baseline is adjustable from 50 to 500 m in both nulling and visibility measurement modes. The angular resolution ranges from 1 to 20 mas and the spectral resolution is 60. in the nulling mode, a 2.5 nm rms stability of the optical path difference (OPD) and a pointing stability of 30 mas rms impose a two level control architecture. It combines control loops implemented at satellite level and control loops operating inside the payload using fine mechanisms. According to our preliminary study, this mission is feasible within an 8 to 9 years development plan using existing or slightly improved space components, but its cost requires international cooperation. Pegase could be a valuable Darwin/TPF-I pathfinder, with a less demanding, but still ambitious, technological challenge and a highly associated scientific return. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only
Progress of the CHARA/SPICA project
This is the final version. Available from SPIE via the DOI in this recordSPIE Astronomical Telescopes + Instrumentation conference, 14 - 18 December 2020, Online OnlyCHARA/SPICA (Stellar Parameters and Images with a Cophased Array) is currently being developed at Observatoire de la Cote d'Azur. It will be installed at the visible focus of the CHARA Array by the end of 2021. It has been designed to perform a large survey of fundamental stellar parameters with, in the possible cases, a detailed imaging of the surface or environment of stars. To reach the required precision and sensitivity, CHARA/SPICA combines a low spectral resolution mode R = 140 in the visible and single-mode fibers fed by the AO stages of CHARA. This setup generates additional needs before the interferometric combination: the compensation of atmospheric refraction and longitudinal dispersion, and the fringe stabilization. In this paper, we present the main features of the 6-telescopes fibered visible beam combiner (SPICA-VIS) together with the first laboratory and on-sky results of the fringe tracker (SPICA-FT). We describe also the new fringe-tracker simulator developed in parallel to SPICA-FT.National Science Foundation (NSF)GSU College of Arts and SciencesGSU Office of the Vice President for Research and Economic DevelopmentEuropean Union Horizon 2020Onera’s Direction Scientifique General
Constraining the wind launching region in Herbig Ae stars: AMBER/VLTI spectroscopy of HD 104237
Astronomy and Astrophysics, 464, pp. 55-58, http://dx.doi.org./10.1051/0004-6361:20065719International audienc
- …