6,872 research outputs found
Data acquisition software for the CMS strip tracker
The CMS silicon strip tracker, providing a sensitive area of approximately 200 m2 and comprising 10 million readout channels, has recently been completed at the tracker integration facility at CERN. The strip tracker community is currently working to develop and integrate the online and offline software frameworks, known as XDAQ and CMSSW respectively, for the purposes of data acquisition and detector commissioning and monitoring. Recent developments have seen the integration of many new services and tools within the online data acquisition system, such as event building, online distributed analysis, an online monitoring framework, and data storage management. We review the various software components that comprise the strip tracker data acquisition system, the software architectures used for stand-alone and global data-taking modes. Our experiences in commissioning and operating one of the largest ever silicon micro-strip tracking systems are also reviewed
Evaluating research impact: The development of a research for impact tool
© 2016 Tsey, Lawson, Kinchin, Bainbridge, McCalman, Watkin, Cadet-James and Rossetto. Introduction: This paper examines the process of developing a Research for Impact Tool in the contexts of general fiscal constraint, increased competition for funding, perennial concerns about the over-researching of Aboriginal and Torres Strait Islander issues without demonstrable benefits as well as conceptual and methodological difficulties of evaluating research impact. The aim is to highlight the challenges and opportunities involved in evaluating research impact to serve as resource for potential users of the research for impact tool and others interested in assessing the impact of research. Materials and methods: A combination of literature reviews, workshops with researchers, and reflections by project team members and partners using participatory snowball techniques. Results: Assessing research impact is perceived to be difficult, akin to the so-called "wicked problem," but not impossible. Heuristic and collaborative approach to research that takes the expectations of research users, research participants and the funders of research offers a pragmatic solution to evaluating research impact. The logic of the proposed Research for Impact Tool is based on the understanding that the value of research is to create evidence and/or products to support smarter decisions so as to improve the human condition. Research is, therefore, of limited value unless the evidence created is used to make smarter decisions for the betterment of society. A practical way of approaching research impact is, therefore, to start with the decisions confronting decision makers whether they are government policymakers, industry, professional practitioners, or households and the extent to which the research supports them to make smarter policy and practice decisions and the knock-on consequences of doing so. Embedded at each step in the impact planning and tracking process is the need for appropriate mix of expertise, capacity enhancement, and collaborative participatory learning-by-doing approaches. Discussion: The tool was developed in the context of Aboriginal and Torres Strait Islander research but the basic idea that the way to assess research impact is to start upfront with the information needs of decisions makers is equally applicable to research in other settings, both applied (horizontal) and basic (vertical) research. The tool will be further tested and evaluated with researchers over the next 2 years (2016/17). The decision by the Australian Government to include 'industry engagement' and 'impact' as additions to the Excellence in Research for Australia (ERA) quality measures from 2018 makes the Research for Impact Tool a timely development. The wider challenge is to engage with major Australian research funding agencies to ensure consistent alignment and approaches across research users, communities, and funders in evaluating impact
Commissioning and Calibrating the CMS Silicon Strip Tracker
The data acquisition system for the CMS Silicon Strip Tracker (SST) is based around a custom analogue front-end ASIC, an analogue optical link system and an off-detector VME board that performs digitization, zero-suppression and data formatting. A complex procedure is required to optimally configure, calibrate and synchronize the 107 channels of the SST readout system. We present an overview of this procedure, which will be used to commission and calibrate the SST during the integration, Start-Up and operational phases of the experiment. Recent experiences from the CMS Magnet Test Cosmic Challenge and system tests at the Tracker Integration Facility are also reported
Monitoring the CMS strip tracker readout system
The CMS Silicon Strip Tracker at the LHC comprises a sensitive area of approximately 200 m2 and 10 million readout channels. Its data acquisition system is based around a custom analogue front-end chip. Both the control and the readout of the front-end electronics are performed by off-detector VME boards in the counting room, which digitise the raw event data and perform zero-suppression and formatting. The data acquisition system uses the CMS online software framework to configure, control and monitor the hardware components and steer the data acquisition. The first data analysis is performed online within the official CMS reconstruction framework, which provides many services, such as distributed analysis, access to geometry and conditions data, and a Data Quality Monitoring tool based on the online physics reconstruction. The data acquisition monitoring of the Strip Tracker uses both the data acquisition and the reconstruction software frameworks in order to provide real-time feedback to shifters on the operational state of the detector, archiving for later analysis and possibly trigger automatic recovery actions in case of errors. Here we review the proposed architecture of the monitoring system and we describe its software components, which are already in place, the various monitoring streams available, and our experiences of operating and monitoring a large-scale system
Education then and now: making the case for ecol-agogy
The processes, settings and outcomes of human education have distinctive impact on the human and non-human world: this paper sets out to discuss what may have motivated the initiation of human education, how it has been maintained why the outcome has wide-ranging, and often negative, planetary impact.
The analysis offers a multi-disciplinary account of education, from pre-history to the present, noting that humans, past and present are born into an âopen worldâ that requires world building or, niche construction. As a result, cultural and genetic evolution are out of synchronisation instigating an existential threat and the anxious experience of âadaptive-lagâ leading to the motive for continued niche construction. Education is presented as a particular type of niche construction requiring teachers and the use of symbolic verbal language to help learners move from simplistic âsplitâ thinking to the more mature position where the needs of self and others can be met
Visualizing stromal cell dynamics in different tumor microenvironments by spinning disk confocal microscopy
The tumor microenvironment consists of stromal cells and extracellular factors that evolve in parallel with carcinoma cells. To gain insights into the activities of stromal cell populations, we developed and applied multicolor imaging techniques to analyze the behavior of these cells within different tumor microenvironments in the same live mouse. We found that regulatory T-lymphocytes (Tregs) migrated in proximity to blood vessels. Dendriticlike cells, myeloid cells and carcinoma-associated fibroblasts all exhibited higher motility in the microenvironment at the tumor periphery than within the tumor mass. Since oxygen levels differ between tumor microenvironments, we tested if acute hypoxia could account for the differences in cell migration. Direct visualization revealed that Tregs ceased migration under acute systemic hypoxia, whereas myeloid cells continued migrating. In the same mouse and microenvironment, we experimentally subdivided the myeloid cell population and revealed that uptake of fluorescent dextran defined a low-motility subpopulation expressing markers of tumor-promoting, alternatively activated macrophages. In contrast, fluorescent anti-Gr1 antibodies marked myeloid cells patrolling inside tumor vessels and in the stroma. Our techniques allow real-time combinatorial analysis of cell populations based on spatial location, gene expression, behavior and cell surface molecules within intact tumors. The techniques are not limited to investigations in cancer, but could give new insights into cell behavior more broadly in development and disease
Searching for New Physics Through AMO Precision Measurements
We briefly review recent experiments in atomic, molecular, and optical
physics using precision measurements to search for physics beyond the Standard
Model. We consider three main categories of experiments: searches for changes
in fundamental constants, measurements of the anomalous magnetic moment of the
electron, and searches for an electric dipole moment of the electron.Comment: Prepared for Comments on AMO Physics at Physica Script
No one's discussing the elephant in the room: Contemplating questions of research impact and benefit in Aboriginal and Torres Strait Islander Australian health research
© 2015 Bainbridge et al. Background: There remains a concern that Indigenous Australians have been over-researched without corresponding improvements in their health; this trend is applicable to most Indigenous populations globally. This debate article has a dual purpose: 1) to open a frank conversation about the value of research to Indigenous Australian populations; and 2) to stimulate ways of thinking about potential resolutions to the lack of progress made in the Indigenous research benefit debate. Discussion: Capturing the meaning of research benefit takes the form of ethical value-oriented methodological considerations in the decision-making processes of Indigenous research endeavours. Because research practices come from Western knowledge bases, attaining such positions in research means reconciling both Indigenous and Western knowledge systems to produce new methodologies that guide planning, evaluating and monitoring of research practices as necessary. Increasingly, more sophisticated performance measures have been implemented to ensure academic impact and benefits are captured. Assessing societal and other non-academic impacts and benefits however, has not been accorded corresponding attention. Research reform has only focussed on research translation in more recent years. The research impact debate must take account of the various standards of accountability (to whom), impact priorities (for whom), positive and negative impacts, and biases that operate in describing impact and measuring benefit. Summary: A perennial question in Indigenous research discourse is whether the abundance of research conducted; purportedly to improve health, is justified and benefits Indigenous people in ways that are meaningful and valued by them. Different research stakeholders have different conceptions of the value and nature of research, its conduct, what it should achieve and the kinds of benefits expected. We need to work collaboratively and listen more closely to the voice of Indigenous Australians to better understand, demonstrate and measure health research benefits. The authors conclude that as an imperative, a systematic benefit assessment strategy that includes identification of research priorities and planning, monitoring and evaluation components needs to be developed and implemented across research projects. In Indigenous health research, this will often mean adopting a benefit-led approach by changing the way research is done and preferencing alternative research methodologies. As a point of departure to improving impact and reaching mutually beneficial outcomes for researchers and partners in Indigenous health research, we need to routinise the assessment of benefit from outset of research as one of the standards toward which we work
Square-tiled cyclic covers
A cyclic cover of the complex projective line branched at four appropriate
points has a natural structure of a square-tiled surface. We describe the
combinatorics of such a square-tiled surface, the geometry of the corresponding
Teichm\"uller curve, and compute the Lyapunov exponents of the determinant
bundle over the Teichm\"uller curve with respect to the geodesic flow. This
paper includes a new example (announced by G. Forni and C. Matheus in
\cite{Forni:Matheus}) of a Teichm\"uller curve of a square-tiled cyclic cover
in a stratum of Abelian differentials in genus four with a maximally degenerate
Kontsevich--Zorich spectrum (the only known example found previously by Forni
in genus three also corresponds to a square-tiled cyclic cover
\cite{ForniSurvey}).
We present several new examples of Teichm\"uller curves in strata of
holomorphic and meromorphic quadratic differentials with maximally degenerate
Kontsevich--Zorich spectrum. Presumably, these examples cover all possible
Teichm\"uller curves with maximally degenerate spectrum. We prove that this is
indeed the case within the class of square-tiled cyclic covers.Comment: 34 pages, 6 figures. Final version incorporating referees comments.
In particular, a gap in the previous version was corrected. This file uses
the journal's class file (jmd.cls), so that it is very similar to published
versio
Electron focusing, mode spectroscopy and mass enhancement in small GaAs/AlGaAs rings
A new electron focusing effect has been discovered in small single and
coupled GaAs/AlGaAs rings. The focusing in the single ring is attributed solely
to internal orbits. The focusing effect allows the ring to be used as a small
mass spectrometer. The focusing causes peaks in the magnetoresistance at low
fields, and the peak positions were used to study the dispersion relation of
the one-dimensional magnetoelectric subbands. The electron effective mass
increases with the applied magnetic field by a factor of , at a magnetic
field of . This is the first time this increase has been measured
directly. General agreement obtains between the experiment and the subband
calculations for straight channels.Comment: 13 pages figures are available by reques
- âŠ