Productivity of Osprey, Pandion haliaetus, Nesting on Natural and Artificial Structures in the Kawartha Lakes, Ontario, 1991-2001

Ospreys (Pandion haliaetus) declined throughout the Great Lakes basin during the 1950s to 1970s due to usage of organochlorine pesticides. Following the banning of DDT in 1972, artificial elevated nest structures were erected in the Kawartha Lakes region of south-central Ontario to aid in their recovery. As the population grew, large stumps of flooded trees, < 1 m above the surface of the water became important nesting sites, despite their propensity to flood in turbulent weather conditions. We compared the productivity of Ospreys among nest substrates and longevity of the nests in this area from 1991 to 2001. Of 260 individual nesting attempts made over the 11 years, 57% used man-made structures, primarily either quadrupod nesting platforms or utility poles. Of nests on natural substrates, stump nests accounted for 37% of total nesting attempts; elevated tree nests were relatively uncommon (6%). Productivity of stump nests was significantly greater than that of artificial or tree nests (1.48 versus 1.16 and 0.73 chicks produced per occupied nest, respectively). Nevertheless, survivorship of stump nests was less than that of platform nests after 3 years of age, as high water levels, storms or winter ice activity destroyed some of these low nests between breeding seasons. Ospreys were able to attain greater productivity in these stump nests than on man-made nesting substrates

Pipeline network features and leak detection by cross-correlation analysis of reflected waves

This paper describes progress on a new technique to detect pipeline features and leaks using signal processing of a pressure wave measurement. Previous work (by the present authors) has shown that the analysis of pressure wave reflections in fluid pipe networks can be used to identify specific pipeline features such as open ends, closed ends, valves, junctions, and certain types of bends. It was demonstrated that by using an extension of cross-correlation analysis, the identification of features can be achieved using fewer sensors than are traditionally employed. The key to the effectiveness of the technique lies in the artificial generation of pressure waves using a solenoid valve, rather than relying upon natural sources of fluid excitation. This paper uses an enhanced signal processing technique to improve the detection of leaks. It is shown experimentally that features and leaks can be detected around a sharp bend and up to seven reflections from features/ leaks can be detected, by which time the wave has traveled over 95 m. The testing determined the position of a leak to within an accuracy of 5%, even when the location of the reflection from a leak is itself dispersed over a certain distance and, therefore, does not cause an exact reflection of the wave

Applying the method of normal forms to second-order nonlinear vibration problems

Vibration problems are naturally formulated with second-order equations of motion. When the vibration problem is nonlinear in nature, using normal form analysis currently requires that the second-order equations of motion be put into first-order form. In this paper, we demonstrate that normal form analysis can be carried out on the second-order equations of motion. In addition, for forced, damped, nonlinear vibration problems, we show that the invariance properties of the first- and second-order transforms differ. As a result, using the second-order approach leads to a simplified formulation for forced, damped, nonlinear vibration problems

Proceedings of the Third International Workshop on Jointed Structures.

The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics

Failure Analysis of Flow-induced Vibration Problem of in-serviced Duplex Stainless Steel Piping System in Oil and Gas Industry

Failure of the duplex stainless steel piping system in oil and gas industry can have disastrous effects. In this study, a novel method of failure analysis of flow-induced vibration problem of in-serviced duplex stainless steel piping system is proposed. The proposed non-destructive technique is able to determine a suitable operating condition for continuous operation without failure. The technique relies on the combined operation of operational modal analysis, operating deflection shape analysis and linear elastic finite element analysis. The effect of different operating conditions for two distinct valve opening cases (i.e. fully opened and partially opened) on the dynamic stress is examined, and they are utilised for forecasting purpose in failure analysis. The result shows that maximum operating conditions are 360 and 400 mmscfd for fully opened and partially opened flow control valves, respectively. Beyond this limit, the piping system most likely will fail

The design and function of birds’ nests

All birds construct nests in which to lay eggs and/or raise offspring. Traditionally, it was thought that natural selection and the requirement to minimize the risk of predation determined the design of completed nests. However, it is becoming increasingly apparent that sexual selection also influences nest design. This is an important development as while species such as bowerbirds build structures that are extended phenotypic signals whose sole purpose is to attract a mate, nests contain eggs and/or offspring, thereby suggesting a direct tradeoff between the conflicting requirements of natural and sexual selection. Nest design also varies adaptively in order to both minimize the detrimental effects of parasites and to create a suitable microclimate for parents and developing offspring in relation to predictable variation in environmental conditions. Our understanding of the design and function of birds’ nests has increased considerably in recent years, and the evidence suggests that nests have four nonmutually exclusive functions. Consequently, we conclude that the design of birds’ nests is far more sophisticated than previously realized and that nests are multifunctional structures that have important fitness consequences for the builder/s

Threat-sensitive anti-predator defence in precocial wader, the northern lapwing Vanellus vanellus

Birds exhibit various forms of anti-predator behaviours to avoid reproductive failure, with mobbing—observation, approach and usually harassment of a predator—being one of the most commonly observed. Here, we investigate patterns of temporal variation in the mobbing response exhibited by a precocial species, the northern lapwing (Vanellus vanellus). We test whether brood age and self-reliance, or the perceived risk posed by various predators, affect mobbing response of lapwings. We quantified aggressive interactions between lapwings and their natural avian predators and used generalized additive models to test how timing and predator species identity are related to the mobbing response of lapwings. Lapwings diversified mobbing response within the breeding season and depending on predator species. Raven Corvus corax, hooded crow Corvus cornix and harriers evoked the strongest response, while common buzzard Buteo buteo, white stork Ciconia ciconia, black-headed gull Chroicocephalus ridibundus and rook Corvus frugilegus were less frequently attacked. Lapwings increased their mobbing response against raven, common buzzard, white stork and rook throughout the breeding season, while defence against hooded crow, harriers and black-headed gull did not exhibit clear temporal patterns. Mobbing behaviour of lapwings apparently constitutes a flexible anti-predator strategy. The anti-predator response depends on predator species, which may suggest that lapwings distinguish between predator types and match mobbing response to the perceived hazard at different stages of the breeding cycle. We conclude that a single species may exhibit various patterns of temporal variation in anti-predator defence, which may correspond with various hypotheses derived from parental investment theory

Elevated Uptake of Plasma Macromolecules by Regions of Arterial Wall Predisposed to Plaque Instability in a Mouse Model

Atherosclerosis may be triggered by an elevated net transport of lipid-carrying macromolecules from plasma into the arterial wall. We hypothesised that whether lesions are of the thin-cap fibroatheroma (TCFA) type or are less fatty and more fibrous depends on the degree of elevation of transport, with greater uptake leading to the former. We further hypothesised that the degree of elevation can depend on haemodynamic wall shear stress characteristics and nitric oxide synthesis. Placing a tapered cuff around the carotid artery of apolipoprotein E -/- mice modifies patterns of shear stress and eNOS expression, and triggers lesion development at the upstream and downstream cuff margins; upstream but not downstream lesions resemble the TCFA. We measured wall uptake of a macromolecular tracer in the carotid artery of C57bl/6 mice after cuff placement. Uptake was elevated in the regions that develop lesions in hyperlipidaemic mice and was significantly more elevated where plaques of the TCFA type develop. Computational simulations and effects of reversing the cuff orientation indicated a role for solid as well as fluid mechanical stresses. Inhibiting NO synthesis abolished the difference in uptake between the upstream and downstream sites. The data support the hypothesis that excessively elevated wall uptake of plasma macromolecules initiates the development of the TCFA, suggest that such uptake can result from solid and fluid mechanical stresses, and are consistent with a role for NO synthesis. Modification of wall transport properties might form the basis of novel methods for reducing plaque rupture