Combining branched copolymers with additives generates stable thermoresponsive emulsions with in situ gelation upon exposure to body temperature

© 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Branched copolymer surfactants (BCS) containing thermoresponsive polymer components, hydrophilic components, and hydrophobic termini allow the formation of emulsions which switch from liquid at room temperature to a gel state upon heating. These materials have great potential as in situ gel-forming dosage forms for administration to external and internal body sites, where the emulsion system also allows effective solubilisation of a range of drugs with different chemistries. These systems have been reported previously, however there are many challenges to translation into pharmaceutical excipients. To transition towards this application, this manuscript describes the evaluation of a range of pharmaceutically-relevant oils in the BCS system as well as evaluation of surfactants and polymeric/oligomeric additives to enhance stability. Key endpoints for this study are macroscopic stability of the emulsions and rheological response to temperature. The effect of an optimal additive (methylcellulose) on the nanoscale processes occurring in the BCS-stabilised emulsions is probed by small-angle neutron scattering (SANS) to better comprehend the system. Overall, the study reports an optimal BCS/methylcellulose system exhibiting sol–gel transition at a physiologically-relevant temperature without macroscopic evidence of instability as an in situ gelling dosage form.Peer reviewe

Branched Copolymer Surfactants as Versatile Templates for Responsive Emulsifiers with Bespoke Temperature-Triggered Emulsion-Breaking or Gelation

It has been found that the thermoresponsive behavior of emulsions stabilized by block copolymer surfactants (BCSs) can induce either gelation or emulsion break-up with mild temperature changes. A hydrophilic, steric-stabilizing component of the BCS, polyethylene glycol methacrylate (PEGMA), is crucial to control the thermoresponsive behavior of the emulsions: longer PEG chains (950 g mol−1) lead to thermoregulation, whereas shorter PEGM chains (500 or 300 g mol−1) lead to emulsion break-up upon mild heating. Additionally, the relative abundance of PEGMA to the thermoresponsive component in the BCS controls the gelation temperature of BCS-stabilized emulsions. Small-angle neutron scattering and transmission electron microscopy reveal that the BCS forms oblate ellipsoids which grow anisotropically with temperature. In samples that form a gel, there is evidence that these nano-objects form supra-colloidal structures, which are responsible for the gel mesophase formation. An optimal BCS can form emulsions that transition from a liquid to gel state when warmed above 32 °C. This makes the system ideal for in situ gelation upon contact with the body. Overall, this study highlights the great potential of BCSs in generating thermoresponsive emulsions for drug delivery and other healthcare applications

Branched Copolymer Surfactants as Versatile Templates for Responsive Emulsifiers with Bespoke Temperature‐Triggered Emulsion‐Breaking or Gelation

© 2023 The Authors. Advanced Materials Interfaces published by Wiley-VCH GmbH. This is an open access article distributed under the terms of the Creative Commons Attribution License (CC BY), https://creativecommons.org/licenses/by/4.0/It has been found that the thermoresponsive behavior of emulsions stabilized by block copolymer surfactants (BCSs) can induce either gelation or emulsion break‐up with mild temperature changes. A hydrophilic, steric‐stabilizing component of the BCS, polyethylene glycol methacrylate (PEGMA), is crucial to control the thermoresponsive behavior of the emulsions: longer PEG chains (950 g mol−1) lead to thermoregulation, whereas shorter PEGM chains (500 or 300 g mol−1) lead to emulsion break‐up upon mild heating. Additionally, the relative abundance of PEGMA to the thermoresponsive component in the BCS controls the gelation temperature of BCS‐stabilized emulsions. Small‐angle neutron scattering and transmission electron microscopy reveal that the BCS forms oblate ellipsoids which grow anisotropically with temperature. In samples that form a gel, there is evidence that these nano‐objects form supra‐colloidal structures, which are responsible for the gel mesophase formation. An optimal BCS can form emulsions that transition from a liquid to gel state when warmed above 32 °C. This makes the system ideal for in situ gelation upon contact with the body. Overall, this study highlights the great potential of BCSs in generating thermoresponsive emulsions for drug delivery and other healthcare applications.Peer reviewe

Intercultural and digital competence in teacher training from an international perspective: Poland Portugal, Slovakia, Spain and Russia

This article presents one of the studies from the European project IRNET, a network that pursues the development of new tools and methods for advanced pedagogical science in the field of ICT instruments, elearning and intercultural competences. We intend to explore the application of international and national policies of innovative, digital Education and intercultural competences in teacher training, as well as innovative educational practices. Another objective of the project is also to identify such practises and/or research projects in order to foster intercultural and digital competences in Spain, Poland , Slovak, Portugal and Russia. From a comparative perspective and on a qualitative paradigm, we have analyzed three comparative units that have allowed, among other things, us to look at the impact of projects financed with European or national funds as promoters of change and innovation related to intercultural training and technologies information. Finally, it has been observed that teaching trends point to a professorship endowed with skills that integrate intercultural models from the joint search for the school of the future, and for that online networks and virtual learning communities are key resources

Report on the implementation of WorkPackage 2 "Analyses of legal, ethical, human, technical and social factors of ICT and e-learning development and intercultural competences state in every partner country" in the framework of the IRNet project

This article, prepared by an international team of researchers from different scientific areas, connected with ICT, e-learning, pedagogy, and other related disciplines, focuses on the objectives and some results of the international project IRNet. In particular, the article describes research tools, methods, and a procedure of the WP2, that is, analyses of legal, ethical, human, technical, and social factors of ICT and e-learning development, and the state of intercultural competences in partner countries: objectives, tasks, deliverables, and implementation of research trips. Researchers from Poland, the Netherlands, Spain, Slovakia, Portugal, Czech Republic, Australia, Ukraine, and Russia analyzed the results of WP2 in the context of the next stages and Work packages of IRNet project – International Research Network

Report on the implementation of WP3 "Analyses and evaluation of the ICT level, e-learning and intercultural development in every participating country" in the framework of the IRNet project

This article, prepared by an international team of authors – researchers from different scientific areas, connected with ICT, e-learning, pedagogy, and other related disciplines – focuses on the objectives and some results of the IRNet international project. In particular, this article describes the research tools, methods and some procedures of the WP3 “Analyses and Evaluation of the ICT Level, E-learning and Intercultural Development in Every Participating Country”: Objectives, Tasks, Deliverables, and implementation of research trips. Except that, the article presents more important events, such as (video)conferences, seminars, workshops, an e-round table debate; among these events are ICTE2014, DLCC2014, “New Educational Strategies in Modern Information Space,” “Hightech information educational environment,” during which some more important results of the project research were presented. The list of publications includes 32 papers and a manuscript with WP3 results. Researchers from Poland, Russia, Ukraine, the Netherlands, Spain, Slovakia, Portugal, Czech Republic and Australia analysed the results of WP3 in the context of the next stages and Work packages of IRNet project – International Research Network

Cashew gum (Anacardium occidentale) as a potential source for the production of tocopherol-loaded nanoparticles: formulation, release profile and cytotoxicity

Every year, more than thirty thousand tons of Cashew gum (Anacardium occidentale, family: Anacardiaceae) are produced in Brazil; however, only a small amount is used for different applications in foodstuff and in pharmaceutical industries. As a raw material for the production of drug delivery systems, cashew gum is still regarded as an innovative compound worth to be exploited. In this work, cashew gum was extracted from the crude exudate of cashew tree employing four methodologies resulting in a light brown powder in different yields (40.61% to 58.40%). The total ashes (0.34% to 1.05%) and moisture (12.90% to 14.81%) were also dependent on the purification approach. FTIR spectra showed the typical bands of purified cashew gum samples, confirming their suitability for the development of a pharmaceutical product. Cashew gum nanoparticles were produced by nanoprecipitation resulting in particles of low polydispersity (<0.2) and an average size depending on the percentage of the oil. The zeta potential of nanoparticles was found to be below 20 mV, which promotes electrostatic stability. Encapsulation efficiencies were above 99.9%, while loading capacity increased with the increase of the percentage of the oil content of particles. The release of the oil from the nanoparticles followed the KorsmeyerPeppas kinetics model, while particles did not show any signs of toxicity when tested in three distinct cell lines (LLC-MK2, HepG2, and THP-1). Our study highlights the potential added value of using a protein-, lignans-, and nucleic acids-enriched resin obtained from crude extract as a new raw material for the production of drug delivery systems.This research received funding from the Coordenação Aperfeiçoamento de Pessoal de Nivel Superior (CAPES), Fundação de Ámparo à Pesquisa do Estado de Sergipe (FAPITEC) (PROCESSO: 88887.159533/2017-00 extração, encapsulação e caracterização de bioativos para o interesse biotecnologico) and Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq 301964/2019-0 Chamada 06/2019, and Chamada CNPq nº 01/2019), from Portuguese Foundation for Science and Technology (FCT/MEC) through national funds, and co-financed by FEDER, under the Partnership Agreement PT2020 for the project UIDB/04469/2020.info:eu-repo/semantics/publishedVersio

Atrasentan and renal events in patients with type 2 diabetes and chronic kidney disease (SONAR): a double-blind, randomised, placebo-controlled trial

Background: Short-term treatment for people with type 2 diabetes using a low dose of the selective endothelin A receptor antagonist atrasentan reduces albuminuria without causing significant sodium retention. We report the long-term effects of treatment with atrasentan on major renal outcomes. Methods: We did this double-blind, randomised, placebo-controlled trial at 689 sites in 41 countries. We enrolled adults aged 18–85 years with type 2 diabetes, estimated glomerular filtration rate (eGFR)25–75 mL/min per 1·73 m 2 of body surface area, and a urine albumin-to-creatinine ratio (UACR)of 300–5000 mg/g who had received maximum labelled or tolerated renin–angiotensin system inhibition for at least 4 weeks. Participants were given atrasentan 0·75 mg orally daily during an enrichment period before random group assignment. Those with a UACR decrease of at least 30% with no substantial fluid retention during the enrichment period (responders)were included in the double-blind treatment period. Responders were randomly assigned to receive either atrasentan 0·75 mg orally daily or placebo. All patients and investigators were masked to treatment assignment. The primary endpoint was a composite of doubling of serum creatinine (sustained for ≥30 days)or end-stage kidney disease (eGFR <15 mL/min per 1·73 m 2 sustained for ≥90 days, chronic dialysis for ≥90 days, kidney transplantation, or death from kidney failure)in the intention-to-treat population of all responders. Safety was assessed in all patients who received at least one dose of their assigned study treatment. The study is registered with ClinicalTrials.gov, number NCT01858532. Findings: Between May 17, 2013, and July 13, 2017, 11 087 patients were screened; 5117 entered the enrichment period, and 4711 completed the enrichment period. Of these, 2648 patients were responders and were randomly assigned to the atrasentan group (n=1325)or placebo group (n=1323). Median follow-up was 2·2 years (IQR 1·4–2·9). 79 (6·0%)of 1325 patients in the atrasentan group and 105 (7·9%)of 1323 in the placebo group had a primary composite renal endpoint event (hazard ratio [HR]0·65 [95% CI 0·49–0·88]; p=0·0047). Fluid retention and anaemia adverse events, which have been previously attributed to endothelin receptor antagonists, were more frequent in the atrasentan group than in the placebo group. Hospital admission for heart failure occurred in 47 (3·5%)of 1325 patients in the atrasentan group and 34 (2·6%)of 1323 patients in the placebo group (HR 1·33 [95% CI 0·85–2·07]; p=0·208). 58 (4·4%)patients in the atrasentan group and 52 (3·9%)in the placebo group died (HR 1·09 [95% CI 0·75–1·59]; p=0·65). Interpretation: Atrasentan reduced the risk of renal events in patients with diabetes and chronic kidney disease who were selected to optimise efficacy and safety. These data support a potential role for selective endothelin receptor antagonists in protecting renal function in patients with type 2 diabetes at high risk of developing end-stage kidney disease. Funding: AbbVie

Hyperbranched polyesters for polyurethane coatings: their preparation, structure and crosslinking with polyisocyanates

In this work, hyperbranched aromatic polyesters-polyphenols based on 4,4-bis(4’ hydroxy¬phenyl)pentanoic acid (BHPPA) were prepared and, according to the authors knowledge, for the first time tested as precursors for polyurethane bulk resins and coatings. Comparison of poly-BHPPA with competing products The materials prepared in this work show better properties than their aliphatic polyester-polyol analoga based on 2,2-bis-(hydroxymethyl)propanoic acid (BHMPA). Especially, the solubility of poly-BHPPA in organic solvents is better and poly-BHPPAs also do not tend to microphase separation during their reaction with isocyanates, in contrast to poly-BHMPAs. The poly-BHPPA and the polyurethane networks made from them display higher Tg values than analogous poly- BHMPA compounds. Because of the high Tg of the reacting and final systems, curing must occur at elevated temperatures (90°C) in order to avoid undercure. The lower reactivity of phenolic OH groups prevents the reaction from being too fast at that temperature. A drawback of the polyurethanes based on the aromatic polyesters-polyols prepared is the lower thermal stability of their urethane bonds, if compared to aliphatic urethanes. An interesting possibility for future investigations would be the modification of the BHPPA monomer in order to change the OH functionality from phenolic to aliphatic OH, e.g. by replacement of the phenolic OH by hydroxymethyl or hydroxyethyl groups (requires a strong modification of the monomer synthesis) or simpler by reacting the phenolic OH of BHPPA with a suitable reagent like oxirane, which would lead to groups like O-CH2-CH2-OH in the place of the phenolic OH. Such a BHPPA modification should in turn yield modified “poly-BHPPA” polycondensates, which would combine the advantages of poly-BHPPA with those of aliphatic OH precursors of polyurethanes. Poly-BHPPA synthesis Hyperbranched polymers of the 4,4-bis-(4’-hydroxyphenyl)pentanoic acid (BHPPA) were synthesized successfully by the catalyzed (by dibutyltin diacetate) polycondensation of BHPPA. The products obtained were oligomers with number average molecular weight ranging from 1800 to 3400 g/mol (polymerization degree of ca. 6 to 12), displaying a first moment of functionality in the range 7 to 14. Such products were good OH precursors for the preparation of polyurethane coatings, because higher functional polymers would gel at low conversions. The analysis of the functional groups (determination of acid and hydroxyl numbers) and the 1H-NMR and the 13C-NMR spectroscopy were found to be good methods for the determination of molecular weights. The polydispersity of the poly-BHPPA products was in the range 3.5 to 6. Their degree of branching was found to be in the range 0.36 to 0.47. Poly-BHPPA containing aliphatic polyols as core monomers were also prepared successfully. Difunctional and trifunctional core monomers usually reached a full conversion of their OH groups, while the tetra- and hexafunctional core monomers were converted only to 89%. In all these products however, a considerable amount, usually even a majority, of the polymer molecules were core free. The poly-BHPPA products prepared displayed relatively high glass transition temperatures, in the range of 84°C to 114°C, obviously due to interactions between the phenol groups and to hydrogen bridging. The thermal stability of these products was also high, with decomposition occurring near 350°C (at a heating rate of 10°C / min) Kinetics investigations of the poly-BHPPA reactivity towards isocyanates The poly-BHPPA are polyphenols and were expectedly found to react significantly slower with isocyanates than aliphatic alcohols. The reactivity of poly BHPPA was also found to be somewhat lower than that of the monofunctional, low molar-mass 4 ethylphenol. Hexamethylene diisocyanate trimer, Desmodur N3300, was found to be more reactive than hexamethylene diisocyanate (HDI) or butyl isocyanate in all experiments, possibly due to a substitution effect. The substitution effect can be explained by a change of microenvironment caused by conversion of isocyanate group and OH group into urethane groups. The reactions of low-molecular-mass alcohols or phenols with low molecular weight isocyanates followed well the 2nd order kinetics, while the reactions of poly-BHPPA with isocyanates show deviations from ideal 2nd order kinetics at higher conversions. All the kinetics experiments were carried out under catalysis by dibutyltin dilaurate. This catalyst inhibits the undesired reaction of isocyanate groups with moisture. It was also found that the catalysis was necessary to reach reasonable curing times for poly-BHPPA based polyurethane networks. The uncatalyzed systems reacted extremely slowly. Preparation of polyurethane networks from poly-BHPPA The poly BHPPA products prepared were used successfully as OH functional precursors of polyurethane networks. The networks prepared contained only very low sol fractions. Acetone and also ethylene diglycol dimethylether (diglyme) were found to be good swelling solvents for the networks prepared, while methyl propyl ketone was a much poorer solvent and aromatic compounds like toluene or xylene practically did not swell the poly BHPPA based polyurethanes. The networks prepared contain a relatively high amount of cyclic bonds, 40 to 50% in the finally cured state, which is an expected result for systems with precursors of high functionality and with small distances between the functional groups. The temperature of glass transition (Tg) of the networks prepared (ranging from 68°C to 126°C) depends of the poly BHPPA precursor used: it increases with increasing molecular mass and with increasing core functionality. The choice of the isocyanate crosslinker also influences Tg: the networks made from HDI show higher Tg values, than networks made from the same poly BHPPA but crosslinked with Desmodur N3300 (Tri HDI). The urethane bonds in the networks prepared start to decompose near 140°C. The easier degradation of PU with aromatic urethane bonds is a disadvantage in comparison with aliphatic polyurethanes, whose decomposition starts at 200°C. The surfaces of polyurethane coatings prepared are smooth, displaying a roughness of ca. 20-25 nm, and relatively hydrophilic: the contact angle with water was found to be near 80°. The prepared networks are also relatively hard, possessing the Shore D hardness of 70

High Resolution Powder Electron Diffraction in Scanning Electron Microscopy

A modern scanning electron microscope equipped with a pixelated detector of transmitted electrons can record a four-dimensional (4D) dataset containing a two-dimensional (2D) array of 2D nanobeam electron diffraction patterns; this is known as a four-dimensional scanning transmission electron microscopy (4D-STEM). In this work, we introduce a new version of our method called 4D-STEM/PNBD (powder nanobeam diffraction), which yields high-resolution powder diffractograms, whose quality is fully comparable to standard TEM/SAED (selected-area electron diffraction) patterns. Our method converts a complex 4D-STEM dataset measured on a nanocrystalline material to a single 2D powder electron diffractogram, which is easy to process with standard software. The original version of 4D-STEM/PNBD method, which suffered from low resolution, was improved in three important areas: (i) an optimized data collection protocol enables the experimental determination of the point spread function (PSF) of the primary electron beam, (ii) an improved data processing combines an entropy-based filtering of the whole dataset with a PSF-deconvolution of the individual 2D diffractograms and (iii) completely re-written software automates all calculations and requires just a minimal user input. The new method was applied to Au, TbF3 and TiO2 nanocrystals and the resolution of the 4D-STEM/PNBD diffractograms was even slightly better than that of TEM/SAED