Surface Roughness Dominated Pinning Mechanism of Magnetic Vortices in Soft Ferromagnetic Films

Although pinning of domain walls in ferromagnets is ubiquitous, the absence of an appropriate characterization tool has limited the ability to correlate the physical and magnetic microstructures of ferromagnetic films with specific pinning mechanisms. Here, we show that the pinning of a magnetic vortex, the simplest possible domain structure in soft ferromagnets, is strongly correlated with surface roughness, and we make a quantitative comparison of the pinning energy and spatial range in films of various thickness. The results demonstrate that thickness fluctuations on the lateral length scale of the vortex core diameter, i.e. an effective roughness at a specific length scale, provides the dominant pinning mechanism. We argue that this mechanism will be important in virtually any soft ferromagnetic film.Comment: 4 figure

Parallel developmental genetic features underlie stickleback gill raker evolution.

BackgroundConvergent evolution, the repeated evolution of similar phenotypes in independent lineages, provides natural replicates to study mechanisms of evolution. Cases of convergent evolution might have the same underlying developmental and genetic bases, implying that some evolutionary trajectories might be predictable. In a classic example of convergent evolution, most freshwater populations of threespine stickleback fish have independently evolved a reduction of gill raker number to adapt to novel diets. Gill rakers are a segmentally reiterated set of dermal bones important for fish feeding. A previous large quantitative trait locus (QTL) mapping study using a marine × freshwater F2 cross identified QTL on chromosomes 4 and 20 with large effects on evolved gill raker reduction.ResultsBy examining skeletal morphology in adult and developing sticklebacks, we find heritable marine/freshwater differences in gill raker number and spacing that are specified early in development. Using the expression of the Ectodysplasin receptor (Edar) gene as a marker of raker primordia, we find that the differences are present before the budding of gill rakers occurs, suggesting an early change to a lateral inhibition process controlling raker primordia spacing. Through linkage mapping in F2 fish from crosses with three independently derived freshwater populations, we find in all three crosses QTL overlapping both previously identified QTL on chromosomes 4 and 20 that control raker number. These two QTL affect the early spacing of gill raker buds.ConclusionsCollectively, these data demonstrate that parallel developmental genetic features underlie the convergent evolution of gill raker reduction in freshwater sticklebacks, suggesting that even highly polygenic adaptive traits can have a predictable developmental genetic basis

A late-time transition in the cosmic dark energy?

We study constraints from the latest CMB, large scale structure (2dF, Abell/ACO, PSCz) and SN1a data on dark energy models with a sharp transition in their equation of state, w(z). Such a transition is motivated by models like vacuum metamorphosis where non-perturbative quantum effects are important at late times. We allow the transition to occur at a specific redshift, z_t, to a final negative pressure -1 < w_f < -1/3. We find that the CMB and supernovae data, in particular, prefer a late-time transition due to the associated delay in cosmic acceleration. The best fits (with 1 sigma errors) to all the data are z_t = 2.0^{+2.2}_{-0.76}, \Omega_Q = 0.73^{+0.02}_{-0.04} and w_f = -1^{+0.2}.Comment: 6 Pages, 5 colour figures, MNRAS styl

LEVELS OF BIRD DAMAGE TO SORGHUM IN THE AWASH BASIN OFETHIOPIA AND THE EFFECTS OF THE CONTROL OF QUELEA NESTING COLONIES

Quantitative assessments of bird damage to lowland sorghum (Sorghum bicolor) were made annually from 1976 through 1979 in the major growing areas associated with the Awash River Basin. Results indicated that the Red-billed Quelea (Quelea quelea) can be an important limiting factor in the overall production of this cereal, and that damage can be locally severe. Lethal control of Quelea breeding colonies found along the Awash River and at Lake Zwai was undertaken in September/ October of both 1978 and 1979. Subsequent assessments showed substantially less bird damage in both years and overall losses were minimal

IoT Asset Tracker

This senior project will be the completion of an IoT asset Tracker. In today’s day and age, technology is weaving its way into every aspect of life. Because of this, we demand to know more and more information about everything that is going on in our lives. One of these needed pieces of information is knowing the location of our most valuable assets. This is the main goal of this project: to build a portable SMS driven GNSS tracking device. The device is designed to provide two methods of tracking for any mobile asset. The device will utilize a large touchscreen for easy user manipulation and a Cat-M1 cellular module for wireless communication over SMS. The first method of tracking uses a repeated location ping that uses only a user defined phone number and interval to begin operation. The second method of tracking utilizes a geofence to detect whether the device has left a predetermined radius based off of the initial location of initialization. Using either of these methods the device will provide the user an easy and reliable solution to any of their tracking needs

Water facilities in retrospect and prospect: An illuminating tool for vehicle design

Water facilities play a fundamental role in the design of air, ground, and marine vehicles by providing a qualitative, and sometimes quantitative, description of complex flow phenomena. Water tunnels, channels, and tow tanks used as flow-diagnostic tools have experienced a renaissance in recent years in response to the increased complexity of designs suitable for advanced technology vehicles. These vehicles are frequently characterized by large regions of steady and unsteady three-dimensional flow separation and ensuing vortical flows. The visualization and interpretation of the complicated fluid motions about isolated vehicle components and complete configurations in a time and cost effective manner in hydrodynamic test facilities is a key element in the development of flow control concepts, and, hence, improved vehicle designs. A historical perspective of the role of water facilities in the vehicle design process is presented. The application of water facilities to specific aerodynamic and hydrodynamic flow problems is discussed, and the strengths and limitations of these important experimental tools are emphasized

Novel steady state of a microtubule assembly in a confined geometry

We study the steady state of an assembly of microtubules in a confined volume, analogous to the situation inside a cell where the cell boundary forms a natural barrier to growth. We show that the dynamical equations for growing and shrinking microtubules predict the existence of two steady states, with either exponentially decaying or exponentially increasing distribution of microtubule lengths. We identify the regimes in parameter space corresponding to these steady states. In the latter case, the apparent catastrophe frequency near the boundary was found to be significantly larger than that in the interior. Both the exponential distribution of lengths and the increase in the catastrophe frequency near the cell margin is in excellent agreement with recent experimental observations.Comment: 8 pages, submitted to Phys. Rev.

Constraining the Temperature of Impact Melt from the Mistastin Lake Impact Structure Using Zircon Crystal Structures

Impact melt is a product of hyper-velocity impact events formed by the instantaneous melting of near-surface target rocks. Constraining the temperature of impact melt is vital to understanding its prograde heating and cooling history, which can have implications for inferring the environment of early Earth ~4.0 billion years ago when microbial life potentially arose. To date, only one datum on the initial impact melt temperature has been derived by Timms et al. These authors studied zirconia microstructures and crystallographic orientations that revealed the former presence of cubic zirconia, found in a black impact glass at the Mistastin Lake impact structure, Canada. The presence of cubic zirconia indicates a minimum temperature for the impact melt of >2370C from the dissociation temperature of zircon to cubic zirconia and liquid SiO2. With only one temperature datum, it is still difficult to constrain the entire temperature range experienced during the impact melting process; from its instantaneous formation to thermal equilibrium with the cold clasts collected along the crater floor and walls. In addition, obtaining a temperature value from only one type of impactite limits the inferred temperature range, because each impactite experiences a different cooling history. In this study, we present a preliminary investigation of 61 zircon crystals, 14 of which are similar to those studied by Timms et al., from the Mistastin Lake impact structure. To acquire a more accurate temperature profile representative of impact melt, zircon crystals were collected from different types of impactites containing impact melt, including additional samples of the black impact glass studied by Timms et al

A Finite Difference Method for Off-fault Plasticity throughout the Earthquake Cycle

We have developed an efficient computational framework for simulating multiple earthquake cycles with off-fault plasticity. The method is developed for the classical antiplane problem of a vertical strike-slip fault governed by rate-and-state friction, with inertial effects captured through the radiationdamping approximation. Both rate-independent plasticity and viscoplasticity are considered, where stresses are constrained by a Drucker-Prager yield condition. The off-fault volume is discretized using finite differences and tectonic loading is imposed by displacing the remote side boundaries at a constant rate. Time-stepping combines an adaptive Runge-Kutta method with an incremental solution process which makes use of an elastoplastic tangent stiffness tensor and the return-mapping algorithm. Solutions are verified by convergence tests and comparison to a finite element solution. We quantify how viscosity, isotropic hardening, and cohesion affect the magnitude and off-fault extent of plastic strain that develops over many ruptures. If hardening is included, plastic strain saturates after the first event and the response during subsequent ruptures is effectively elastic. For viscoplasticity without hardening, however, successive ruptures continue to generate additional plastic strain. In all cases, coseismic slip in the shallow sub-surface is diminished compared to slip accumulated at depth during interseismic loading. The evolution of this slip deficit with each subsequent event, however, is dictated by the plasticity model. Integration of the off-fault plastic strain from the viscoplastic model reveals that a significant amount of tectonic off-set is accommodated by inelastic deformation (~0.1 m per rupture, or ~10% of the tectonic deformation budget)

Envisioning futures of practice-centered computing

© Copyright 2019 held by Authors. In this panel, we will engage with the conference's membership and friends to consider directions for the possible futures of practice-centered computing. This panel is not targeting or aiming to result in a single, agreed "universal” vision, nor to ask for a shared vision among the panelists and the audience. Rather, we offer several and diverse vision statements by distinguished and innovative ECSCW scholars, being experts in their specific domain or context of research. These statements will be necessarily incomplete until the ECSCW membership has joined the discussion, offering their own, additional visions of the futures of the field. With this, the panel aims to engage in a discussion that foresees exciting future research directions for the field of ECSCW but likewise also unveils potential hurdles the community might face