Osteoselection supported by phase separeted polymer blend films

Cataloged from PDF version of article.The instability of implants after placement inside the body is one of the main obstacles to clinically succeed in periodontal and orthopedic applications. Adherence of fibroblasts instead of osteoblasts to implant surfaces usually results in formation of scar tissue and loss of the implant. Thus, selective bioadhesivity of osteoblasts is a desired characteristic for implant materials. In this study, we developed osteoselective and biofriendly polymeric thin films fabricated with a simple phase separation method using either homopolymers or various blends of homopolymers and copolymers. As adhesive and proliferative features of cells are highly dependent on the physicochemical properties of the surfaces, substrates with distinct chemical heterogeneity, wettability, and surface topography were developed and assessed for their osteoselective characteristics. Surface characterizations of the fabricated polymer thin films were performed with optical microscopy and SEM, their wettabilities were determined by contact angle measurements, and their surface roughness was measured by profilometry. Long-term adhesion behaviors of cells to polymer thin films were determined by F-actin staining of Saos-2 osteoblasts, and human gingival fibroblasts, HGFs, and their morphologies were observed by SEM imaging. The biocompatibility of the surfaces was also examined through cell viability assay. Our results showed that heterogeneous polypropylene polyethylene/polystyrene surfaces can govern Saos-2 and HGF attachment and organization. Selective adhesion of Saos-2 osteoblasts and inhibited adhesion of HGF cells were achieved on micro-structured and hydrophobic surfaces. This work paves the way for better control of cellular behaviors for adjustment of cell material interactions. © 2014 Wiley Periodicals, Inc

Combined XPS and contact angle studies of ethylene vinyl acetate and polyvinyl acetate blends

Cataloged from PDF version of article.In this study, we prepared thin films by blending ethylene vinyl acetate copolymers (EVA) containing 12-33 (wt.%) vinyl acetate (VA) with polyvinyl acetate (PVAc) and high density polyethylene homopolymers. Large area micropatterns having controlled protrusion sizes were obtained by phase-separation especially for the PVAc/EVA-33 blends using dip coating. These surfaces were characterized by XPS and contact angle measurements. A reasonably linear relation was found between the VA content on the surface (wt.%) obtained from XPS analysis and the VA content in bulk especially for PVAc/EVA-33 blend surfaces. PE segments were more enriched on the surface than that of the bulk for pure EVA copolymer surfaces similar to previous reports and VA enrichment was found on the EVA/HDPE blend surfaces due to high molecular weight of HDPE. Water theta(e) decreased with the increase in the VA content on the blend surface due to the polarity of VA. A good agreement was obtained between gamma(-)(s) and atomic oxygen surface concentration with the increase of VA content. The applicability of Cassie-Baxter equation was tested and found that it gave consistent results with the experimental water contact angles for the case where VA content was lower than 55 wt.% in the bulk composition. (C) 2011 Elsevier B. V. All rights reserved

L-MYC gene polymorphism and risk of thyroid cancer

L-myc gene polymorphism is a representative genetic trait responsible for an individual’s susceptibility to several cancers. However, there have been no reports concerning the association between thyroid cancer and L-myc gene polymorphism. Aim: To analyze the distribution of L-myc gene polymorphism in Turkish patients with thyroid disorders and thyroid cancers. Methods: We used a molecular genotyping method, polymerase chain reaction-based restriction fragment length polymorphism (PCR-RFLP). We studied 138 patients of whom 47 had multinodular goiter, 13 had follicular cancer and 69 had papillar cancer, in comparison with control group of 109 healthy individuals. Results: No significant difference in the distribution of genotypes was observed between thyroid patients and controls. Carrying SS or LS genotype revealed a 1.96-fold (95% CI 0.573–6.706) risk for the occurrence of follicular cancer when compared with controls, and 3.11-fold (95% CI 0.952–10.216), when compared with multinodular goiter patients (p = 0.04). Conclusion: We suggest that L-myc genotype profiling together with other susceptibility factors, may be useful in the screening for thyroid nodular malignancy.Для ряда опухолей человека показана корреляция между риском развития опухоли и определенным вариантом гена L-MYC. Данные о наличии такой связи при раке щитовидной железы к настоящему времени отсутствуют. Цель: проанализировать распределение полиморфных типов гена L-MYC в популяции больных с доброкачественными и злокачественными поражениями щитовидной железы, включая рак щитовидной железы, в Турции. Методы: для анализа полиморфизма гена L-MYC использован метод молекулярного генотипирования, в частности, метод определения полиморфизма длины рестрикционных фрагментов, основанный на полимеразной цепной реакции (PCR-RFLP). Определение проводили в лейкоцитах 138 больных, в том числе 48 больных с узловым зобом, 13 больных фолликулярным раком щитовидной железы и 69 больных папиллярным раком. Контрольную группу составляли 109 здоровых лиц. Результаты: статистически достоверных различий в распределении исследуемых генотипов у больных с патологией щитовидной железы и здоровых лиц не выявили. Показано, что относительный риск фолликулярного рака щитовидной железы у больных-носителей генотипа SS или LS составляет 1,96 по сравнению со здоровыми лицами (при 95% доверительном интервале от 0,573 до 6,706) и 3,11 по сравнению с больными с узловым зобом (при 95% доверительном интервале от 0,952 до 10,216) (р = 0,04). Выводы: по нашему предположению, определение профиля полиморфизма гена L-MYC с учетом других факторов, определяющих предрасположенность к развитию опухолей, может быть полезным при скрининге озлокачествления узелковых образований щитовидной железы

Topography driven spreading

Roughening a hydrophobic surface enhances its nonwetting properties into superhydrophobicity. For liquids other than water, roughness can induce a complete rollup of a droplet. However, topographic effects can also enhance partial wetting by a given liquid into complete wetting to create superwetting. In this work, a model system of spreading droplets of a nonvolatile liquid on surfaces having lithographically produced pillars is used to show that superwetting also modifies the dynamics of spreading. The edge speed-dynamic contact angle relation is shown to obey a simple power law, and such power laws are shown to apply to naturally occurring surfaces

Characteristics of patients operated for primary hyperparathyroidism at university hospitals in Türkiye: Differences among Türkiye's geographical regions

Purpose: The aim of this study was to define the clinical and laboratory characteristics of patients operated on for primary hyperpatathyroidism (PHPT) at university hospitals in Türkiye, and to investigate the differences in the clinical presentations of the disease between different geographical regions. Methods: Patients operated on for PHPT in the university hospitals of Türkiye were included in the study. The demographic, clinical, and laboratory findings and the operational data of the patients were investigated according to the whole country and to different geographical regions. Comparisons were performed according to whole country and regions. Results: A total of 1,162 cases were included in the study from different regions and 20 university hospitals. The mean age of patients was 52.4 ± 0.38 (mean ± standard error) in the general population of Türkiye. The rates of hypertension, urolithiasis, bone disease and 25-hydroxyvitamin D insufficiency were 35%, 18.6%, 67.6%, and 63%, respectively. The median parathormone (PTH), serum total calcium (Ca+2) and phosphorus value were 220 pg/mL (range, 70-2,500 pg/mL), 11.2 mg/dL (range, 9.5-11.2 mg/dL), and 2.4 mg/dL (range, 1-4.7 mg/dL), respectively. The median size of the adenomas resected was 16 mm (range, 4-70 mm). Significant differences were observed in the clinical and laboratory findings of the patients operated on due to PHPT between different geographical regions of Türkiye (P < 0.05). Conclusion: The clinical and laboratory characteristics of the patients with PHPT in different geographical regions of Türkiye differ. Furthermore, the general findings of the cases in Türkiye give us a hint that the severity of the disease here is somewhere between Eastern and Western countries. Copyright © 2016, the Korean Surgical Society

Characterization and simulation of cDNA microarray spots using a novel mathematical model

<p>Abstract</p> <p>Background</p> <p>The quality of cDNA microarray data is crucial for expanding its application to other research areas, such as the study of gene regulatory networks. Despite the fact that a number of algorithms have been suggested to increase the accuracy of microarray gene expression data, it is necessary to obtain reliable microarray images by improving wet-lab experiments. As the first step of a cDNA microarray experiment, spotting cDNA probes is critical to determining the quality of spot images.</p> <p>Results</p> <p>We developed a governing equation of cDNA deposition during evaporation of a drop in the microarray spotting process. The governing equation included four parameters: the surface site density on the support, the extrapolated equilibrium constant for the binding of cDNA molecules with surface sites on glass slides, the macromolecular interaction factor, and the volume constant of a drop of cDNA solution. We simulated cDNA deposition from the single model equation by varying the value of the parameters. The morphology of the resulting cDNA deposit can be classified into three types: a doughnut shape, a peak shape, and a volcano shape. The spot morphology can be changed into a flat shape by varying the experimental conditions while considering the parameters of the governing equation of cDNA deposition. The four parameters were estimated by fitting the governing equation to the real microarray images. With the results of the simulation and the parameter estimation, the phenomenon of the formation of cDNA deposits in each type was investigated.</p> <p>Conclusion</p> <p>This study explains how various spot shapes can exist and suggests which parameters are to be adjusted for obtaining a good spot. This system is able to explore the cDNA microarray spotting process in a predictable, manageable and descriptive manner. We hope it can provide a way to predict the incidents that can occur during a real cDNA microarray experiment, and produce useful data for several research applications involving cDNA microarrays.</p

Highly efficient separation of actinides from lanthanides by a phenanthroline-derived bis-triazine ligand

The synthesis, lanthanide complexation, and solvent ex- traction of actinide(III) and lanthanide(III) radiotracers from nitric acid solutions by a phenanthroline-derived quadridentate bis-triazine ligand are described. The ligand separates Am(III) and Cm(III) from the lanthanides with remarkably high efficiency, high selectivity, and fast extraction kinetics compared to its 2,2'-bipyridine counterpart. Structures of the 1:2 bis-complexes of the ligand with Eu(III) and Yb(III) were elucidated by X-ray crystallography and force field calculations, respec-tively. The Eu(III) bis-complex is the first 1:2 bis-complex of a quadridentate bis-triazine ligand to be characterized by crystallography. The faster rates of extraction were verified by kinetics measurements using the rotating membrane cell technique in several diluents. The improved kinetics of metal ion extraction are related to the higher surface activity of the ligand at the phase interface. The improvement in the ligand's properties on replacing the bipyridine unit with a phenanthroline unit far exceeds what was anticipated based on ligand design alone