154 research outputs found
Flexible Mode Modelling of the InSight Lander and Consequences for the SEIS Instrument
We present an updated model for estimating the lander mechanical noise on the InSight seismometer SEIS, taking into account the flexible modes of the InSight lander. This new flexible mode model uses the Satellite Dynamics Toolbox to compute the direct and the inverse dynamic model of a satellite composed of a main body fitted with one or several dynamic appendages. Through a detailed study of the sensitivity of our results to key environment parameters we find that the frequencies of the six dominant lander resonant modes increase logarithmically with increasing ground stiffness. On the other hand, the wind strength and the incoming wind angle modify only the signal amplitude but not the frequencies of the resonances. For the baseline parameters chosen for this study, the lander mechanical noise on the SEIS instrument is not expected to exceed the instrument total noise requirements. However, in the case that the lander mechanical noise is observable in the seismic data acquired by SEIS, this may provide a complementary method for studying the ground and wind properties on Mars
Joint inversion of long-period magnetotelluric data and surface-wave dispersion curves for anisotropic structure: Application to data from Central Germany
Geophysical datasets sensitive to different physical parameters can be used to improve resolution of Earth's internal structure. Herein, we jointly invert long-period magnetotelluric (MT) data and surface-wave dispersion curves. Our approach is based on a joint inversion using a genetic algorithm for a one-dimensional (1-D) isotropic structure, which we extend to 1-D anisotropic media. We apply our new anisotropic joint inversion to datasets from Central Germany demonstrating the capacity of our joint inversion algorithm to establish a 1-D anisotropic model that fits MT and seismic datasets simultaneously and providing new information regarding the deep structure in Central Germany. The lithosphere/asthenosphere boundary is found at approx. 84 km depth and two main anisotropic layers with coincident most conductive/seismic fast-axis direction are resolved at lower crustal and asthenospheric depths. We also quantify the amount of seismic and electrical anisotropy in the asthenosphere showing an emerging agreement between the two anisotropic coefficients
Recommended from our members
SEIS: Insight's Seismic Experiment for Internal Structure of Mars.
By the end of 2018, 42 years after the landing of the two Viking seismometers on Mars, InSight will deploy onto Mars' surface the SEIS (Seismic Experiment for Internal Structure) instrument; a six-axes seismometer equipped with both a long-period three-axes Very Broad Band (VBB) instrument and a three-axes short-period (SP) instrument. These six sensors will cover a broad range of the seismic bandwidth, from 0.01 Hz to 50 Hz, with possible extension to longer periods. Data will be transmitted in the form of three continuous VBB components at 2 sample per second (sps), an estimation of the short period energy content from the SP at 1 sps and a continuous compound VBB/SP vertical axis at 10 sps. The continuous streams will be augmented by requested event data with sample rates from 20 to 100 sps. SEIS will improve upon the existing resolution of Viking's Mars seismic monitoring by a factor of ⌠2500 at 1 Hz and ⌠200 000 at 0.1 Hz. An additional major improvement is that, contrary to Viking, the seismometers will be deployed via a robotic arm directly onto Mars' surface and will be protected against temperature and wind by highly efficient thermal and wind shielding. Based on existing knowledge of Mars, it is reasonable to infer a moment magnitude detection threshold of M w ⌠3 at 40 â epicentral distance and a potential to detect several tens of quakes and about five impacts per year. In this paper, we first describe the science goals of the experiment and the rationale used to define its requirements. We then provide a detailed description of the hardware, from the sensors to the deployment system and associated performance, including transfer functions of the seismic sensors and temperature sensors. We conclude by describing the experiment ground segment, including data processing services, outreach and education networks and provide a description of the format to be used for future data distribution.Electronic supplementary materialThe online version of this article (10.1007/s11214-018-0574-6) contains supplementary material, which is available to authorized users
First Focal Mechanisms of Marsquakes
Since February 2019, NASA's InSight lander is recording seismic signals on the planet Mars, which, for the first time, allows to observe ongoing tectonic processes with geophysical methods. A number of Marsquakes have been located in the Cerberus Fossae graben system in Elysium Planitia and further west, in the Orcus Patera depression. We present a first study of the focal mechanisms of three well-recorded events (S0173a, S0183a, S0235b) to determine the processes dominating in the source region. We infer for all three events a predominantly extensional setting. Our method is adapted to the case of a single, multicomponent receiver and based on fitting waveforms of P and S waves against synthetic seismograms computed for the initial crustal velocity model derived by the InSight team. We explore the uncertainty due to the single-station limitation and find that even data recorded by one station constrains the mechanisms (reasonably) well. For the events in the Cerberus Fossae region (S0173a, S0235b) normal faulting with a relatively steep dipping fault plane is inferred, suggesting an extensional regime mainly oriented E-W to NE-SW. The fault regime in the Orcus Patera region is not determined uniquely because only the P wave can be used for the source inversion. However, we find that the P and weak S waves of the S0183a event show similar polarities to the event S0173, which indicates similar fault regimes
The Far Side of Mars: Two Distant Marsquakes Detected by InSight
For over three Earth years the Marsquake Service has been analyzing the data sent back from the Seismic Experiment for Interior StructureÂżthe seismometer placed on the surface of Mars by NASAÂżs InSight lander. Although by October 2021, the Mars seismic catalog included 951 events, until recently all these events have been assessed as lying within a radius of 100° of InSight. Here we report two distant events that occurred within days of each other, located on the far side of Mars, giving us our first glimpse into MarsÂż core shadow zone. The first event, recorded on 25 August 2021 (InSight sol 976), shows clear polarized arrivals that we interpret to be PP and SS phases at low frequencies and locates to Valles Marineris, 146° ± 7° from InSight. The second event, occurring on 18 September 2021 (sol 1000), has significantly more broadband energy with emergent PP and SS arrivals, and a weak phase arriving before PP that we interpret as PdiffÂż. Considering uncertain pick times and poorly constrained travel times for PdiffÂż, we estimate this event is at a distance between 107° and 147° from InSight. With magnitudes of MMaw 4.2 and 4.1, respectively, these are the largest seismic events recorded so far on Mars.Anna C. Horleston, Jessica C. E. Irving,and Nicholas A. Teanby are funded by the UKSA under Grant Numbers ST/R002096/1, ST/W002523/1, and ST/W002515/1.Nikolaj L. Dahmen, Cecilia Duran, GĂ©raldine ZenhĂ€usern, andSimon C. StĂ€hler would like to acknowledge support from Eidgenössische Technische Hochschule (ETH) through the ETH+ funding scheme (ETH+02 19-1: âPlanet Marsâ). The French coauthors acknowledge the funding support provided by CNES and the Agence Nationale de la Recherche (ANR-19-CE31-0008-08 MAGIS) for SEIS operation and SEIS Science analysis. Alexander E. Stott acknowledges the French Space Agency CNES and ANR (ANR-19-CE31-0008-08). Caroline Beghein and Jiaqi Li were supported by NASA InSight Participating Scientist Program (PSP) Grant Number 80NSSC18K1679. This article is InSight Contribution Number 236
Seismic Constraints on the Thickness and Structure of the Martian Crust from InSight
NASAÂżs InSight mission [1] has for
the first time placed a very broad-band seismometer on
the surface of Mars. The Seismic Experiment for
Interior Structure (SEIS) [2] has been collecting
continuous data since early February 2019. The main
focus of InSight is to enhance our understanding of the
internal structure and dynamics of Mars, which includes
the goal to better constrain the crustal thickness of the
planet [3]. Knowing the present-day crustal thickness of
Mars has important implications for its thermal
evolution [4] as well as for the partitioning of silicates
and heat-producing elements between the different
layers of Mars. Current estimates for the crustal
thickness of Mars are based on modeling the
relationship between topography and gravity [5,6], but
these studies rely on different assumptions, e.g. on the
density of the crust and upper mantle, or the bulk silicate
composition of the planet and the crust. The resulting
values for the average crustal thickness differ by more
than 100%, from 30 km to more than 100 km [7].
New independent constraints from InSight will be
based on seismically determining the crustal thickness
at the landing site. This single firm measurement of
crustal thickness at one point on the planet will allow to
constrain both the average crustal thickness of Mars as
well as thickness variations across the planet when
combined with constraints from gravity and topography
[8]. Here we describe the determination of the crustal
structure and thickness at the InSight landing site based
on seismic receiver functions for three marsquakes
compared with autocorrelations of InSight data [9].We acknowledge NASA, CNES, partner agencies and institutions (UKSA, SSO,DLR, JPL, IPGP-CNRS, ETHZ, IC, MPS-MPG) and the operators of JPL, SISMOC, MSDS, IRIS-DMC and PDS for providing SEED SEIS data. InSight data is archived in the PDS, and a full list of archives in the Geosciences, Atmospheres, and Imaging nodes is at https://pds-geosciences.wustl.edu/missions/insight/. This work was partially carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration. ©2021, California Institute of Technology. Government sponsorship acknowledge
Autocorrelation of the Ground Vibrations Recorded by the SEISâInSight Seismometer on Mars
Since early February 2019, the SEIS (Seismic Experiment for Interior Structure)
seismometer deployed at the surface of Mars in the framework of the InSight mission has been
continuously recording the ground motion at Elysium Planitia. In this study, we take advantage of this
exceptional data set to put constraints on the crustal properties of Mars using seismic interferometry (SI).
To carry out this task, we first examine the continuous records from the very broadband seismometer.
Several deterministic sources of environmental noise are identified and specific preprocessing strategies
are presented to mitigate their influence. Applying the principles of SI to the single-station configuration
of InSight, we compute, for each Sol and each hour of the martian day, the diagonal elements of the
time-domain correlation tensor of random ambient vibrations recorded by SEIS. A similar computation
is performed on the diffuse waveforms generated by more than a hundred Marsquakes. A careful signal-
to-noise ratio analysis and an inter-comparison between the two datasets suggest that the results from
SI are most reliable in a narrow frequency band around 2.4 Hz, where an amplification of both ambient
vibrations and seismic events is observed. The average autocorrelation functions (ACFs) contain well
identifiable seismic arrivals, that are very consistent between the two datasets. Interpreting the vertical
and horizontal ACFs as, respectively, the P- and S- seismic reflectivity below InSight, we propose a simple
stratified velocity model of the crust, which is mostly compatible with previous results from receiver
function analysis. Our results are discussed and compared to recent works from the literature
Surface waves and crustal structure on Mars
We detected surface waves from two meteorite impacts on Mars. By measuring group velocity dispersion along the impact-lander path, we obtained a direct constraint on crustal structure away from the InSight lander. The crust north of the equatorial dichotomy had a shear wave velocity of approximately 3.2 kilometers per second in the 5- to 30-kilometer depth range, with little depth variation. This implies a higher crustal density than inferred beneath the lander, suggesting either compositional differences or reduced porosity in the volcanic areas traversed by the surface waves. The lower velocities and the crustal layering observed beneath the landing site down to a 10-kilometer depth are not a global feature. Structural variations revealed by surface waves hold implications for models of the formation and thickness of the martian crust.D.K., S.C., D.G., J.C., C.D., A. K., S.C.S., N.D., and G.Z. were supported by the ETH+ funding scheme (ETH+02 19-1: âPlanet Marsâ). Marsquake Service operations at ETH ZĂŒrich were supported by ETH Research grant ETH-06 17-02. N.C.S. and V.L. were supported by NASA PSP grant no. 80NSSC18K1628. Q.H. and E.B. are funded by NASA
grant 80NSSC18K1680. C.B. and J.L. were supported by NASA InSight PSP grant no. 80NSSC18K1679. S.D.K. was supported by NASA InSight PSP grant no. 80NSSC18K1623. P.L., E.B., M.D., H.S., E.S., M.W., Z.X., T.W., M.P., R.F.G. were supported by CNES and the Agence Nationale de la Recherche (ANR-19-CE31-0008-08 MAGIS) for SEIS operation and SEIS Science analysis. A.H., C.C. and W.T.P. were supported by the UKSA under grant nos. ST/R002096/1, ST/ W002523/1 and ST/V00638X/1. Numerical computations of McMC Approach 2 were performed on the S-CAPAD/DANTE platform (IPGP, France) and using the HPC resources of IDRIS under the allocation A0110413017 made by GENCI. A.H. was supported by the UKSA under grant nos. ST/R002096/1 and ST/W002523/1. F.N. was supported by InSight PSP 80NSSC18K1627. I.J.D. was supported by NASA InSight PSP grant no. 80NSSC20K0971. L.V.P. was funded by NASANNN12AA01C with subcontract JPL-1515835. The research was carried out in part by W.B.B., M.G. and M.P.P. at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration (80NM0018D0004)Peer reviewe
The interior of Mars as seen by InSight (Invited)
InSight is the first planetary mission dedicated to exploring the whole interior of a planet using geophysical methods, specifically seismology and geodesy. To this end, we observed seismic waves of distant marsquakes and inverted for interior models using differential travel times of phases reflected at the surface (PP, SS...) or the core mantle-boundary (ScS), as well as those converted at crustal interfaces. Compared to previous orbital observations1-3, the seismic data added decisive new insights with consequences for the formation of Mars: The global average crustal thickness of 24-75 km is at the low end of pre-mission estimates5. Together with the the thick lithosphere of 450-600 km5, this requires an enrichment of heat-producing elements in the crust by a factor of 13-20, compared to the primitive mantle. The iron-rich liquid core is 1790-1870 km in radius6, which rules out the existence of an insulating bridgmanite-dominated lower mantle on Mars. The large, and therefore low-density core needs a high amount of light elements. Given the geochemical boundary conditions, Sulfur alone cannot explain the estimated density of ~6 g/cm3 and volatile elements, such as oxygen, carbon or hydrogen are needed in significant amounts. This observation is difficult to reconcile with classical models of late formation from the same material as Earth. We also give an overview of open questions after three years of InSight operation on the surface of Mars, such as the potential existence of an inner core or compositional layers above the CM
- âŠ