18 research outputs found
The Soreq Applied Research Accelerator Facility (SARAF) - Overview, Research Programs and Future Plans
The Soreq Applied Research Accelerator Facility (SARAF) is under construction
in the Soreq Nuclear Research Center at Yavne, Israel. When completed at the
beginning of the next decade, SARAF will be a user facility for basic and
applied nuclear physics, based on a 40 MeV, 5 mA CW proton/deuteron
superconducting linear accelerator. Phase I of SARAF (SARAF-I, 4 MeV, 2 mA CW
protons, 5 MeV 1 mA CW deuterons) is already in operation, generating
scientific results in several fields of interest. The main ongoing program at
SARAF-I is the production of 30 keV neutrons and measurement of Maxwellian
Averaged Cross Sections (MACS), important for the astrophysical s-process. The
world leading Maxwellian epithermal neutron yield at SARAF-I (
epithermal neutrons/sec), generated by a novel Liquid-Lithium Target (LiLiT),
enables improved precision of known MACSs, and new measurements of
low-abundance and radioactive isotopes. Research plans for SARAF-II span
several disciplines: Precision studies of beyond-Standard-Model effects by
trapping light exotic radioisotopes, such as He, Li and
Ne, in unprecedented amounts (including meaningful studies already
at SARAF-I); extended nuclear astrophysics research with higher energy
neutrons, including generation and studies of exotic neutron-rich isotopes
relevant to the rapid (r-) process; nuclear structure of exotic isotopes; high
energy neutron cross sections for basic nuclear physics and material science
research, including neutron induced radiation damage; neutron based imaging and
therapy; and novel radiopharmaceuticals development and production. In this
paper we present a technical overview of SARAF-I and II, including a
description of the accelerator and its irradiation targets; a survey of
existing research programs at SARAF-I; and the research potential at the
completed facility (SARAF-II).Comment: 32 pages, 31 figures, 10 tables, submitted as an invited review to
European Physics Journal
Neutron and isotope production yield from proton and deuteron beams in the 20–45 MeV range on thick liquid gallium-indium and lithium targets
In the international atomic energy agency report on compact accelerator based neutron sources, IAEA-TECDOC-1981, Table 1 lists the typical source strength necessary for different techniques using neutrons. According to that table a neutron source of 1015 neutrons per second is strong enough for almost all neutron techniques. The Soreq Applied Research Accelerator Facility (SARAF) is being built as a high current (5 mA), low energy (40 MeV), proton/deuteron, compact accelerator based neutron source. SARAF has developed a liquid gallium-indium jet target for its neutron source. The measurements published here will show that a a liquid gallium-indium jet target could provide the 1015 neutrons per second source needed for SARAF and should be considered as a possible target and neutron source also for other facilities of its kind
Prostaglandin E2 Suppresses NK Activity In Vivo and Promotes Postoperative Tumor Metastasis in Rats
Fast chopper for single radio-frequency quadrupole bunch selection for neutron time-of-flight capabilities
A fast chopper system has been developed and tested for single bunch selection with the radio-frequency quadrupole (RFQ) accelerating element of the Soreq Applied Research Accelerator Facility (SARAF). The fast chopper consists of a high voltage (HV) deflector just before the RFQ, providing both positive and negative HV deflections and fast HV switching between polarities to enable momentary transmission of a single prebunch to the RFQ. Presently, the system enables single bunch selection for protons and deuterons at a repetition rate as determined by the user of up to 200Â kHz, with bunch transmission of up to 50%, and with neighboring bunch contamination of less than 15%. Single bunch selection provides SARAF with fast neutron time-of-flight (TOF) capabilities. Measurements performed with liquid scintillation detectors show clear gamma and neutrons peaks, with TOF resolution of about 1 nanosecond FWHM. Beam dynamics simulations suggest possibilities for further improvements of the fast chopper and single bunch selection characteristics, with a significant lowering or elimination of the neighboring bunches, enhanced TOF resolution, and increased repetition rate to above 200Â kHz. Fast neutron TOF capabilities, especially at phase II of SARAF, will provide exceptional opportunities for neutron induced reaction measurements for nuclear technology and fundamental research
Identifying a Roman Casting Pit at Tel Dor, Israel: Integrating Field and Laboratory Research
The Soreq Applied Research Accelerator Facility (SARAF): Overview, research programs and future plans
The Soreq Applied Research Accelerator Facility (SARAF) is under construction
in the Soreq Nuclear Research Center at Yavne, Israel. When completed at the
beginning of the next decade, SARAF will be a user facility for basic and
applied nuclear physics, based on a 40 MeV, 5 mA CW proton/deuteron
superconducting linear accelerator. Phase I of SARAF (SARAF-I, 4 MeV, 2 mA CW
protons, 5 MeV 1 mA CW deuterons) is already in operation, generating
scientific results in several fields of interest. The main ongoing program at
SARAF-I is the production of 30 keV neutrons and measurement of Maxwellian
Averaged Cross Sections (MACS), important for the astrophysical s-process. The
world leading Maxwellian epithermal neutron yield at SARAF-I (
epithermal neutrons/sec), generated by a novel Liquid-Lithium Target (LiLiT),
enables improved precision of known MACSs, and new measurements of
low-abundance and radioactive isotopes. Research plans for SARAF-II span
several disciplines: Precision studies of beyond-Standard-Model effects by
trapping light exotic radioisotopes, such as He, Li and
Ne, in unprecedented amounts (including meaningful studies already
at SARAF-I); extended nuclear astrophysics research with higher energy
neutrons, including generation and studies of exotic neutron-rich isotopes
relevant to the rapid (r-) process; nuclear structure of exotic isotopes; high
energy neutron cross sections for basic nuclear physics and material science
research, including neutron induced radiation damage; neutron based imaging and
therapy; and novel radiopharmaceuticals development and production. In this
paper we present a technical overview of SARAF-I and II, including a
description of the accelerator and its irradiation targets; a survey of
existing research programs at SARAF-I; and the research potential at the
completed facility (SARAF-II).Comment: 32 pages, 31 figures, 10 tables, submitted as an invited review to
European Physics Journal