Prevalence of pulmonary hypertension in the general population

Copyrigh

Charge carrier dynamics and photocatalytic behavior of TiO2 nanopowders submitted to hydrothermal or conventional heat treatment

The sol–gel technique followed by conventional (TiO2-1) and hydrothermal (TiO2-2) thermal treatment was employed to prepare TiO2-based photocatalysts with distinct particle sizes and crystalline structures. The as prepared metal oxides were evaluated as photocatalysts for gaseous HCHO degradation, methanol, and dye oxidation reactions. Additionally, metallic platinum was deposited on the TiO2 surfaces and H2 evolution measurements were performed. The photocatalytic activities were rationalized in terms of morphologic parameters along with the electron/hole dynamics obtained from transient absorption spectroscopy (TAS). TiO2-2 exhibits smaller particle size, poorer crystallinity, and higher surface area than TiO2-1. Moreover the hydrothermal treatment leads to formation of the metastable brookite phase, while TiO2-1 exhibits only the anatase phase. TAS measurements show that the electron/hole recombination of TiO2-2 is faster than that of the latter. Despite that, TiO2-2 exhibits higher photonic efficiencies for photocatalytic oxidation reactions, which is attributed to its larger surface area that compensates for the decrease of the surface charge carrier concentration. For H2 evolution, it was found that the surface area has only a minor effect and the photocatalyst performance is controlled by the efficiency of the electron transfer to the platinum islands. This process is facilitated by the higher crystallinity of TiO2-1, which exhibits higher photonic efficiency for H2 evolution than that observed for TiO2-2. The results found here provide new insights into the correlations between thermal treatment conditions and photocatalytic activity and will be useful for the design of high performance photocatalysts.Fundac˜ao de Amparo `a Pesquisa do Estado de Minas GeraisConselho Nacional de Desenvolvimento Cientif´ıco e Tecnolog´ıcoCoordenac˜ao de Aperfeiçoamento de Pessoal de N´ıvel SuperiorDFG/BA 1137/8-

Desenvolvimento do fruto da lichieira (Litchi chinensis Sonn.) 'Bengal'

Estudou-se o desenvolvimento do fruto da lichieira (Litchi chinensis Sonn.) 'Bengal'. Realizaram-se amostragens semanais, com início aos 35 dias após a antese e término no início da senescência dos frutos. A partir do 77º dia após a antese, os frutos foram decompostos em pericarpo, semente e arilo. A antese ocorreu na primeira semana de setembro. Foram ajustados modelos sigmoidais simples para acúmulo de matéria seca, comprimento e diâmetro. Para o acúmulo de matéria seca, uma fase inicial, de crescimento lento, prolongou-se até o 63º dia após a antese e coincidiu com um período de intensa queda natural de frutos. Do 63º ao 98º dia após a antese, houve uma fase de rápido acúmulo de matéria seca. Até o 77º dia, pericarpo e semente foram os principais responsáveis pelo acúmulo de matéria seca. Oitenta e oito por cento do comprimento e 65% do diâmetro máximos foram atingidos nesse período. Do 84º ao 98º dia após a antese, o desenvolvimento do fruto foi determinado basicamente pelo arilo. As dimensões e a matéria seca do fruto estabilizaram-se a partir do 98º dia após a antese. O ponto de colheita comercial dos frutos, caracterizado pela coloração avermelhada do pericarpo, ocorreu a partir do 112º dia após a antese. Verificou-se um quadro senescente nos frutos a partir do 119º dia após a antese.It was studied the fruit development in 'Bengal' litchi (Litchi chinensis Sonn.). The samples were taken weekly 35 days after anthesis until the beginning of fruit senescence. From the 77th day after anthesis, fruits were decomposed in pericarp, aril and seed. Anthesis occurred in the first week of September. The fruit dry matter, length and diameter followed a single-sigmoid pattern. For dry matter accumulation, an initial phase, of slow growth, ended the 63rd day after anthesis and was coincident with a period of intense fruit drop. The next phase occurred from the 63rd to the 98th day and showed a rapid dry matter accumulation. Until the 77th day, the main increment in fruit dry matter was due to pericarp and seed growth. Eighty eight percent of the maximum length and 65% of the maximum diameter were reached at the end of this phase. From the 84th until the 98th day after anthesis, fruit growth was determined, basically, by aril. Fruit dimensions and dry matter were stabilized after the 98th day. The commercial harvest of the fruits, characterized by the reddish color of the pericarp, occurred at the 112th day after anthesis. Fruits at the 119th day after anthesis were senescent

RICORS2040 : The need for collaborative research in chronic kidney disease

Chronic kidney disease (CKD) is a silent and poorly known killer. The current concept of CKD is relatively young and uptake by the public, physicians and health authorities is not widespread. Physicians still confuse CKD with chronic kidney insufficiency or failure. For the wider public and health authorities, CKD evokes kidney replacement therapy (KRT). In Spain, the prevalence of KRT is 0.13%. Thus health authorities may consider CKD a non-issue: very few persons eventually need KRT and, for those in whom kidneys fail, the problem is 'solved' by dialysis or kidney transplantation. However, KRT is the tip of the iceberg in the burden of CKD. The main burden of CKD is accelerated ageing and premature death. The cut-off points for kidney function and kidney damage indexes that define CKD also mark an increased risk for all-cause premature death. CKD is the most prevalent risk factor for lethal coronavirus disease 2019 (COVID-19) and the factor that most increases the risk of death in COVID-19, after old age. Men and women undergoing KRT still have an annual mortality that is 10- to 100-fold higher than similar-age peers, and life expectancy is shortened by ~40 years for young persons on dialysis and by 15 years for young persons with a functioning kidney graft. CKD is expected to become the fifth greatest global cause of death by 2040 and the second greatest cause of death in Spain before the end of the century, a time when one in four Spaniards will have CKD. However, by 2022, CKD will become the only top-15 global predicted cause of death that is not supported by a dedicated well-funded Centres for Biomedical Research (CIBER) network structure in Spain. Realizing the underestimation of the CKD burden of disease by health authorities, the Decade of the Kidney initiative for 2020-2030 was launched by the American Association of Kidney Patients and the European Kidney Health Alliance. Leading Spanish kidney researchers grouped in the kidney collaborative research network Red de Investigación Renal have now applied for the Redes de Investigación Cooperativa Orientadas a Resultados en Salud (RICORS) call for collaborative research in Spain with the support of the Spanish Society of Nephrology, Federación Nacional de Asociaciones para la Lucha Contra las Enfermedades del Riñón and ONT: RICORS2040 aims to prevent the dire predictions for the global 2040 burden of CKD from becoming true

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data