2,953 research outputs found

    Localisation of partial discharge sources using radio fingerprinting technique

    Get PDF
    Partial discharge (PD) is a well-known indicator of the failure of insulators in electrical plant. Operators are pushing toward lower operating cost and higher reliability and this stimulates a demand for a diagnostic system capable of accurately locating PD sources especially in ageing electricity substations. Existing techniques used for PD source localisation can be prohibitively expensive. In this paper, a cost-effective radio fingerprinting technique is proposed. This technique uses the Received Signal Strength (RSS) extracted from PD measurements gathered using RF sensors. The proposed technique models the complex spatial characteristics of the radio environment, and uses this model for accurate PD localisation. Two models were developed and compared: k-nearest neighbour and a feed-forward neural network which uses regression as a form of function approximation. The results demonstrate that the neural network produced superior performance as a result of its robustness against noise

    The WW Boson Loop Background to H -> ZZ at Photon-photon Colliders

    Full text link
    We have performed a complete one-loop calculation of γγZZ\gamma \gamma \rightarrow ZZ in the Standard Model, including both gauge bosons and fermions in the loop. We confirm the large irreducible continuum background from the WW-boson loop found by Jikia. We have included the photon-photon luminosity, and find that the continuum background of transverse ZZ boson pairs prohibits finding a heavy Higgs with mass \gtap 350 GeV in this decay mode.Comment: 16 pages + 4 PS figures included (uuencoded), MAD/PH/77

    Production of ZZ Boson Pairs at Photon Linear Colliders

    Full text link
    The ZZZZ pair production rate in high energy γγ\gamma \gamma collisions is evaluated with photons from laser backscattering. We find that searching for the Standard Model Higgs boson with a mass up to, or slightly larger than, 400 GeV via the ZZZZ final state is possible via photon fusion with backscattered laser photons at a linear e+ee^+e^- collider with energies in the range 600 GeV <se+e<< \sqrt{s_{e^+e^-}} < 1000 GeV.Comment: 18 pages in REVTEX, Figures available upon request, DOE-ER40757-024,CPP-93-24 and FSU-HEP-93080

    Predictions for Z-Boson Production in Association with a b-Jet at O(αs3)

    Full text link
    Precise predictions are provided for the production of a Z boson and a b-jet in hadron-hadron collisions within the framework of perturbative QCD, at O(α3s). To obtain these predictions, we perform the first calculation of a hadronic scattering process involving the direct production of a flavored jet at next-to-next-to-leading-order accuracy in massless QCD and extend techniques to also account for the impact of finite heavy-quark mass effects. The predictions are compared to CMS data obtained in pp collisions at a center-of-mass energy of 8 TeV, which are the most precise data from run I of the LHC for this process, where a good description of the data is achieved. To allow this comparison, we have performed an unfolding of the data, which overcomes the long-standing issue that the experimental and theoretical definitions of jet flavor are incompatible

    VH + jet production in hadron-hadron collisions up to order α3s in perturbative QCD

    Full text link
    We present precise predictions for the hadronic production of an on-shell Higgs boson in association with a leptonically decaying gauge boson and a jet up to order α3s. We include the complete set of NNLO QCD corrections to both charged- and neutral-current Drell-Yan type contributions, as well as the previously known leading heavy quark loop induced contributions which involve a direct Higgs-quark coupling. As an application, we study a range of differential observables in proton-proton collisions at s√ = 13 TeV for both the charged- and neutral-current production modes. For each Higgs production process, we assess the improvement in the theoretical uncertainty for both the exclusive (njet = 1) and inclusive (njet ≥ 1) jet categories. We find that the inclusion of the NNLO corrections to the Drell-Yan type contributions is essential in stabilising the predictions and in reducing the theoretical uncertainty for both inclusive and exclusive jet production for all three modes. This is particularly true in the kinematical regimes associated with low to medium values of the transverse momentum of the produced vector boson and where the differential cross sections are the largest. For the neutral-current process, we find that the heavy quark loop induced contributions have their largest phenomenological impact (an increase in the size of the NNLO corrections, a distortion of the distribution shape and an enlargement of the left over remaining uncertainties) in kinematical regions associated to large values of pT,Z (typically above 150 GeV) where the cross sections are smaller

    Dynamic Collection Scheduling Using Remote Asset Monitoring: Case Study in the UK Charity Sector

    Get PDF
    Remote sensing technology is now coming onto the market in the waste collection sector. This technology allows waste and recycling receptacles to report their fill levels at regular intervals. This reporting enables collection schedules to be optimized dynamically to meet true servicing needs in a better way and so reduce transport costs and ensure that visits to clients are made in a timely fashion. This paper describes a real-life logistics problem faced by a leading UK charity that services its textile and book donation banks and its high street stores by using a common fleet of vehicles with various carrying capacities. Use of a common fleet gives rise to a vehicle routing problem in which visits to stores are on fixed days of the week with time window constraints and visits to banks (fitted with remote fill-monitoring technology) are made in a timely fashion so that the banks do not become full before collection. A tabu search algorithm was developed to provide vehicle routes for the next day of operation on the basis of the maximization of profit. A longer look-ahead period was not considered because donation rates to banks are highly variable. The algorithm included parameters that specified the minimum fill level (e.g., 50%) required to allow a visit to a bank and a penalty function used to encourage visits to banks that are becoming full. The results showed that the algorithm significantly reduced visits to banks and increased profit by up to 2.4%, with the best performance obtained when the donation rates were more variable

    Genetic diversity within and among Atlantic cod (Gadus morhua) farmed in marine cages: a proof-of-concept study for the identification of escapees

    Get PDF
    This study presents a molecular genetic characterization of Atlantic cod reared in commercial marine farms. Samples consisted of approximately 47 fish collected from nine cages located on four farms throughout Norway. In addition, 28 farmed escapees were recaptured in the sea (443 fish in total). Nine microsatellite loci and the Pan I gene were analysed, revealing a total of 181 alleles. Each sample contained 43–63% of total allelic variation. Comparing variation with published data for wild cod indicates that lower genetic variation exists within single cages than in wild populations. Significant linkage disequilibrium was observed amongst pairs of loci in all samples, suggesting a low number of contributing parental fish. Global FST was 0.049, and the highest pairwise FST value (pooled loci) was 0.085. For single loci, the Pan I gene was the most diagnostic, displaying a global FST of 0.203. Simulations amongst the samples collected on farms revealed an overall correct self-assignment percentage of 75%, demonstrating a high probability of identifying individuals to their farm of origin. Identification of the 28 escapees revealed a single cage as the most likely source of origin for half of the escapees, whilst the remaining fish were assigned to a mixture of samples, suggesting more than one source of escapees

    Intramolecular vibronic dynamics in molecular solids: C60

    Get PDF
    Vibronic coupling in solid C60 has been investigated with a combination of resonant photoemission spectroscopy (RPES) and resonant inelastic x-ray scattering (RIXS). Excitation as a function of energy within the lowest unoccupied molecular orbital resonance yielded strong oscillations in intensity and dispersion in RPES, and a strong inelastic component in RIXS. Reconciling these two observations establishes that vibronic coupling in this core hole excitation leads to predominantly inelastic scattering and localization of the excited vibrations on the molecule on a femtosecond time scale. The coupling extends throughout the widths of the frontier valence bands.

    Feynman Diagrams and Differential Equations

    Full text link
    We review in a pedagogical way the method of differential equations for the evaluation of D-dimensionally regulated Feynman integrals. After dealing with the general features of the technique, we discuss its application in the context of one- and two-loop corrections to the photon propagator in QED, by computing the Vacuum Polarization tensor exactly in D. Finally, we treat two cases of less trivial differential equations, respectively associated to a two-loop three-point, and a four-loop two-point integral. These two examples are the playgrounds for showing more technical aspects about: Laurent expansion of the differential equations in D (around D=4); the choice of the boundary conditions; and the link among differential and difference equations for Feynman integrals.Comment: invited review article from Int. J. Mod. Phys.

    EXOGEN ultrasound bone healing system for long bone fractures with non-union or delayed healing: a NICE medical technology guidance

    Get PDF
    Open Access. This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.This article has been made available through the Brunel Open Access Publishing Fund.A routine part of the process for developing National Institute for Health and Care Excellence (NICE) medical technologies guidance is a submission of clinical and economic evidence by the technology manufacturer. The Birmingham and Brunel Consortium External Assessment Centre (EAC; a consortium of the University of Birmingham and Brunel University) independently appraised the submission on the EXOGEN bone healing system for long bone fractures with non-union or delayed healing. This article is an overview of the original evidence submitted, the EAC’s findings, and the final NICE guidance issued.The Birmingham and Brunel Consortium is funded by NICE to act as an External Assessment Centre for the Medical Technologies Evaluation Programme
    corecore