47 research outputs found

    Ground-based detection of a cloud of methanol from Enceladus: When is a biomarker not a biomarker?

    Get PDF
    Saturn's moon Enceladus has vents emerging from a sub-surface ocean, offering unique probes into the liquid environment. These vents drain into the larger neutral torus in orbit around Saturn. We present a methanol (CH3OH) detection observed with IRAM 30-m from 2008 along the line-of-sight through Saturn's E-ring. Additionally, we also present supporting observations from the Herschel public archive of water (ortho-H2O; 1669.9 GHz) from 2012 at a similar elongation and line-of-sight. The CH3OH 5(1,1)-4(1,1) transition was detected at 5.9 sigma confidence. The line has 0.43 km/s width and is offset by +8.1 km/s in the moon's reference frame. Radiative transfer models allow for gas cloud dimensions from 1750 km up to the telescope beam diameter ~73000 km. Taking into account the CH3OH lifetime against solar photodissociation and the redshifted line velocity, there are two possible explanations for the CH3OH emission: methanol is primarily a secondary product of chemical interactions within the neutral torus that (1) spreads outward throughout the E-ring or (2) originates from a compact, confined gas cloud lagging Enceladus by several km/s. We find either scenario to be consistent with significant redshifted H2O emission (4 sigma) measured from the Herschel public archive. The measured CH3OH:H2O abundance (> 0.5 per cent) significantly exceeds the observed abundance in the direct vicinity of the vents (~0.01 per cent), suggesting CH3OH is likely chemically processed within the gas cloud with methane (CH4) as its parent species.Comment: 16 pages, 4 figures, accepted for publication in the International Journal of Astrobiology (IJA

    The JCMT dense gas survey of the Perseus Molecular Cloud

    Full text link
    We present the results of a large-scale survey of the very dense gas in the Perseus molecular cloud using HCO+ and HCN (J = 4 - 3) transitions. We have used this emission to trace the structure and kinematics of gas found in pre- and protostellar cores, as well as in outflows. We compare the HCO+/HCN data, highlighting regions where there is a marked discrepancy in the spectra of the two emission lines. We use the HCO+ to identify positively protostellar outflows and their driving sources, and present a statistical analysis of the outflow properties that we derive from this tracer. We find that the relations we calculate between the HCO+ outflow driving force and the Menv and Lbol of the driving source are comparable to those obtained from similar outflow analyses using 12CO, indicating that the two molecules give reliable estimates of outflow properties. We also compare the HCO+ and the HCN in the outflows, and find that the HCN traces only the most energetic outflows, the majority of which are driven by young Class 0 sources. We analyse the abundances of HCN and HCO+ in the particular case of the IRAS 2A outflows, and find that the HCN is much more enhanced than the HCO+ in the outflow lobes. We suggest that this is indicative of shock-enhancement of HCN along the length of the outflow; this process is not so evident for HCO+, which is largely confined to the outflow base.Comment: 25 pages, 14 figures, 9 table

    The James Clerk Maxwell telescope dense gas survey of the Perseus molecular cloud

    Get PDF
    This is the final version of the article. Available from the publisher via the DOI in this record.We present the results of a large-scale survey of the very dense (n > 106 cm-3) gas in the Perseus molecular cloud using HCO+ and HCN (J = 4 → 3) transitions. We have used this emission to trace the structure and kinematics of gas found in pre- and protostellar cores, as well as in outflows. We compare the HCO+/HCN data, highlighting regions where there is a marked discrepancy in the spectra of the two emission lines. We use the HCO+ to identify positively protostellar outflows and their driving sources, and present a statistical analysis of the outflow properties that we derive from this tracer. We find that the relations we calculate between the HCO+ outflow driving force and the Menv and Lbol of the driving source are comparable to those obtained from similar outflow analyses using 12CO, indicating that the two molecules give reliable estimates of outflow properties. We also compare the HCO+ and the HCN in the outflows, and find that the HCN traces only the most energetic outflows, the majority of which are driven by young Class 0 sources. We analyse the abundances of HCN and HCO+ in the particular case of the IRAS 2A outflows, and find that the HCN is much more enhanced than the HCO+ in the outflow lobes. We suggest that this is indicative of shock enhancement of HCN along the length of the outflow; this process is not so evident for HCO+, which is largely confined to the outflow base. © 2014 The Authors Published by Oxford University Press on behalf of the Royal Astronomical Society.SLW-S and JH are funded by the Science and Technology Facilities Council of the UK. The James Clerk Maxwell Telescope is operated by the Joint Astronomy Centre on behalf of the Science and Technology Facilities Council of the United Kingdom, the National Research Council of Canada and (until 2013 March 31) the Netherlands Organisation for Scientific Researc

    HCO+ detection of dust-depleted gas in the inner hole of the LkCa 15 pre-transitional disk

    Get PDF
    LkCa 15 is an extensively studied star in the Taurus region, known for its pre-transitional disk with a large inner cavity in the dust continuum and normal gas accretion rate. The most popular hypothesis to explain the LkCa 15 data invokes one or more planets to carve out the inner cavity, while gas continues to flow across the gap from the outer disk onto the central star. We present spatially unresolved HCO+ J = 4 → 3 observations of the LkCa 15 disk from the James Clerk Maxwell telescope (JCMT) and model the data with the ProDiMo code. We find that: (1) HCO+ line-wings are clearly detected, certifying the presence of gas in the cavity within ≲50 au of the star. (2) Reproducing the observed line-wing flux requires both a significant suppression of cavity dust (by a factor ≥ 104 compared to the interstellar medium (ISM)) and a substantial increase in the gas scale-height within the cavity (H0/R0 ∼ 0.6). An ISM dust-to-gas ratio (d:g = 10-2) yields too little line-wing flux, regardless of the scale-height or cavity gas geometry, while a smaller scale-height also under-predicts the flux even with a reduced d:g. (3) The cavity gas mass is consistent with the surface density profile of the outer disk extended inwards to the sublimation radius (corresponding to mass Md ∼ 0.03 M⊙), and masses lower by a factor ≥10 appear to be ruled out.Publisher PDFPeer reviewe

    The JCMT Gould Belt Survey: Evidence for radiative heating in Serpens MWC 297 and its influence on local star formation

    Get PDF
    We present SCUBA-2 450micron and 850micron observations of the Serpens MWC 297 region, part of the JCMT Gould Belt Survey of nearby star-forming regions. Simulations suggest that radiative feedback influences the star-formation process and we investigate observational evidence for this by constructing temperature maps. Maps are derived from the ratio of SCUBA-2 fluxes and a two component model of the JCMT beam for a fixed dust opacity spectral index of beta = 1.8. Within 40 of the B1.5Ve Herbig star MWC 297, the submillimetre fluxes are contaminated by free-free emission with a spectral index of 1.03+-0.02, consistent with an ultra-compact HII region and polar winds/jets. Contamination accounts for 73+-5 per cent and 82+-4 per cent of peak flux at 450micron and 850micron respectively. The residual thermal disk of the star is almost undetectable at these wavelengths. Young Stellar Objects are confirmed where SCUBA-2 850micron clumps identified by the fellwalker algorithm coincide with Spitzer Gould Belt Survey detections. We identify 23 objects and use Tbol to classify nine YSOs with masses 0.09 to 5.1 Msun. We find two Class 0, one Class 0/I, three Class I and three Class II sources. The mean temperature is 15+-2K for the nine YSOs and 32+-4K for the 14 starless clumps. We observe a starless clump with an abnormally high mean temperature of 46+-2K and conclude that it is radiatively heated by the star MWC 297. Jeans stability provides evidence that radiative heating by the star MWC 297 may be suppressing clump collapse.Comment: 24 pages, 13 figures, 7 table

    The JCMT Gould Belt Survey: A First Look at the Auriga–California Molecular Cloud with SCUBA-2

    Get PDF
    We present 850 and 450 μm observations of the dense regions within the Auriga–California molecular cloud using SCUBA-2 as part of the JCMT Gould Belt Legacy Survey to identify candidate protostellar objects, measure the masses of their circumstellar material (disk and envelope), and compare the star formation to that in the Orion A molecular cloud. We identify 59 candidate protostars based on the presence of compact submillimeter emission, complementing these observations with existing Herschel/SPIRE maps. Of our candidate protostars, 24 are associated with young stellar objects (YSOs) in the Spitzer and Herschel/PACS catalogs of 166 and 60 YSOs, respectively (177 unique), confirming their protostellar nature. The remaining 35 candidate protostars are in regions, particularly around LkHα 101, where the background cloud emission is too bright to verify or rule out the presence of the compact 70 μm emission that is expected for a protostellar source. We keep these candidate protostars in our sample but note that they may indeed be prestellar in nature. Our observations are sensitive to the high end of the mass distribution in Auriga–Cal. We find that the disparity between the richness of infrared star-forming objects in Orion A and the sparsity in Auriga–Cal extends to the submillimeter, suggesting that the relative star formation rates have not varied over the Class II lifetime and that Auriga–Cal will maintain a lower star formation efficiency

    The JCMT Gould Belt Survey: constraints on prestellar core properties in Orion A North

    Get PDF
    We employ SCUBA-2 (Submillimetre Common-User Bolometer Array 2) observations of the Orion A North molecular cloud to derive column density and temperature maps. We apply a novel, Hessian-based structural identification algorithm for detection of prestellar cores to these data, allowing for automated generation of the prestellar mass function. The resulting mass function is observed to peak at 1.39−0.19+0.18M⊙1.39^{+0.18}_{{-}0.19} M_{\odot}, indicating a star-forming efficiency lower limit of ∼14 per cent when compared with the Orion nebula Cluster initial mass function (IMF) peak. Additionally, the prestellar mass function is observed to decay with a high-mass powerlaw exponent α=2.53−0.14+0.16\alpha = 2.53^{+0.16}_{{-}0.14}, indicating approximate functional similarity with the Salpeter IMF (α=2.35\alpha = 2.35). This result, when combined with the results of previous investigations suggests a regional dependence of the star-forming efficiency

    The Alchemist

    Get PDF
    JOURThis is the final version of the article. It was first published by IOP Publishing for the Royal Astronomical Society via http://dx.doi.org/10.3847/0004-637X/817/2/167We present a first look at the SCUBA-2 observations of three sub-regions of the Orion B molecular cloud: LDN 1622, NGC 2023/2024, and NGC 2068/2071, from the JCMT Gould Belt Legacy Survey. We identify 29, 564, and 322 dense cores in L1622, NGC 2023/2024, and NGC 2068/2071 respectively, using the SCUBA-2 850 μm map, and present their basic properties, including their peak fluxes, total fluxes, and sizes, and an estimate of the corresponding 450 μm peak fluxes and total fluxes, using the FellWalker source extraction algorithm. Assuming a constant temperature of 20 K, the starless dense cores have a mass function similar to that found in previous dense core analyses, with a Salpeter-like slope at the high-mass end. The majority of cores appear stable to gravitational collapse when considering only thermal pressure; indeed, most of the cores which have masses above the thermal Jeans mass are already associated with at least one protostar. At higher cloud column densities, above 1–2 × 1023 cm‑2, most of the mass is found within dense cores, while at lower cloud column densities, below 1 × 1023 cm‑2, this fraction drops to 10% or lower. Overall, the fraction of dense cores associated with a protostar is quite small (<8%), but becomes larger for the densest and most centrally concentrated cores. NGC 2023/2024 and NGC 2068/2071 appear to be on the path to forming a significant number of stars in the future, while L1622 has little additional mass in dense cores to form many new stars
    corecore